한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
DP7000-series
온도계 알람 또는 온/오프 제어 및 가청 버저 포함
재고가 있는 모델
- 밝은 빨간색 3자리 LED 디스플레이
- J형 또는 K형 열전대 입력
- 16 A 릴레이 출력
- 간단한 온/오프 제어 또는 알람
제품 개요
- 정확도 ± 1%
- 합금 재질 (-) 동문
- 합금 재질 (+) Chromel
- 제어 유형 켜고 꺼짐
- 디스플레이 노트 세 개의 12.7 mm (1/2") 빨간색 숫자, 플러스 기호; 업데이트 속도: 1, 2, 4 또는 8초 (조절 가능)
- 디스플레이 크기 12.7 mm (0.5인치)
- 디스플레이 유형 3자리 LED
- 외함 등급 IP64, NEMA 타입 4X
- 폼팩터 2.79인치 x 1.14인치
- 마력 등급 1hp
- 측정 유형 온도
- 메모리 백업 비휘발성
- 입력 수 1
- 작동 온도, 최대 70 °C
- 최소 작동 온도 0 °C
- 전력 소비 4 부향
- 릴레이 출력 16 A SPDT
- 릴레이 출력 사양 참고 16 A SPDT @ 240 Vac
- 해상도 1°
- 샘플, 최대 1 Hz
- 시리즈 ID DP7000-series
- 저장 온도, 최대 80 °C
- 보관 온도 최소 -20 °C
- 공급 전력 참고 115 Vac, 230 Vac, 12 Vac/Vdc 또는 24 Vac/Vdc (모델에 따라 다름)
- 온도 측정 범위 J: 0 ~ 999°C, K: 0 ~ 999°C
- 온도 센서 유형 열전쌍
- 열전쌍 타입 J, K, S
- 무게 65 g
Supported Applications
The Omega DP7000 Series Temperature Digital Controller is designed for heating and cooling applications requiring temperature monitoring with alarm or on/off control output. The series features an internal audible buzzer and a bright-red 3-digit LED display suitable for industrial chillers, environmental chambers, walk-ins, freezers, heat sealers, sterilizers, coolers, display cases, warmers, meat and produce storage, floral preservation, laboratories, food service equipment, ovens, dryers, tool rooms, and burn-in rooms.
Operating Conditions & Performance
The DP7000 Series accepts Type J or K thermocouple inputs with a measurement range of 32 to 999°F (0 to 999°C). Accuracy is specified as ±1% FS, and the display resolution is 1°. The unit operates within an ambient temperature range of 32 to 158°F (0 to 70°C) and can be stored between -4 to 176°F (-20 to 80°C). Enclosure protection meets NEMA 4X (IP64) ratings. Installation warnings specify that the unit must be mounted away from vibration, impacts, water, and corrosive gases, and probe cables should not be installed near power cables.
Control & Alarm Parameters
The controller supports programmable parameters including set point (SP), hysteresis (r0: 1 to 99 Degrees), cycle time (c0: 0 to 999 Seconds), and ambient probe adjustment. The output is an SPDT relay rated at 16A @ 240 VAC resistive, configured for simple on/off control or alarm functions.
Response Time Configuration
Probe response time (P6) is configurable via parameter settings: 0=8 sec, 1=4 sec, 2=2 sec, and 3=1 sec. The unit includes error and alarm warning capabilities with password protection for the silicone front keypad.
Configuration Options
The series is available in eight distinct models (DP7001 through DP7008) configured by power supply voltage, temperature scale display, and input type. All variants support Type J or K thermocouple inputs; the manual notes that parameter P5 allows selection of tcJ, tch, or tcS.
Power Supply & Display Options
- 115 VAC: DP7001 (°F), DP7002 (°C)
- 230 VAC: DP7003 (°F), DP7004 (°C)
- 12 VAC/VDC: DP7005 (°F), DP7006 (°C)
- 24 VAC/VDC: DP7007 (°F), DP7008 (°C)
Housing & Dimensions
The unit features a front panel with overall dimensions of 75 mm width x 34 mm height and a depth of 69 mm. The required cutout for the panel is 71 x 29 mm (2.80 x 1.14"). Electrical connections are made via terminals: Probe input at terminals 1,2; Power Supply at 7,8; and Output at 9,10,11 with NC, COM, NO configurations.
Approvals & Accessories
The series carries CE and UL (cUR) certifications. An optional noise suppression kit (CNQUENCHARC) is available for 110 to 230 Vac applications.
Key Product Differences
Variants within the DP7000 Series differ primarily by power supply voltage and display unit selection. Models ending in odd numbers (DP7001, DP7003, DP7005, DP7007) are configured for Fahrenheit (°F), while even-numbered models (DP7002, DP7004, DP7006, DP7008) display Celsius (°C). The input type is listed as Type J/K across the standard model lineup in the data sheet "To Order" table. All variants share identical physical dimensions, enclosure ratings, and relay output specifications.
PDF 및 매뉴얼