한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Model-166T
텔레스코핑 피토 튜브, 11.5-36 인치, 스테인리스 스틸, 휴대용 케이스 포함
- 조절 가능한 길이로 최대 5개의 고정 길이 피토관 대체 가능
- 산업용 등급 스테인리스강(예: 304/316 SS)
- 1.8" 직경의 반구형 팁은 1.0 유량 계수를 가짐
제품 개요
- Coefficient de débit 1
- Taille du port 1 1/8 po ; 1/4 po
- Type du port 1 Raccord cannelé
- Taille du port 2 1/8 po ; 1/4 po
- Type du port 2 Raccord cannelé
- ID de série Model-166T
- Longueur de la pointe 1.8 in
Supported Applications
The Dwyer Model 166T Telescoping Pitot Tube is an adjustable length instrument designed for sensing air flow in a wide range of duct sizes. It serves as a portable solution for almost any air velocity measurement where permanent mounting is not required.
- Air velocity and air flow measurements
Operating Conditions & Performance
The Model 166T features an adjustable insertion length ranging from 11.5 to 36 inches (29.2 to 91.4 cm), allowing it to replace up to five conventional fixed-length Pitot tubes. The telescoping sections lock in place as they are extended, enabling the use of a handheld grip to gauge proper alignment with the airstream.
- Media compatibility: Clean air flow free from particulates that could cause blockage
Configuration Options
The series is constructed primarily of stainless steel and includes specific design features for portability and operation:
- Housing Material: Stainless steel telescoping tube with a black hand grip.
- Carrying Case: Includes a custom-fitted polyethylene carrying case to protect the instrument.
- Sensing Tip: Features very small sensing holes on the tip; requires flow reasonably clean and free from particulates.
Dimensions
- Diameter at handle: 7/16" [11.11]
- Handle length: 11-15/32" [291.3]
- Overall extended length: Up to 40-7/16" (approx. 1027 mm) including handle and tubing
Connections & Accessories
- Tubing: Flexible rubber tubing with terminal block connections marked 'S' for static pressure and 'T' for total pressure.
- Manometer Connection: Connect the static pressure to the minus (-) or low pressure port, and the total pressure to the positive (+) or high pressure port on a manometer or gage.
Key Product Differences
The Model 166T is offered as a single telescoping configuration. The design allows for quick adjustment of insertion length without requiring multiple fixed-length probes. Users must ensure the flexible rubber tubing moves freely through the opening in the end of the handle when extending or collapsing the tube.
- Tip extension requirement: The 1/8" diameter tip should always be extended to its full 3" (76.2 mm) length regardless of how far the telescopic sections are extended.