검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

PST-CLAD-STRIP

OMEGACLAD 와이어용 열전대 와이어 스트리퍼

재고가 있는 모델
  • 연속 자동 세척을 위한 더 큰 칩 포트
  • 전동 공구 어댑터 기본 제공
  • 확장된 크기 범위
PST-CLAD-STRIP
시작 279,639 원
재고가 있는 모델
OMEGACLAD 와이어용 열전대 와이어 스트리퍼 PST-CLAD-STRIP PST-CLAD-STRIP
loading all models
제품 개요
  • 단열 MgO
  • 시리즈 ID PST-CLAD-STRIP

Supported Applications

The Omega PST Series Thermocouple Wire Stripper is designed for the easy stripping of metal-sheathed or OMEGACLAD® thermocouple wire. The tool features larger chip ports to facilitate continuous self-cleaning during operation.

Operating Conditions & Performance

The series accommodates a range of nominal sheath outer diameters (OD) from 0.020 inches (0.50 mm) up to ¼ inch (6.25 mm). Each model is engineered with specific tool tolerances corresponding to its target OD; for example, the PST040A supports an OD range of 0.040 to 0.044 inches.

Unit weights vary by size class: models handling smaller diameters (e.g., PST020A through PST032A) weigh 28 g (1 oz), while mid-range units (PST040A through PST090A) weigh 71 g (2½ oz). Larger diameter strippers, such as the PST30MMA and above, have a weight of 128 g (4½ oz) or 227 g (8 oz).

Configuration Options

The series offers configurable options based on sheath size requirements. Key selection parameters include:

  • Nominal Sheath OD: Available in both Imperial and Metric designations, including 0.020 inches (0.50 mm), ⅛ inch (1.57 mm), ¼ inch (3.17 mm), and metric-specific sizes like 6.00 mm.
  • Replacement Tool Bits: Three distinct bit models are available to match the stripper size: TB125, TB188, or TB250.
  • Power Adaptors: The tool mounts in a standard drill chuck. Power adaptors are offered in sizes S, M, and L, selected according to the specific model number.

The PST Series includes 13 distinct models covering sheath ODs from 0.50 mm through 6.25 mm. Model numbers follow a pattern indicating nominal size (e.g., PST020A for 0.020 inches, PST45MMA for 4.50 mm).

Key Product Differences

Variants within the series are distinguished by their target sheath diameter and corresponding mechanical specifications:

  • PST020A to PST032A: Designed for 0.50 mm to 0.79 mm OD wire; utilize TB125 replacement bits and Power Adaptor S.
  • PST040A to PST090A: Covering 1.00 mm to 2.38 mm (⅜ inch) OD; equipped with TB188 replacement bits and Power Adaptor M.
  • PST30MMA, PST125A, PST45MMA, PST187A, PST60MMA, PST250A: Handle larger diameters from 3.00 mm to 6.25 mm; require TB250 replacement bits and Power Adaptor M or L depending on the specific model.

To order additional power adaptors, specify POWER ADAPTOR followed by S, M, or L as indicated in the selection table.

ko-KR
ko_KR
설정 저장