검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

SLK-SLF

1/4인치 직경 프로브용 스프링 장착 피팅

재고가 있는 모델
  • ¼" 직경 프로브(RTD, 열전대 또는 서미스터)에 손쉬운 설치
  • 자체 고정 스프링 설계로 무한 조절 가능
  • 써모웰 내 교체 센서 설치에 적합
  • 스프링 장착 피팅은 다양한 ½ NPT 연결 헤드와 함께 사용 가능
SLK-SLF
시작 60,819 원
재고가 있는 모델
1/4인치 직경 프로브용 스프링 장착 피팅 SLK-SLF SLK-SLF
loading all models
제품 개요
  • 내경 0.25 m
  • 프로세스 연결 크기 1/2인치
  • 프로세스 연결 유형 NPT 수나사
  • 시리즈 ID SLK-SLF
  • 보호관 재질 스테인리스 스틸

Supported Applications

The Omega SLK/SLF series provides spring loading options designed for the installation of sensors into thermowells and other applications. These fittings are engineered to simplify sensor installation on any ¼" diameter probe, including RTD, Thermocouple, or Thermistor types. The self-gripping spring design offers unlimited adjustability, making these components suitable for installing replacement sensors in existing thermowell configurations.

Operating Conditions & Performance

The series is manufactured to be RoHS compliant and Made in USA. While specific operating temperature ranges or pressure ratings are not defined in the source documentation, the spring material is specified as 0.89 (0.035) diameter music wire conforming to ASTM A228.

Configuration Options

The SLK/SLF series supports two primary configurations for ½ NPT connection heads and ports:

  • ¼-SLK Spring Loading Kit: Includes a hex housing with ½ NPT male thread and a self-gripping spring. The overall dimension of the hex housing is 26.97 mm (1.062 in).
  • SLF-12-12-14 Spring Loaded Fitting: A fitting with ½ NPT male threads on both ends, containing a self-gripping spring inside the housing. The overall dimension is 47.75 mm (1.88 in).

Both variants are designed for probes with a diameter of 0.25" (¼"). Installation instructions are included with each unit.

Installation and Adjustment Details

  • For the ¼-SLK: The hex housing slides onto the probe with the ½ NPT threads oriented toward the thermowell or attachment point. The self-gripping spring is then slid onto the probe with the wide end facing the hex housing and positioned as needed.
  • For the SLF-12-12-14: Installation involves sliding the probe tip into the larger opening of the fitting, twisting clockwise while pushing through. The assembly can be pulled to re-adjust the position if required.

Dimensional Specifications

  • Gripping end of spring (SLF-12-12-14): 44.45 mm (1.75 in).
  • Housing dimensions: As noted above for the specific model variants.

Key Product Differences

The primary distinction between the two models lies in their physical configuration and intended mounting interface:

  • The ¼-SLK is a spring loading kit comprising a separate hex housing with ½ NPT threads, designed to be assembled onto an existing probe.
  • The SLF-12-12-14 is a complete fitting featuring ½ NPT male threads on both ends with the self-gripping spring pre-installed within the housing structure.
ko-KR
ko_KR
설정 저장