한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
ARTMO-HEATER
스테인리스 스틸 침지 히터 1인치 NPT 경량 오일 온도 조절기
옵션 제공:
- 내장 온도 조절기 — 세 가지 온도 범위 제공
- 0.25 ~ 0.50 kW
- 120 및 240 V, 단상
- 직경 0.315인치 중량 강철 피복
제품 개요
- 추가 기능 적분 온도 조절기
- 폼팩터 스크류 플러그 침수
- 가열 매체 오일
- 가열 요소의 수 1
- 단계 수 1
- 전력 밀도 20 W/in²
- 프로세스 연결 크기 1인치
- 프로세스 연결 유형 NPT 수나사
- 시리즈 ID ARTMO-HEATER
- 외장 직경 0.315 in
- 보호관 재질 강철
Supported Applications
The Omega ARTMO Series consists of lightweight oil immersion heaters with integral thermostats designed for temperature control in low viscosity oils, hydrocarbon-based coolants, and heat transfer oils. These units feature a 1 NPT steel fitting process connection suitable for direct immersion into fluid reservoirs.
Operating Conditions & Performance
The ARTMO series operates with an integral thermostat providing temperature control across three distinct ranges: 60 to 187°F, 60 to 240°F, and 0 to 127°F. The heating element is housed in a heavy-duty steel sheath with a diameter of 0.315 inches, utilizing magnesium oxide refractory (MgO) insulation.
The series supports power supplies of 120 Vac and 240 Vac at 1 Phase. Watt density for the standard configuration is listed as 20 W/in². The overall length dimension B varies by model from 6⅛ (17) cm (in) to 12½ (32) cm (in). A critical safety note states that the integral thermostat functions as a temperature control only and is not a fail-safe device; an approved pressure and/or temperature control should be used with these heaters to assure safe operation.
Configuration Options
The ARTMO series offers configurable options for power, voltage, temperature range, and enclosure type. The model number structure follows the format ARTMO-<kW>-<Voltage>-<Temp Range>-<Enclosure Type>.
- Power Ratings: Available in 0.250 kW, 0.375 kW, and 0.500 kW.
- Voltage Options: Configurable for 120 Vac or 240 Vac (insert "120" or "240" in the model number).
- Temperature Ranges: Standard range is 60 to 187°F; high-temperature models extend to 240°F, and low-temperature models start at 0°F.
- Enclosure Types:
- E1: General Purpose Enclosure (UL Listed and CSA certified).
- E2: Moisture Resistant/Explosion Resistant Enclosure (CSA NRTL/C certified; not intended for use in hazardous areas).
- Electrical Connection: 1.25 NPT conduit hubs on one side, with the other plugged.
The series weight ranges from 2 (1) lb (kg) to 6 (3) lb (kg), depending on power and enclosure selection.
Key Product Differences
Variants within the ARTMO series are distinguished by their heating capacity, voltage rating, thermostat range suffixes, and enclosure classification. The model number indicates these specific configurations:
- kW Designation: Model numbers include "250" for 0.250 kW, "375" for 0.375 kW, or "500" for 0.500 kW.
- Voltage Suffixes: Models ending in "/120" are available only at 120 Vac; other models allow voltage selection via the model number construction (e.g., ARTMO-375/240).
- Temperature Range Codes: The suffix "TH" denotes the 60 to 240°F range, while "TL" indicates the 0 to 127°F range. Models without these suffixes default to the standard 60 to 187°F range.
- Enclosure Codes: The prefix or inclusion of "E2" in the model number (e.g., ARTMO-375E2) specifies the Moisture Resistant/Explosion Resistant Enclosure, whereas models without this designation feature the General Purpose E1 enclosure.
PDF 및 매뉴얼