Skip to search Skip to main content Skip to navigation

Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

SA1-RTD-B-series

Self-Adhesive Polyimide Fast Response RTD Surface Sensors, Class B Accuracy

자기 접착 폴리이미드 고속 응답 RTD 표면 센서, 클래스 B 정확도
Models In Stock
  • 100 Ω 박막 DIN 백금 Class B(0 °C에서 ±0.12 Ω, ±0.30 °C) 정확도 표준
  • 260 °C(500 °F)까지 내열 실리콘 접착제
  • 온도 범위 -73~260 °C 연속 사용, OMEGABOND Air Set 시멘트와 함께 설치 시 290 °C(554 °F) 단기 사용 가능
  • 1 m(40 in) 길이로 재고 보유
SA1-RTD-B-series
From 323,579 원
Models In Stock
자기 접착 폴리이미드 고속 응답 RTD 표면 센서, 클래스 B 정확도 SA1-RTD-B-series SA1-RTD-B-series
loading all models

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview
  • 정확도 클래스 B
  • 정확도 세부 사항 100 Ω 박막 DIN 백금 클래스 “B” (0 °C에서 ± 0.12%) 정확도 표준
  • 단열 PFA
  • 장착 Class DIN 백금
  • 명목상 저항 100 Ω
  • 팩 크기 3
  • 공정 온도, 최대 260 °C
  • 최소 공정 온도 -73 °C
  • 응답 시간 수중 침지: <0.9 s ; 핫플레이트 위: <2 s
  • 시리즈 ID SA1-RTD-B-series
  • 온도 계수 0.00385 Ω/Ω/ °C
  • 온도 계수 사양 참고 α = 0.00385 Ω/Ω/°C
  • 온도 센서 유형 RTD
  • 와이어 게이지 26 AWG

Supported Applications

The Omega SA1-RTD Series consists of self-adhesive polyimide fast response RTD surface sensors designed for flexible surface temperature measurement. These thin-film platinum resistance detectors are engineered to mount directly onto clean, dry surfaces using a silicone adhesive backing with paper peel protection.

Operating Conditions & Performance

The series utilizes 100 Ω at 0°C platinum film elements conforming to DIN Class 'B' accuracy. The standard measurement range is -73 to 260°C (-99 to 500°F) for continuous operation, with short-term capability up to 290°C (554°F) when installed using OMEGABOND® Air Set Cements.

Performance specifications include a resistance tolerance of ±0.12% at 0°C and fast thermal response times: less than 0.9 seconds for 63% response in water flowing at 3' per second, and less than 2 seconds on a hot plate. The sensor pad dimensions are 25 x 25 x 3 mm (1.00 x 1.00 x 0.122").

Configuration Options

The SA1-RTD-B series is configurable across wire lengths, connector types, and wiring configurations to suit specific installation needs.

  • Wire Lengths: Standard options include 1 m (40"), 2 m (80"), and 3 m (120"). Custom lead wires longer than 120" are available by modifying the model suffix, with cost added per additional 12".
  • Connectors: Models may be ordered with MTP connectors or a standard size 3-pin OTP connector. An audio-style TA3F connector is also an option for specific termination requirements.
  • Wiring Configuration: The series features 3-wire construction as standard, color-coded per IEC-60751 and ASTM-E-1137. A 2-wire style is available by inserting '2W' after the 'B' in the part number.
  • Packaging: Sensors are sold in convenient packages of three units.

The sensor construction includes a polyimide base layer with silicone adhesive, topped with fiberglass tape and polyimide tape for electrical isolation. Extension wires consist of #26 AWG stranded nickel-plated copper that is PFA insulated and jacketed.

Key Product Differences

Variants within the SA1-RTD-B series are distinguished by their wire length suffixes (e.g., -80 for 80", -120 for 120") and connector designators. The base model number SA1-RTD-B denotes a sensor with standard lead wires, while adding -MTP, -OTP, or -TA3F specifies the termination type.

The series offers specific ordering modifications for 2-wire configurations and extended lengths. For example, replacing 'MTP' with 'OTA' provides a standard size 3-pin connector at no additional cost, whereas selecting the TA3F audio connector incurs an additional charge per pack. The model number guide follows the format: SA1-RTD-B - [Wire Length] - [Connector Type].

SA1-RTD-B-2W-4W-80-120-MTP-OTP-TA3F-TA4F
와이어 스타일
와이어 길이
커넥터
en-AU
ko_KR
Save Configuration