日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
AM-2250TX-Transmitter
多変量pH、ORP、導電率および流量ループ給電トランスミッター
- pH、ORP、導電率および流量パラメータ対応
- 視認性の高い大型LCDディスプレイ
- 柔軟で簡単な校正、酸および塩基用の多点導電率校正を含む
- レンジスケーリングおよびPID制御付き4-20mAプロセス出力
製品の概要
- 追加機能 1 pH, ORP, Conductivity, Flow. Wall or Panel Mounting
- 承認 ETL (US and Canada) and CE pending
- 校正に関する注記 pH Calibration Modes: Automatic or Manual 2 or 3 points ORP Calibration Modes: Manual 1 point Conductivity Calibration Modes: Up to 16 points Flow Calibration Modes: K-factor input
- 導電率測定 0.055 to 500,000 µS/cm
- 電気出力 4 to 20 mA
- エンクロージャーの定格 NEMA Type 4X
- 流量表示に関する注記 0 to 999 in any units
- 表紙の高さ 5.5 in
- 表紙幅 5.5 in
- 高さ 5.4 in
- 入力範囲注記 pHセンサー入力:-600~+600 mV;ORPセンサー入力:-999~+999 mV;導電率センサー入力:0~9999 Ω;流量センサー入力:0~2000 Hz
- 長さ 5 in
- 荷重抵抗 800 Ω
- 測定タイプ 導電率、pH、ORP、流量
- 取付 壁取付、キット付パネル取付。DINレールおよびパイプ取付はオプションキット対応
- 動作温度(最高) 70 °C
- 動作温度(最低) -20 °C
- ORP測定範囲 -1000から+1000 mV
- 出力詳細 1つの4-20 mA出力 PID(プロセス)対応スケーラブル4-20mA 光アイソレーション付き。
- pH測定範囲 0から14のpH
- 消費電力 20 mA @ 24 Vdc
- 相対湿度 相対湿度0~90%、結露なし
- センサーノート PHセンサー 6線式差動またはコンビネーション ORPセンサー 6線式差動またはコンビネーション 導電率センサー 4線式接触型:セル定数0.01~100の任意 流量センサー パルス出力:パドルホイール、 PH温度素子 Magmete 100、1000 Ω、RTD 300、3000 Ω NTC ORP温度素子 100、1000 Ω、RTD 300、3000 Ω NTC 導電率温度素子 100、1000 Ω、RTD 300、3000 Ω NTC
- シリーズID AM-2250TX-Transmitter
- 温度補償 pH:自動;ORP:温度表示;導電率:自動または手動 -20~120 °C;流量:流量積算計表示
- 温度範囲 pH範囲:-20~120 °C;ORP範囲:-20~120 °C;導電率範囲:-20~120 °C
- 重量 2 lb
- 幅 5.4 in
Supported Applications
The Omega AM-2250TX is a loop-powered, multi-parameter transmitter designed for industrial and municipal water quality monitoring. It measures pH, ORP (Oxidation Reduction Potential), Conductivity, and Flow parameters using compatible AquaMetrix sensors.
- pH measurement with 6-wire differential or combination sensor inputs
- ORP measurement supporting -999 to +999 mV ranges
- Contacting conductivity measurements from 0.055 to 500,000 µS/cm (depending on cell constant)
- Pulse output flow monitoring via paddle-wheel or magnetic flow meters
Operating Conditions & Performance
The AM-2250TX operates within an ambient temperature range of -20 to 70 °C and supports process temperatures from -20 to 120 °C for pH, ORP, and conductivity applications. The unit is rated for humidity levels between 0 to 90% Relative Humidity, non-condensing.
- Enclosure Rating: NEMA 4X polycarbonate
- Sensor Input Ranges: - pH: -600 to +600 mV - ORP: -999 to +999 mV - Conductivity: 0 to 9999 Ω - Flow Pulse: 0 to 2000 Hz
- Power Supply: 16-32 VDC (24VDC nominal), loop-powered design consuming max 20 mA @ 24 VDC
Configuration Options
The AM-2250TX is configured as a transmitter without relay outputs or backlit LCD displays, distinguishing it from AC-powered controller variants in the series. It provides one scalable analog output and supports various sensor configurations.
Sensor & Calibration Options
- pH Sensors: 6-wire differential or combination types with automatic/manual calibration (2 or 3 points)
- ORP Sensors: Single-point manual calibration
- Conductivity Cells: 4-wire contacting sensors supporting cell constants from 0.01 to 100; up to 16-point wet or dry calibration available
- Flow Inputs: K-factor input for pulse output devices (paddle-wheel, magmeter)
Outputs & Mounting
- Analog Output: One optically isolated, fully scalable 4-20 mA signal with optional PID control; max load resistance of 800 Ω
- Mounting Options: Wall mount or panel mount (kit provided); DIN-rail and pipe mounting kits available as options
Certifications & Physical Specs
- Approvals: ETL (US and Canada), CE pending, RoHS Compliant
- Dimensions: Front cover 5.5"x5.5" (14 cm x 14 cm); Depth 5" (13 cm)
- Panel Cut-out: 5.4" x 5.4" (138 x 138 mm) full DIN
Key Product Differences
The AM-2250TX is the loop-powered transmitter version of the AquaMetrix series, distinct from the AC-powered AM-2250 and AM-2251 controllers. Key differences include:
- No relay outputs or power-relay circuit board
- Non-backlit LCD display due to power constraints
- Single 4-20 mA output versus dual outputs on AC-powered models