한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-3500
스마트 차압 트랜스미터, HART®, ATEX/IECEX, 맞춤형
- 고정밀도 (± 0.075% FS)
- 범위 조정 가능 (최대 25:1)
- 제로/스팬 버튼을 사용한 완전 구성 가능 (교정기 불필요)
- 고장 모드 프로세스 기능
- 자동 주변 온도 보상
제품 개요
- 정확도 ± 0.075%
- 정확도 세부 사항 ± 0.075% FS (@ 20 °C)
- 응용 분야 화학물질, 필터 모니터링, 유체 측정 및 제어, 음식 및 음료, 연료 및 가스, 수위 모니터링 및 제어, 석유, 석유화학, 펌프 제어
- 규정 준수 노트 CE; -IS, -FP 접미사: ATEX 준수 CE 0518 II 2G ia/db IIC T6/T5 Gb Ta<80 °C, T5 / II 2D Ex ia/tb IIIC T85 °C/T100 °C Db. 형식 인증 번호 KDB 17ATEX0056X. ATEX 표준: EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-11:2012, EN 60079-26:2015, EN 60079-31:2014 IECEx 준수: Ex ia/db IIC T6/T5 Gb / Ex ia/tb IIIC T85 °C/T100 ° Db. 적합성 인증서 IECEx KDB 17.0008X. IECEx 표준: IEC 60079-0:2011, IEC 60079-1:2014-06, IEC 60079-11:2011, IEC 60079-26:2006, IEC 60079-31:2013.
- 감쇠 시간 0~60초
- 전기 연결 나사 단자 블록 포함 1/2인치 NPT 암나사 컨듀잇
- 전기 출력 4 ~ 20 mA
- 외함 등급 IP66, IP67, NEMA 타입 4X
- 장기 안정성 ≤0.075% FSO/3년
- 재료 알루미늄
- 접액부 재질 316L 스테인리스 스틸, FKM
- 미디어 호환성 연료 가스, HVAC / 실내 공기, 비활성 가스/비반응성 가스, 증기
- MTBF 1,000,000시간
- 출력 신호 현재
- 압력 유형 차동
- 프로세스 연결 크기 1/4인치
- 프로세스 연결 유형 NPT 암나사
- 응답 시간 16~480 ms
- 시리즈 ID Series-3500
- 전원 유형 DC
- 공급 전압 10 ~ 55 Vdc
- 열 효과 < ± 0.05% 스팬/10 °C
Supported Applications
The Dwyer Series 3500 is a microprocessor-based smart differential pressure transmitter designed for flow measurement, level monitoring, filter or pump differential pressure applications, and critical process monitoring. The series measures compatible gases, steam, liquids, or vapors.
Operating Conditions & Performance
The Series 3500 delivers an accuracy of ±0.075% FS (@20°C) with a stability of ≤0.075% FSO/3 years and rangeability up to 25:1 turn down. Thermal effects are compensated by transmitter software, specified as <±0.05% span/10°C.
Operating temperature limits are -40 to 185°F (-40 to 85°C) for ambient conditions and -40 to 400°F (-40 to 204°C) for process temperatures when configured with a diaphragm seal (-DS). The unit features an enclosure rating of NEMA 4X IP66/IP67. Response time is programmable from 16 to 480 ms, and damping time ranges from 0 to 60 s.
Configuration Options
The series supports a wide configuration envelope including differential pressure or level applications with flexible calibration via push buttons. Key configurable dimensions include:
- Housing Materials: Aluminum (-AL) or Stainless steel (-AS).
- Process Connections: 1/4˝ female NPT (-NF) or diaphragm seal selection (-DS). Diaphragm seals are available as S-P flush (direct mount high side, capillary mount both sides/high side) and S-T extended types.
- Electrical Connections: Packing gland M20x1.5 (-1), two 1/2˝ female NPT conduit (-2), or screw terminal options.
- Output Signal: 4-20 mA with HART Communication (rev.5.1).
- Hazardous Location Approvals: Configurable as ATEX Compliant and IECEx Compliant via -IS (intrinsically safe) or -FP (flameproof) suffixes.
The series supports wetted materials of 316L SS and FPM; with diaphragm seals, the material is 316L SS. Power requirements are 10-55 VDC, with loop resistance for operation from 0 to 1500 Ω.
Key Product Differences
The Series 3500 model number structure defines specific configurations including housing type (-AL or -AS), measuring range codes (e.g., -02 for -10 to 10 in w.c. up to -40 for 0 to 1000 psi), and process connection types. Diaphragm seal variations include direct mount high side, capillary mount both sides, and specific flange sizes such as 2˝ ANSI (A) or 3˝ DN80 (D). Extension lengths are available in increments of 2˝ to 6˝, with capillary lengths configurable from 1 to 20 feet. Optional accessories include stainless steel tag plates (-MT, -ST), mounting brackets (-GB, -SB, A-630, A-631), flanged valve block manifolds (BBV-1F, BBV-22F), and NIST traceable calibration certificates (-NIST).
하우징
범위
공정 연결부
전기 연결
다이어프램 실 타입
장착 플랜지
ko-KR
ko_KR
설정 저장


