한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-MSX-Pro
프로 차압 트랜스미터 - 32개 범위 - NIST 옵션
- 플립 리드 하우징을 통해 장치 배선을 쉽게 접근 가능
- 제품의 혁신적인 설계로 PCB 아래 전자 장치를 보호하여 설치 중 장치의 우발적 손상 방지
- 변조 방지 커버로 보안 및 보호 강화
- 포함된 액체 밀폐형 케이블 글랜드 피팅으로 케이블 출구 부근의 액체 및 습기로부터 보호
- 포함된 공구 불필요 단자대 사용으로 빠르고 간편한 배선으로 설치 시간 단축
- UL94 V-0 및 플레넘 등급으로 시 및 건축 법규 기준을 충족해야 하는 다양한 응용 분야에 안전성 추가
제품 개요
- 정확도 세부 사항 ± 0.5% FSO
- 응용 분야 건축 및 유지 관리, HVAC
- 파열 압력 최대 6 psi
- 전기 연결 나사 단자 블록 포함 1/2인치 NPS 암나사 컨듀잇
- 전기 출력 4 ~ 20mA, 0 ~ 5Vdc, 0 ~ 10Vdc
- 외함 등급 IP66, NEMA 타입 4X, UL94 V-0, UL 2043 (플레넘)
- 장기 안정성 ± 1% FSO/년
- 루프 저항 현재 출력: 0~1250 Ω 최대, 전압 출력: 부하 저항 1 kΩ 최소.
- 제품 구조 옵션 해당 없음
- 접액부 재질 컨설트 팩토리
- 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, HVAC / 실내 공기, 비활성 가스/비반응성 가스
- 장착 사양 참고 장착 위치 영향 없음
- 와이어 수 2, 3
- 작동 온도, 최대 70 °C
- 최소 작동 온도 -20 °C
- 출력 세부 정보 필드 선택 가능
- 출력 신호 전류, 전압
- 전력 소비 최대 21 mA
- 압력 유형 차동
- 프로세스 연결 크기 1/8인치, 3/16인치, 1/4인치
- 프로세스 연결 유형 계단식 바브 피팅
- 응답 시간 3 s
- 응답 시간 사양 참고 즉시(기본값) 또는 3초(선택 가능)
- 시리즈 ID Series-MSX-Pro
- 스팬 조정 푸시 버튼
- 전원 유형 AC / DC
- 공급 전압 2선식: 10 ~ 36V, 3선식: 17 ~ 36V/21.6 ~ 33V.
- 무게 230 g
- 와이어 게이지 26 to 16 AWG
- 제로 설정 조절 범위 디지털 푸시 버튼
Supported Applications
The Dwyer Series MSX Pro Magnesense® Differential Pressure Transmitter is designed for critical building performance applications. It monitors uni- or bidirectional differential pressure and can calculate linear velocity or flow via square root extraction. The transmitter delivers outputs in specified units (in w.c., mm w.c., Pa) suitable for HVAC control systems.
Service media includes air and non-combustible, compatible gases. Wetted materials should be confirmed by consulting the factory.
Operating Conditions & Performance
The Series MSX Pro operates within an ambient temperature range of -4 to 158°F (-20 to 70°C). Accuracy is specified as ±0.5% FSO for all ranges, except the unidirectional .5 in w.c. range which is rated at ±1% FSO. Long-term stability is documented as ±1% FSO/year.
Pressure limits vary by selected range:
- Ranges 0 and 1: 3.6 psi max operation, 6 psi burst
- Ranges 2, 3, and 4: 6 psi max operation, 6 psi burst
Response time is instantaneous by default or selectable to 3 seconds via DIP switch configuration.
Configuration Options
The series supports a total of 32 pressure ranges across five range groups (0 through 4), configurable for unidirectional (0-based) or bidirectional (± maximum span) operation. Units are selectable as in w.c., mm w.c., Pa, kPa, FPM, m/s, CFM, or CMH.
Output signals and power configurations include:
- 2-wire output: 4-20 mA with 10-36 VDC supply (max loop resistance 0-1250 Ω)
- 3-wire output: Selectable 0-10 V or 0-5 V with 17-36 VDC or isolated 21.6-33 VAC supply
- Simultaneous outputs: Current and voltage available when using a DC power supply (not designed for AC operation)
The enclosure is rated NEMA 4X (IP66) with UL 2043 (Plenum) and UL94 V-0 compliance. Electrical entry uses a 1/2" NPS thread with an included cable gland, connecting to a 4-position removable terminal block for 16 to 26 AWG wire.
Process connections accept flexible tubing in sizes: 1/8", 3/16", 1/4", 5 mm, and 6 mm ID. Mounting options include wall mount brackets, duct mount brackets (universal model required), and DIN rail mounts. An optional 4-digit LCD display is available for local viewing.
Key Product Differences
The Series MSX Pro includes communicating models that support BACnet MS/TP or Modbus® RTU protocols over TIA/EIA-485 interfaces, distinct from the standard analog output variants. Communication parameters such as baud rate (9600 to 115200), parity, and stop bits are configurable via DIP switches.
Models differ by mounting style (Universal vs. Wall/DIN) and directionality (Unidirectional vs. Bidirectional). The optional LCD display is a separate accessory that plugs into the circuit board pins; it must be removed prior to wiring if installed. Factory calibration certificates are available as options, including NIST traceable versions.




