검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-160S

스테인리스 스틸 피토관, 공기 흐름 측정용, 1인치 MNPT

  • 대형 5/16" 스테인리스 강 튜빙은 열악한 조건에서도 막힘에 강함
  • 1/8" FNPT 연결부는 장치에 영구 용접됨
  • 최대 1500°F(815.5°C) 및 100 psig(6.89 bar)까지 사용 가능
Series-160S
시작 517,191 원
스테인리스 스틸 피토관, 공기 흐름 측정용, 1인치 MNPT Series-160S Series-160S
loading all models
제품 개요
  • 재료 스테인리스 스틸
  • 최대 작동 압력 100 psi
  • 작동 온도, 최대 1500 °F
  • 압력 유형 궤간
  • 프로세스 연결 크기 1/8인치
  • 프로세스 연결 유형 NPT 암나사
  • 시리즈 ID Series-160S

Supported Applications

The Dwyer Series 160S "S" Type Pitot Tubes are designed for flow measurement in dirty, particulate-laden air or gas streams. These instruments serve environmental testing fields and smoke stack applications where large-diameter tubing is required to avoid plugging under harsh conditions.

Operating Conditions & Performance

The Series 160S operates with process temperatures up to 1500°F (815.5°C) and pressure ratings up to 100 psig (6.89 bar). Measurement capabilities cover velocity pressures from 0.01 to 4.0 inches of water, corresponding to air velocities ranging from low-flow conditions up to 14,000 FPM depending on the traverse method used.

Accuracy is documented as ±5% for tests run using the recommended traverse method and ±2% for maximum accuracy in laboratory applications. The probe features a 5/16" diameter stainless steel construction with total pressure openings facing upstream and static pressure openings facing downstream, both perpendicular to airflow.

Installation Requirements

  • Duct diameter should be 4" or larger.
  • Take readings in a smooth, straight duct section: minimum 62 duct diameters upstream and 12 diameters downstream.
  • An egg-crate type straightener is recommended upstream.

Configuration Options

The series offers configurable insertion lengths of 18, 24, 36, 48, 60, and 72 inches. Models are available in standard configurations or as Permanent Mount (PM) versions.

  • Process Connections: Standard models feature 1/8" FNPT connections permanently welded to the unit. PM models include a 1 inch dia. welded stainless steel sleeve and adjustable compression fitting with 1 inch male NPT mounting threads.
  • Housing & Materials: Constructed from stainless steel tubing (5/16" diameter) for both total and static pressure lines to resist plugging in particulate-laden streams.
  • Accessories: A carrying case (Model A-160-CASE) is available for pitot tubes up to 48". Two barbed tubing adapters for 3/16" I.D. rubber or vinyl tubing are included with the unit.

Key Product Differences

The Series 160S distinguishes between standard portable models and Permanent Mount (PM) configurations based on installation needs:

  • Standard Models (e.g., 160S-18): Designed for temporary or handheld testing with 1/8" FNPT connections.
  • Permanent Mount Models (e.g., 160S-18PM): Include a 1 inch dia. welded stainless steel sleeve and adjustable compression fitting with 1 inch male NPT mounting threads to allow depth adjustment and locking in place.

Note: For permanent-mount models, insertion lengths over 24" (61 cm) are not recommended due to the risk of excessive deflection. Total pressure tubes and static pressure tubes on these units are precisely aligned and welded together every 6 inches for maximum accuracy, strength, and long-term durability.

ko-KR
ko_KR
설정 저장