한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
HHT30R
휴대용 디지털 스트로보스코프
- NIST校正証明書付属
- 内蔵充電式バッテリーまたはAC電源モデル
- 電子スイッチングによる連続冷却運転
- タコメーターモード
제품 개요
- 精度 ± 0.01 %
- 表示サイズ 12.7 mm (0.5 インチ)
- 表示タイプ 6桁LCD
- ハンドル長 108 mm
- 高さ 90.4 mm
- ハウジング径 122 mm
- 長さ 229 mm
- 測定注記 フラッシュエネルギー:180 mJ;フラッシュ持続時間:20~50 µs;フラッシュチューブ寿命:1億回のフラッシュ;トリガーからフラッシュまでの遅延:5 µs;外部トリガー入力:1/8インチフォンプラグ、TTL互換;同期出力:1/8インチフォンプラグ、TTL互換
- 測定タイプ フラッシュ
- 測定範囲(最小) 30 ~ 14,000 fpm、0.5 ~ 233.33 fps
- 動作温度(最高) 40 °C
- 動作温度(最低) 5 °C
- 相対湿度 0.8
- 相対湿度の注意 最大相対湿度80%(温度31°C(88°F)まで)、40°C(104°F)で50%RHに線形低下
- 抵抗値の分解能 0.1 fpm
- シリーズID HHT30R
- タコメーターの精度 ±0.01%のRDGまたは±0.2rpm
- タコメーターレンジ 5Cから200,000 rpm
- タコメーター分解能 0.1 rpm、最大99,999.9 rpm;1回転、10万から20万回転
- 三脚マウント 1/4-20 UNC
- 幅 93 mm
Supported Applications
The Omega HHT30 series consists of portable digital stroboscopes designed for measuring rotational speed (RPM) and analyzing motion through stop-motion diagnostic inspection. The instruments support multiple operating modes including Internal Strobe, TACH Frequency Generator, External Input, and Tachometer Mode to facilitate visual inspection tasks such as checking misalignment or bent odd-numbered fan blades and propellers.
Operating Conditions & Performance
The series provides reliable speed measurements with crystal-controlled circuitry that eliminates drift. Flash range capabilities span 30 to 14,000 fpm (flashes per minute) or 0.5 to 233.33 fps (frames per second). In Tachometer mode, the unit measures speeds from 5 to 200,000 rpm directly without flashing the strobe.
Performance specifications include a flash accuracy of ±0.01% rdg or ±0.5 fpm and tach accuracy of ±0.01% rdg or ±0.2 rpm. Resolution is specified as 0.1 fpm for flash settings, while tach resolution offers 0.1 rpm up to 99,999.9 rpm and 1 rpm from 100,000 to 200,000 rpm.
Operating conditions are defined as an ambient temperature range of 5 to 40°C (41 to 104°F). Operating humidity is limited to a maximum RH of 80% for temperatures up to 31°C (88°F), decreasing linearly to 50% RH at 40°C (104°F).
Configuration Options
The HHT30 series is available in two primary power configurations: the AC mains-powered HHT31 models and the battery-operated HHT32 models. The HHT31 operates on 115 or 230 Vac, 50 to 400 Hz with an average power consumption of 15 W. The HHT32 utilizes internal rechargeable batteries (6 Vdc @ 2.5 A max) and includes a microprocessor-controlled charging circuit; battery life exceeds 60 minutes at 6000 fpm.
Key configurable features and options include:
- Housing & Mounting: Units feature a body dimension of 90.4 H x 93.0 W x 229 mm L (3.56 x 3.66 x 9") with a handle length of 108 mm (4.25"). A tripod mount is provided as ¼-20 UNC.
- Display & Controls: All models include a 6-digit backlit alphanumeric LCD display measuring 12.7 mm (0.5") with rotary encoder frequency setting, 'Divide by 2'/'Multiply by 2', and phase adjustment buttons ('Phase +' / 'Phase -').
- I/O Connectivity: External trigger input and synchronization output are available via a ¼" phone plug, TTL compatible. Trigger to flash delay is typically 5 μs.
- Accessories & Kits: Options include rugged carrying cases, spare lamps, 3-hour rechargers (for HHT32), remote sensors for tachometer mode (HHT20-ROS), and a splashproof protective cover specifically for HHT32 models.
Key Product Differences
The series distinguishes between AC-powered and battery-operated units, with specific model codes reflecting power supply and accessory inclusion. The HHT31R is the base 115 Vac powered stroboscope, while the HHT31R-230 supports 230 Vac input. 'KIT' variants (e.g., HHT31R-KIT) include a rugged carrying case and spare lamp.
The HHT32R is the battery-powered version supplied with an internal rechargeable battery and AC charger; the HHT32R-KIT adds the 3-hour recharger, case, and spare lamp. The splashproof protective cover (HHT32-SPC) is available exclusively for HHT32 models.