検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

DPG210-KIT

Pressure Calibration Kit

압력 교정 키트
在庫のあるモデル
  • 현장 교정을 용이하게 하는 압력 게이지 및 핸드 펌프가 포함된 풀 키트
  • 0.05% FS의 높은 정확도로 신뢰할 수 있는 기준 제공
  • 주변 온도 및 데이터의 최대값과 최소값 표시
  • 5자리 기본 디스플레이 및 보조 디스플레이
DPG210-KIT
販売元 4,024,941 원
在庫のあるモデル
압력 교정 키트 DPG210-KIT DPG210-KIT
loading all models
製品の概要
  • 追加機能 1 圧力校正キット
  • 追加機能 2 選択可能な単位、温度表示
  • バッテリー寿命 3600時
  • バッテリーのサイズと種類 アルカリAA
  • 破裂圧力 4倍フルスケール
  • 校正温度(最大) 40 °C
  • 校正温度(最小) 0 °C
  • ケース材質 304ステンレス鋼
  • 表示サイズ 2.1インチ x 2.1インチ (55 x 55 mm)
  • 表示タイプ 5桁LCD
  • エンクロージャーの定格 IP65
  • フォームファクター ハンドヘルド
  • 機能 圧力ポンプ&圧力リファレンス
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, プロセス水/冷却水, 油/潤滑油
  • 動作圧力(最小) -15 psi
  • 動作温度(最高) 50 °C
  • 圧力精度 ± 0.05 %
  • プロセス接続サイズ 1/4インチ
  • プロセス接続タイプ NPT オス
  • 耐圧力 0~100 psi:定格圧力の3倍、200~5000 psi:定格圧力の2倍
  • シリーズID DPG210-KIT
  • 安定性 ±0.2%
  • 最大保管温度 60 °C
  • 保管温度(最低) -20 °C
  • 温度精度 ± 0.5°C
  • 重量 10.25 lb

Supported Applications

The Omega DPG210-KIT Pressure Calibration Kits combine the high accuracy of the DPG210 digital pressure gauges with a pneumatic or hydraulic hand pump, providing an excellent solution for field calibration needs. The series is designed to generate and measure pressure using non-corrosive gas, water, or oil as compatible process media.

Operating Conditions & Performance

The DPG210-KIT delivers a pressure accuracy of ±0.05% FS with stability rated at ±0.2%FS/year. The gauge features a 5-digit LCD primary display and secondary display, with an adjustable sampling rate ranging from 1 to 10 times/second. Operating temperature is specified as -10 to 50°C (14 to 120°F), while the compensation temperature range is 0 to 40°C (32 to 104°F). Storage temperatures are supported between -20 to 60°C (-4 to 140°F).

Pressure limits vary by rated pressure: Over Pressure Limits are defined as 3X Rated Pressure from 0 to 100 psi and 2X Rated Pressure from 200 to 5000 psi. Burst Pressure is specified as 4X Rated Pressure from 0 to 100 psi and 3X Rated Pressure from 200 to 5000 psi. The unit carries an IP65 environmental rating.

Configuration Options

The series supports multiple pressure ranges including 0 to 100 psi, 0 to 500 psi, 0 to 1000 psi, 0 to 5000 psi, and 0 to 10000 psi. Each kit includes the DPG210 digital gauge in a selected pressure range, a hand pump (pneumatic or hydraulic), a rugged carrying case, and a selection of fittings and hose.

Configuration options include:

  • Pump Type Selection: Kits with ranges of 500 psi or below include a pneumatic hand pump capable of generating 0 to 500 psi pressure. For ranges of 1,000 psi or higher, a 0 to 10,000 psi hydraulic hand pump is included.
  • Process Connection: Standard connection is ¼" NPT; other materials are available by consulting Omega Sales.
  • Housing and Wetted Materials: The pressure gauge case material is 304SS, with wetted parts also constructed of 304SS.
  • Power Supply: Operates on three AA batteries or USB-power (USB2.0, 5V Power at 5V 0.15A). Battery life is up to 3,600 hours.

The gauge includes a backlight function and supports temperature display in °C or °F with an accuracy of ±0.5°C. Additional functions such as Address Bit (1~255 available) and Baud Rate selection (4800/9600/19200 available) are offered but must be specified before purchase.

Key Product Differences

The DPG210-KIT series is differentiated primarily by pressure range, pump type, and included accessories. The model number guide follows the format: DPG210-KIT - - - - . For example, a kit may be ordered as DPG210-KIT-500-PM-FH-CASE.

Variants are available in ranges denoted by part numbers such as 005G (likely corresponding to specific psi or kgf/cm² scales), 1.0KG, 10KG, and others up to 10,000 psi equivalents. The pneumatic pump is restricted to lower pressure applications (up to 500 psi generation), while the hydraulic pump supports higher ranges starting at 1,000 psi rated gauges.

Note: The oil cup in the hand pumps is made of plexiglass and must not contact volatile media such as alcohol, dimethyl pump, or ether to avoid damage. Installation requires care with thread engagement; users should clear zero after installation if stress affects the gauge reading.

アクセサリー

圧力/真空用ゲージガード、ポリプロピレン製、無機物適合
発送元 ¥21,309
0 facet.availability.sku_availability
圧力/真空校正用空気式手動ポンプ - 漏れ防止設計
発送元 ¥48,967
0 facet.availability.sku_availability
圧力サージから保護するための圧力スナバー
発送元 ¥3,395
0 facet.availability.sku_availability
ja-JP
ko_KR
設定を保存する