검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

AM-2250-Controller

다중 변수 컨트롤러 pH, ORP, 접촉식 전도도, 유량

재고가 있는 모델
  • pH, ORP, 전도도 및 유량 파라미터 지원.
  • 높은 가시성의 백라이트 LCD 디스플레이.
  • 유연하고 쉬운 교정, 산 및 염기에 대한 다점 전도도 교정 포함.
  • 상승 또는 하강 공정을 위한 3개의 제어 릴레이.
AM-2250-Controller
시작 2,367,136 원
재고가 있는 모델
다중 변수 컨트롤러 pH, ORP, 접촉식 전도도, 유량 AM-2250-Controller AM-2250-Controller
loading all models
제품 개요
  • 추가 기능 1 PID 제어, 센서 별도 판매
  • 보정 사양 참고 pH 교정 모드: 자동 또는 수동 2점 또는 3점; 용존 산소 교정 모드: 100% 포화 제로 오프셋; ORP 교정 모드: 수동 1점; 전도도 교정 모드: 최대 16점 제로 오프셋
  • 규정 준수 노트 ETL(미국 및 캐나다) 및 CE 심사 중
  • 전도도 측정 0.055 ~ 500,000 μS/cm
  • 컷아웃 치수 5.4 x 5.4 인치
  • 디스플레이 유형 LCD
  • 외함 등급 NEMA 타입 4X
  • 유량 표시 사양 참고 0에서 999까지 모든 단위
  • 높이 5.5 in
  • 입력 범위 사양 참고 pH 센서 입력: -600에서 +600 mV; ORP 센서 입력: -999에서 +999 mV; 전도도 센서 입력: 0에서 9999 Ω; 유량 센서 입력: 0에서 2000 Hz
  • 길이 5 in
  • 장착 방향 패널 마운트, 벽걸이 마운트
  • 릴레이 수 3
  • 작동 습도 0 ~ 90% RH
  • 작동 온도, 최대 120 °C
  • 최소 작동 온도 -20 °C
  • ORP 측정 범위 -1000 ~ +1000 mV
  • 출력 세부 정보 두 개의 4-20 mA 출력, PID(프로세스)가 가능한 스케일러블 4-20mA, 스케일러블 4-20mA(프로세스 또는 온도), 광학 절연. 최대 부하 - 800 Ω
  • pH 측정 범위 0 ~ 14 pH
  • 전력 소비 0.2 A @ 115 교류 전압 (AC) 또는 15W
  • 공정 온도, 최대 -20 °C
  • 최소 공정 온도 70 °C
  • 릴레이 사양 참고 3건식 접점 릴레이(스너버 회로 포함), 10A @ 120/240 VAC 또는 8A @ 30 VDC (저항 부하), 5A @ 120/240 VAC 또는 4A @ 30 VDC (유도 부하) 릴레이 모드: 상승/하강/범위 내. 옵션: 릴레이 지연, 사이클, 과급 타이머, 오버라이드, 온도 또는 유량 토탈라이저에 의해 하나의 릴레이를 트리거할 수 있음.
  • 감지 요소 RTD Ω 100/1000, NTC Ω 300/3K 또는 전혀 없거나
  • 센싱 요소 사양 참고 PH, ORP, 전도도: 100, 1000 Ω, RTD 300, 3K Ω NTC 또는 없음
  • 센서 유형 사양 참고 pH 센서: 6선식 차동 또는 조합형; ORP 센서: 6선식 차동 또는 조합형; 전도도 센서: 4선식 접촉식 : 셀 상수 0.01에서 100 사이 가능; 유량 센서: 펄스 출력: 패들휠, 마그메트
  • 시리즈 ID AM-2250-Controller
  • 온도 보상 자동: pH ;자동 또는 수동: 전도도 ;온도 표시: ORP ;유량 총계 표시: 유량
  • 온도 측정 사양 참고 pH, ORP, 전도도 : -20 ~ 120 °C, 유량 : 유량 총계계 0~999 (단위 임의)
  • 무게 2 lb
  • 폭 5.5 in

Supported Applications

The Omega AM-2250 series comprises multi-parameter controllers and transmitters designed for pH, ORP (Oxidation Reduction Potential), contacting conductivity, inductive conductivity, dissolved oxygen, and flow measurements. The AquaMetrix by Water Analytics line supports applications requiring flexible calibration modes, including up to 16-point wet or dry calibration for conductivity acids and bases, as well as TDS and % concentration calculations.

