Skip to search Skip to main content Skip to navigation

Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

Series-TE-TNS

Stainless Steel Thermowells for Sensors – Corrosion Resistant, Easy Install

센서용 스테인리스 스틸 써모웰 – 내식성, 설치 용이
  • 구성 가능한 재료 및 크기
  • 제작(용접) 또는 가공 구조
  • 1/2" 또는 3/4" NPT 공정 연결
Series-TE-TNS
From 29,427 원
센서용 스테인리스 스틸 써모웰 – 내식성, 설치 용이 Series-TE-TNS Series-TE-TNS
loading all models
Product Overview
  • 응용 분야 보일러, 화학물질, 석유, 냉장, 냉동 장비
  • 시리즈 ID Series-TE-TNS

Supported Applications

The Dwyer Series TE-TNS Stainless Steel Thermowells separate temperature instruments from surrounding process media. They are designed for use with the Series TE and TE-I Immersion Temperature Sensors to provide protection against aggressive media, high pressures, and flow rates. The thermowell design allows for quick installation of sensors without draining the process.

Operating Conditions & Performance

The series supports two construction methods with distinct performance envelopes:

  • Fabricated (welded): Process temperature up to 1000°F (538°C); pressure rating of 140 psi.
  • Machined: Process temperature up to 1200°F (648°C). Pressure ratings vary by material: 3700 psi for 304 SS and 5500 psi for 316 SS.

The wetted materials are available in 304 Stainless Steel or 316 Stainless Steel to provide corrosion resistance. Fabricated units consist of a tube closed at the tip by a welded solid tip, while machined thermowells are manufactured from barstock.

Configuration Options

The Series TE-TNS offers configurable lengths and connection types across its model range:

  • Lengths: Available in 2.5", 4", 6", 8", 9", 12", and 18" options.
  • Materials: Offered in 304 SS or 316 SS.
  • Construction Types: Fabricated (welded) or Machined.

Process connections vary by model and construction type. Machined thermowells feature internal/external connection pairs such as "1/4" NPT / 1/2" NPT" or "1/2" NPT / 3/4" NPT." Fabricated (welded) models utilize a "1/2" NPSM / 1/2" NPT" configuration. The model number guide follows the format TE-TNS-- (example: TE-TNS-N254N-12).

Key Product Differences

Variants within the series are distinguished by material grade, construction method, and insertion length. Machined models include part numbers such as TE-TNS-N044N-12 (304 SS) and TE-TNS-N065N-14 (316 SS). Fabricated models, identified in the model chart with a "Fabricated" construction designation, are available only in 304 SS for lengths ranging from 2.5" to 18".

en-AU
ko_KR
Save Configuration