검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-681

위생용 압력 트랜스미터, 3A 준수, 간편 설치, 내수성

  • 완전 밀폐되어 CIP(Clean-in-Place) 및 SIP(Sterilize-in-Place) 설치를 견디며 위생 공정의 규제 조건을 지원합니다
  • 위생용 클램프 피팅으로 설치가 용이합니다
Series-681
시작 3,416,841 원
위생용 압력 트랜스미터, 3A 준수, 간편 설치, 내수성 Series-681 Series-681
loading all models
제품 개요
  • 정확도 ± 0.2%
  • 정확도 세부 사항 ± 0.20% FS (비선형성, 히스테리시스 및 비반복성 포함)
  • 파열 압력 최대 50 psi
  • 클램핑 효과 제로 및 스팬 쉬프트: ± 0.15% FS
  • 최대 보상 온도 180 °F
  • 최소 보상 온도 20 °F
  • 전기 연결 케이블 포함 1/2인치 NPT 수나사 컨듀잇
  • 전기 출력 4 ~ 20 mA
  • 루프 저항 800 Ω
  • 접액부 재질 316L 스테인리스 스틸
  • 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, 정제 공정 / 냉각수, 호환 가능한 액체, 비활성 가스/비반응성 가스, 오일 / 윤활제, 유기 용매
  • 와이어 수 2
  • 작동 온도, 최대 260 °F
  • 최소 작동 온도 -40 °F
  • 출력 세부 정보 4~20 mA
  • 출력 신호 현재
  • 압력 유형 궤간
  • 프로세스 연결 크기 2인치
  • 프로세스 연결 유형 트라이클램프
  • 상대 습도 10~90% RH, 비응축
  • 응답 시간 ≤ 10 ms
  • 시리즈 ID Series-681
  • 스팬 조정 ± 0.5 mA, 비인터랙티브
  • 전원 유형 DC
  • 공급 전압 9 ~ 30 Vdc
  • 열 효과 영점 및 스팬 변동: ± 2.0% FS/100 °F
  • 무게 227 g
  • 제로 설정 조절 범위 ± 0.5 mA, 비상호 간섭형

Supported Applications

The Dwyer Series 681 Sanitary Pressure Transmitter is designed for sanitary installations according to 3A Standard #37-01. The series serves applications in food, dairy, beverage, and pharmaceutical processing. It supports liquid level control and monitoring within sanitary pipelines.

The unit features a fully sealed design intended to withstand high-pressure wash-down environments typical of Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The transmitter is insensitive to vibration, shock, EMI/RFI interference, and thermal shocks associated with these processes.

Operating Conditions & Performance

The Series 681 operates within a process temperature range of -40°F to 260°F (-40 to 125°C). The compensated ambient temperature range is specified as 20 to 180°F (-7 to 80°C), with humidity limits of 10 to 90% RH, non-condensing.

Performance specifications include an accuracy of ±20% FS (includes non-linearity, hysteresis and non-repeatability). The response time is documented as ≤ 10 ms. Thermal effects result in a zero and span shift of ±2.0% FS/100°F.

The transmitter utilizes a unique, no liquid fill diaphragm design. It provides a 4-20 mA, 2-wire output signal powered by 9-30 VDC, with a maximum loop resistance of 800 Ω. The unit weighs 8 oz (227 g).

Configuration Options

The series offers multiple measurement ranges to accommodate specific process requirements. Available pressure spans include:

  • 681-02: 0 to 1 psi (Overpressure: 50 psi)
  • 681-12: 0 to 2 psi (Overpressure: 100 psi)
  • 681-42: 0 to 15 psi (Overpressure: 150 psi)
  • 681-52: 0 to 30 psi (Overpressure: 150 psi)
  • 681-62: 0 to 60 psi (Overpressure: 180 psi)

The process connection is a 2" or 1-1/2" sanitary clamp fitting male NPT. Wetted parts are constructed from 316L SS, compatible with liquids and gases. The electrical interface includes a 1/2" conduit fitting and strain relief with 15 ft (4.5 m) cable.

The transmitter features non-interactive zero and span adjustment capabilities of ±0.5 mA. Clamping effects on performance are documented as:

  • ±0.15% FS for ranges up to 30 psi
  • ±0.25% FS for ranges >30 psi

An optional NIST traceable calibration certificate (Order Code: NISTCAL-PT1) is available.

Key Product Differences

The Series 681 distinguishes itself through its sanitary clamp fitting design and no liquid fill diaphragm, which ensures negligible clamping effect on the output signal. The unit is factory calibrated and requires minimal field adjustment; however, if adjustments are made, zero and span screws with O-rings must be replaced to prevent moisture ingress.

Physical dimensions for the transmitter body include a diameter of 2.516 [64], height of 2.272 [58], and process connection height of 1.743 [44]. The design is completely watertight, utilizing sealed screws for adjustment access.

ko-KR
ko_KR
설정 저장