Operating Conditions & Performance

The series operates within an ambient temperature range of -20 to 70 °C in environments with 0 to 90% Relative Humidity (non-condensing). Measurement capabilities include a pH process range of 0 – 14 pH and ORP from -999 to 999 mV. Conductivity measurement ranges span 0.055 to 500,000 µS/cm depending on the cell constant used (available constants: 0.01 to 100). Flow inputs accept pulse outputs up to 2000 Hz with a totalizer range of 0 to 999 in any available units.

Electrical performance includes two fully scalable and optically isolated 4-20 mA analog outputs (Channel 1 supports optional PID; Channel 2 configurable for Process or Temperature) with a maximum load resistance of 800 Ω. The unit is housed in a NEMA 4X polycarbonate enclosure, rated ETL (US and Canada), cETL, RoHS Compliant, and CE pending.

Key Performance Specifications

  • pH Sensor Input: -600 to +600 mV with 1, 2, or 3-point automatic/manual calibration modes.
  • ORP Sensor Input: -999 to +999 mV with single-point manual calibration.
  • Conductivity Calibration: Up to 16 points (wet or dry).
  • Flow Calibration: K-factor input for paddle-wheel and magnetic flow sensors.

Configuration Options

The AM-2250 series offers distinct configurations based on power requirements, display features, and sensor compatibility. The standard AC-powered models (AM-2250 and AM-2251) feature a large backlit LCD, three independent relays, and two 4-20 mA outputs. A loop-powered transmitter version (AM-2250TX) is available without the power-relay board or backlit display due to power constraints.

Model-Specific Configurations

  • AM-2250: Supports 6-series and 500-series pH/ORP sensors, contacting conductivity, flow pulse inputs, two 4-20 mA outputs (one with PID), and three independent relays.
  • AM-2251: Designed for inductive conductivity and dissolved oxygen measurements alongside pH/ORP; includes two 4-20 mA outputs and three relays but does not support contacting conductivity or flow pulse inputs per the summary table.
  • AM-2250TX: Loop-powered transmitter version supporting pH, ORP (6-series/500-series), contacting conductivity, and flow; includes two 4-20 mA outputs but lacks relays and a backlit LCD.

Relay Control Options

The three independent dry contact relays support resistive loads up to 10A @ 120/240 VAC or 8A @ 30 VDC, and inductive loads up to 5A @ 120/240 VAC or 4A @ 30 VDC. Relay modes include Rising/Falling/Range mode, Cycle On/Off, Relay Delay, Overfeed Timer, and Override functions.

Key Product Differences

The primary distinction within the series lies in sensor compatibility and output architecture. The AM-2250 is configured for contacting conductivity and flow pulse inputs (Paddle-wheel/Magmeter), whereas the AM-2251 supports inductive conductivity and dissolved oxygen sensors but excludes contacting conductivity and flow options.

Power supply requirements differ between models: AC-powered units operate on 120/240 VAC, 60 or 50 Hz (Max Power Input: 0.2 A @ 115 VAC or 15 W), while the AM-2250TX is loop-powered and omits the internal power-relay circuit board. All models share identical physical dimensions with a front cover of 5.5"x5.5" (14 cm x 14 cm) and depth of 5" (13 cm), weighing approximately 2 lbs.

Mounting options include wall mount, panel mount (kit provided; cut-out: 5.4" x 5.4" / full DIN), or optional pipe mount kits.

ko-KR
ko_KR
설정 저장