한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
LCKD
소형 버튼 압축 하중 셀
재고가 있는 모델
- 5점 NIST 추적 교정 포함
- 견고한 전 산업용 등급 스테인리스강(예: 304/316 SS)
제품 개요
- 5점 보정 0%, 50%, 100%, 50%, 0%
- 추가 기능 1 온도 보상 보드
- 브리지 저항 350 Ω
- 케이블 길이 5 ft
- 보정 옵션 5 포인트 NIST
- 전기 연결 케이블
- 전기 출력 2 mV/V
- 외함 등급 IP54
- 힘 유형 압축
- 풀 스케일 편차 0.003 in
- 히스테리시스 ± 0.25 %
- 선형성 ± 0.25%
- 로드셀 타입 버튼
- 재료 스테인리스 스틸
- 작동 온도, 최대 121 °C
- 최소 작동 온도 -54 °C
- 과부하, 최대 300% FS
- 공정 온도, 최대 71 °C
- 최소 공정 온도 16 °C
- 반복성 ± 0.10%
- 안전 과부하 150% FS
- 시리즈 ID LCKD
- 공급 전력 참고 5 Vdc, 최대 7 Vdc
- 공급 전압 5 Vdc
- 열적 스팬 효과 ± 0.018% FSO/°C
- 열 영점 효과 ± 0.009% FSO/°C
- 무게 0.5 oz
- 배선/커넥터 테이블 적색: (+) 여기; 흑색: (-) 여기; 녹색: (-) 출력; 백색: (+) 출력
- 영점/밸런스 오차 ± 2%
Supported Applications
The Omega LCKD Series consists of subminiature, button-style compression load cells designed for measuring compressive forces in industrial and test environments. These units are engineered as highly cost-effective solutions suitable for severe operating conditions where space is constrained. The series utilizes high-quality strain gages and precision manufacturing techniques to provide reliable force measurement.
Each LCKD unit features a load button machined as an integral part of the cell, requiring installation on a flat surface with a diameter matching the D1 dimension for proper operation. These products are not designed for use in human applications.
Operating Conditions & Performance
The LCKD Series operates within an ambient temperature range of -65° to 225°F (-54 to 107°C), with a compensated temperature range specified as 60 to 160°F (16 to 71°C). The cells are constructed from stainless steel and carry an IP54 enclosure rating. Performance specifications include linearity of ±0.25% FSO, hysteresis of ±0.25% FSO, repeatability of ±0.10% FSO, and zero balance of ±2% FSO.
Temperature effects are documented as 0.01% full scale/°F for Zero and 0.01% of reading/°F for Span. The bridge resistance is a minimum of 350 Ω using bonded foil gages, with an excitation voltage requirement of 5 Vdc (7 Vdc maximum). Full-scale deflection ranges from 0.001" to 0.003", and the safe overload limit is rated at 150%.
Configuration Options
The series offers a broad measurement envelope covering capacities from 1 kg (9.8 N) up to 1000 lb (4448 N). Standard inch-based models include LCKD-1KG, LCKD-5, LCKD-10, LCKD-25, LCKD-50, LCKD-100, LCKD-250, LCKD-500, and LCKD-1000. Metric models (LCMKD) are also available in the series documentation with capacities ranging from 10 N to 5000 N.
Key configurable dimensions vary by capacity range:
- Low Capacity Range (1 kg to 50 lb / 10 to 200 N): D1 diameter of 9.6 mm (0.38"), H height of 3.0 mm (0.12").
- Mid Capacity Range (100 to 250 lb / 500 to 1000 N): D1 diameter of 13 mm (0.50"), H height of 3.8 mm (0.15").
- High Capacity Range (500 to 1000 lb / 2000 to 5000 N): D1 diameter of 19 mm (0.75"), H height of 6.4 mm (0.25").
All units include a 1.5 m (5 ft) four-conductor insulated cable with an integrated temperature compensation board. The output signal is nominally 2 mV/V, and each unit ships with a calibration sheet stating full-scale output.
Electrical Connections
The wiring code for the LCKD Series is standardized as follows:
- RED: (+) EXCITATION
- BLACK: (-) EXCITATION
- GREEN: (-) OUTPUT
- WHITE: (+) OUTPUT
Key Product Differences
The LCKD Series is distinguished by its subminiature button form factor and all-stainless-steel construction. The series includes both standard inch-based models (LCKD prefix) and metric-capacity variants (LCMKD prefix), though the primary focus of this bundle is the LCKD line.
Physical dimensions, specifically D1 diameter and H height, scale with capacity to maintain structural integrity across ranges from 2.2 lb up to 1000 lb. The series incorporates a miniature printed circuit board within the lead wire for temperature compensation; this component must not be removed or cut between the board and load cell, as doing so voids calibration and warranty.
Calibration is provided via a 5-point NIST-traceable process with shunt data included. Compatible meters listed in documentation include DPIS, DP41-S, DP25B-S, and iSeries models for specific capacities.
액세서리
accessories
1/8 DIN Thermocouple and RTD Panel Meter with Large, Selectable Color Display
779,799원 / 개당
0 재고 있음