검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

SGT-Full-Bridge-Shear

전단, 트랜스듀서 품질의 풀 브리지 스트레인 게이지

  • 정밀 변환기 품질 게이지
  • 350 또는 700옴 브리지
  • 강철 또는 알루미늄에 대해 보상됨
  • 2 하프 브리지 패턴은 1 풀 휘트스톤 브리지로 사용 가능
SGT-Full-Bridge-Shear
시작 358,628 원
전단, 트랜스듀서 품질의 풀 브리지 스트레인 게이지 SGT-Full-Bridge-Shear SGT-Full-Bridge-Shear
loading all models
제품 개요
  • 격자 스타일 풀 브리지, 전단 패턴, 2 하프 브리지와 공통 리드
  • 작동 온도, 최대 95 °C
  • 최소 작동 온도 -75 °C
  • 팩 크기 5
  • 시리즈 ID SGT-Full-Bridge-Shear
  • 힘들어, 최대 30,000 μm

Supported Applications

The Omega SGT Full Bridge Shear series provides transducer quality strain gages designed for shear and torsional strain applications. These components are utilized in the design of shear beam load cells and can be applied to measure reaction torque on a shaft.

Operating Conditions & Performance

The SGT series consists of full bridge configurations where four strain gages are mounted on one carrier piece, allowing two half bridges to function as one full Wheatstone bridge. The series offers nominal resistance options of 350 Ω and 700 Ω depending on the specific model pattern selected.

Maximum permitted bridge energizing voltage (Vrms) varies by termination type and temperature compensation material:

  • Ribbon Leads with Steel Compensation (ST): Models SGT-2DD/350-SY11 and SGT-3/700-FB11 support a maximum of 9 Vrms and 11 Vrms respectively.
  • Solder Pads with Steel Compensation (ST): Models SGT-2DD/350-SY41 and SGT-3/700-FB41 support a maximum of 9 Vrms and 11 Vrms respectively.
  • Ribbon Leads with Aluminum Compensation (AL): Models SGT-2DD/350-SY13 and SGT-3/700-FB13 support a maximum of 13 Vrms and 16 Vrms respectively.
  • Solder Pads with Aluminum Compensation (AL): Models SGT-2DD/350-SY43 and SGT-3/700-FB43 support a maximum of 13 Vrms and 16 Vrms respectively.

Configuration Options

The series is configurable across two primary gage patterns, resistance values, termination methods, and temperature compensation materials. The model number guide follows the format SGT-<SERIES>-<RESISTANCE>-<PATTERN>-<TERMINATION>.

Gage Patterns and Dimensions

  • SGT-2DD Pattern: Features dimensions of 1.6 mm (0.063), 1.7 mm (0.067), 7.6 mm (0.299), and 8.9 mm (0.350). This pattern is available with a nominal resistance of 350 Ω.
  • SGT-3 Pattern: Features dimensions of 1.9 mm (0.075), 3.4 mm (0.134), 9.8 mm (0.386), and 8.2 mm (0.323). This pattern is available with a nominal resistance of 700 Ω.

Termination Options

  • Ribbon Leads: Available on models ending in SY11, SY13, FB11, and FB13.
  • Solder Pads: Available on models ending in SY41, SY43, FB41, and FB43.

Temperature Compensation Materials

  • ST (Steel): Models designated with 1 or 4 as the second digit of the suffix code (e.g., SY11, SY41).
  • AL (Aluminum): Models designated with 3 as the second digit of the suffix code (e.g., SY13, SY43).

Key Product Differences

Variants within the SGT series are distinguished by their gage pattern size, nominal resistance, and termination style. The 350 Ω models utilize the smaller SGT-2DD carrier piece (7.6 mm actual size), while the 700 Ω models utilize the larger SGT-3 carrier piece (9.8 mm actual size). Each model is supplied as a package of 5 units.

Selection between Ribbon Leads and Solder Pads determines the specific maximum voltage rating for each temperature compensation material, with Aluminum compensated versions generally supporting higher energizing voltages than Steel compensated versions within the same termination category. For strain gage accessories, users are directed to visit Omega online.

액세서리

120 Ω Resistor network
AUD233.28 / each
37 재고 있음
350 Ω
AUD35.38 / each
0 재고 있음
Cold-Curing Strain-Gage Adhesive
보낸 사람 AUD30.51
0 재고 있음
ko-KR
ko_KR
설정 저장