검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

MFT-FEEDTHROUGH

다중 프로브 피드스루 페룰 및 캡

재고가 있는 모델
  • 압력 또는 진공 응용
  • 다중 열전대 밀봉
  • 다중 보호관 밀봉
  • NPT 장착 나사산
MFT-FEEDTHROUGH
시작 73,576 원
재고가 있는 모델
다중 프로브 피드스루 페룰 및 캡 MFT-FEEDTHROUGH MFT-FEEDTHROUGH
loading all models
제품 개요
  • 시리즈 ID MFT-FEEDTHROUGH

Supported Applications

The Omega MFT series consists of multiconductor feedthroughs designed for applications requiring several thermocouple sensors to pass through a wall or bulkhead at one opening. These compression-type fittings are engineered for high-pressure or vacuum applications when used with stainless steel ferrules, providing sealing capabilities in demanding environments.

Operating Conditions & Performance

The MFT series accommodates probe diameters ranging from 1 to 6 mm (0.040 to ¼ inch). The fittings support configurations with up to 16 probes within a single fitting, depending on the selected sheath diameter and model number.

Construction Materials

  • Housing: Manufactured from 416 stainless steel (416 SS).
  • Ferrules: Standard ferrules are supplied in 300 series stainless steel; PTFE ferrules are available for re-use applications.

Configuration Options

The MFT feedthroughs offer extensive configurability across mounting threads, probe counts, and material options to suit specific installation requirements.

Mounting Threads & Standards

  • NPT: Available in ¼", ½", and ¾" NPT sizes based on the number of probes and sheath diameter.
  • ISO T/BPST: Metric versions are available by adding "-BSPT" to the model number, with no additional charge. Thread options include ¼", ½", and ¾" ISO T/ BPST mounting threads corresponding to metric probe diameters (1.0 mm through 6.0 mm).

Probe Capacity & Dimensions

The series supports varying numbers of probes per fitting, determined by the sheath diameter code and model selection:

  • Sheath Diameter (inch): 0.040", 1/16", 1/8", 3/16", and ¼".
  • Probe Count: Configurations range from 3 to 16 probes per fitting, with specific model numbers such as MFT-040-3 (3 probes) through MFT-040-16 (16 probes).

Ferrule Options

Replacement ferrules are available in both standard and metric sizes:

  • Material Types: 316 SS or PTFE.
  • Sizing: Ferrules match probe diameters from 0.040" to ¼" (standard) and 1.0 mm to 6.0 mm (metric).
  • Note: If PTFE ferrules are required, add the suffix "-PTFE" to the model number; one ferrule is needed for each conductor.

Accessories

  • Male Threaded Caps: Optional caps replace standard cap locking nuts. Available in ¼ NPT (FTN-1), ½ NPT (FTN-1-12), and ¾ NPT (FTN-1-14).
  • Teflon Tape: PTFE tape is available as an accessory.

Key Product Differences

The MFT series distinguishes between standard inch-based models and metric variants. Standard model numbers follow the format MFT--, such as MFT-116-6 for a 1/16" sheath with 6 probes.

Key variations include:

  • Housing Material: All units feature a 416 SS body and cap.
  • Ferrule Composition: Standard supply includes stainless steel ferrules; PTFE options are available for specific re-use needs but require separate ordering or suffix modification.
  • Thread Standards: Inch models utilize NPT threads, while metric models use ISO T/BPST threads. The physical dimensions (Length L1 and L2) vary by thread size and probe count as detailed in the specification tables.
ko-KR
ko_KR
설정 저장