검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-RSF

회전식 유량계(공기/물/가스용) – 쉴드가 있는 직접 판독형

  • 반사 렌즈 배경과 1.5배 확대 렌즈가 시차와 눈의 피로를 줄여 시간을 절약하고 보다 정확한 판독을 가능하게 합니다
  • 튜브 파손을 방지하고 판독 해상도를 향상시키는 확대 렌즈 역할을 하는 두꺼운 폴리카보네이트 전면 보호막으로 긴 작동 수명 제공
  • 파손 시 추가 안전을 위한 안전 블로우아웃 후면 패널 포함으로 보호 기능 강화
Series-RSF
시작 1,612,655 원
회전식 유량계(공기/물/가스용) – 쉴드가 있는 직접 판독형 Series-RSF Series-RSF
loading all models
제품 개요
  • 정확도 ± 7%
  • 미디어 호환성 정제 공정 / 냉각수, HVAC / 실내 공기
  • 작동 온도, 최대 250 °F
  • 압력 유형 궤간
  • 프로세스 연결 사양 참고 두 개의 3/8˝ 여성 NPT
  • 프로세스 연결 크기 3/8인치
  • 프로세스 연결 유형 NPT 암나사
  • 증명압 최대 150 psi
  • 반복성 ± 0.25%
  • 스케일 길이 127 mm
  • 시리즈 ID Series-RSF
  • 턴다운비 10:1

Supported Applications

The Dwyer Series RSF Rotatable Scale Flowmeters are variable area flowmeters designed for the direct measurement of air, water, and other commonly used gases or liquids. These instruments feature a tapered borosilicate glass flowtube with a metallic float and a rotatable dual-scale shield that allows operators to read directly in SCFM/SLPM for air or GPM/LPM for water without correlation charts.

Operating Conditions & Performance

The series supports two primary material configurations, each with distinct operating limits. Brass/Stainless Steel models operate up to 250°F (121°C) and a maximum pressure of 150 psig (10.34 bar) @ 200°F (93°C). PTFE wetted parts are rated for temperatures up to 150°F (65°C) with a maximum pressure of 100 psig (6.7 bar).

Performance specifications include an accuracy of ±7% FS and repeatability of ±0.25% FS, based on the series data sheet values which take precedence over manual listings citing different accuracies. The flowmeters offer a turn-down ratio of 10:1 with direct reading scales marked at 127 mm.

Measurement Ranges

  • Air: 5 SCFM (140 LPM) to 30 SCFM (900 LPM)
  • Water: 1.2 GPM (4 LPM) to 5 GPM (20 LPM)

Configuration Options

The Series RSF is configurable across mounting styles, wetted materials, and valve options to suit specific installation needs.

Mounting & Housing Options

  • In-line: Designed for vertical installation in process lines with two 3/8" female NPT connections. Overall height is 11-1/8 [282.58] inches.
  • Panel Mount: Features a panel cutout requiring two 7/8" diameter holes spaced 9.469" (240.5 mm) apart. Includes a thick polycarbonate front shield for protection and a safety blow-out back panel.

Wetted Materials & Construction

  • Brass/SS Models: Flowtube is borosilicate glass; floats, float stops, and end fittings are Type 316 stainless steel or brass. O-rings are fluoroelastomer.
  • PTFE Models: Floats, float stops, end fittings, and O-rings utilize PTFE for chemical compatibility in specific applications.

Valve & Calibration Options

  • Needle Valve: A 6-turn needle valve is standard on models indicated with a "V" suffix (e.g., RSF011V).
  • NIST Traceable Calibration: Available as an option via NISTCAL-FL1 for air flowmeters and NISTCAL-FL2 for water flowmeters.

Safety & Installation Notes

The series includes a reflective lens background with 1.5X magnification to reduce parallax error. Safety warnings indicate that lines must be purged of dust prior to installation, and valves should be opened gradually after connection inspection. A leak test is recommended for hazardous fluids.

Key Product Differences

The Series RSF model numbering distinguishes between material construction, mounting type, valve inclusion, and flow range:

  • Material Code: Models beginning with "0" (e.g., RSF011) indicate brass wetted parts; models beginning with "1" (e.g., RSF111) indicate Type 316 stainless steel.
  • Mounting & Valve Suffixes: The third digit indicates the flow range. A trailing "V" denotes a model equipped with a needle valve, while its absence indicates no valve.
ko-KR
ko_KR
설정 저장