검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

LD400

소형 LVDT 선형 위치 센서

재고가 있는 모델
  • 고출력 소형 LVDT 변환기
  • 소형 액추에이터에 이상적
  • 정밀한 동작을 위한 델린 베어링
  • 무한 해상도
LD400
시작 1,123,823 원
재고가 있는 모델
소형 LVDT 선형 위치 센서 LD400 LD400
loading all models
제품 개요
  • 정확도 세부 사항 20°C(68°F)에서 보정 부하 20 kΩ에 대한 변환기 출력 임피던스 2.4 kΩ 제공; 이러한 매개변수의 변화는 성능에 영향을 미칩니다
  • 추가 기능 1 미니어처 DC 변위
  • 대역폭 50 Hz (-3 dB)
  • 케이블 길이 2 m
  • 케이블 종류 절연 차폐
  • 최대 보상 온도 80 °C
  • 최소 보상 온도 -20 °C
  • 핵심 자료 Ni/Fe—라디오 메탈 50
  • 전기 연결 피그테일 리드
  • 전기 출력 DC
  • 외함 등급 IP67
  • 하우징 재질 400 스테인리스 스틸
  • 입력 전류 10 mA
  • 작동 온도, 최대 80 °C
  • 최소 작동 온도 -20 °C
  • 출력 리플 <1%
  • 시리즈 ID LD400
  • 공급 전압 10 ~ 24 Vdc
  • 무게 26 g

Supported Applications

The Omega LD400 series consists of miniature DC output linear variable displacement transducers (LVDTs) designed to measure displacements up to ±5.0 mm (±0.20"). These self-contained units accept a regulated DC input and provide a DC voltage output relative to armature position, utilizing hybrid ICs including an oscillator, demodulator, and filter. The series is engineered for applications in civil, mechanical, chemical, and production engineering where high linearity and low mass of moving parts are required.

Operating Conditions & Performance

The LD400 transducers operate within a compensated temperature range of -20 to 80°C (-4 to 176°F). The series delivers an accuracy (linearity) of 0.3% FS and features infinite resolution for detecting the smallest movement identifiable by associated instrumentation. Electrical performance includes an excitation requirement of 10 to 24 Vdc regulated, with a frequency response of 50 Hz at -3 dB and ripple less than 1% FS.

Response time varies by model stroke: LD400-1 and LD400-2.5 models exhibit a 5 ms response time, while the LD400-5 model provides a 3 ms response time. Thermal effects on zero are specified as less than 0.02% FS/°C for the LD400-1 and less than 0.01% FC/°C for the LD400-2.5 and LD400-5; sensitivity thermal drift is less than 0.025% FC/°C.

Configuration Options

The series offers three distinct stroke configurations, each with specific dimensions and weights:

  • LD400-1: ±1.0 mm (±0.04") stroke; 75 mV/V/mm sensitivity.
  • LD400-2.5: ±2.5 mm (±0.10") stroke; 75 mV/V/mm sensitivity.
  • LD400-5: ±5.0 mm (±0.20") stroke; 54 mV/V/mm sensitivity.

Mechanical construction features a free-guided armature with acetal bearings to provide near-frictionless motion. The case material is 400 Series stainless steel, and the core utilizes Ni/Fe—Radio Metal 50. Each unit includes an M2 threaded core for connection.

Key Product Differences

The primary distinction among models lies in stroke length, which influences sensitivity values and physical dimensions. The LD400-1 and LD400-2.5 share identical body weights of 26 g (1.02 oz) and core weights of 1.0 g (0.04 oz), with overall dimension A at 21.5 mm (0.85 in). The LD400-5 model has a slightly shorter diameter (A: 20.5 mm / 0.81 in) but increased length and weight, totaling 30 g (1.18 oz) for the body.

Electrical connections are provided via a 2.9 m (9') shielded, color-coded cable with specific pinouts: Red (+ Excitation), Blue (- Excitation), White (+ Signal*), Green (- Signal), and Yellow (No connection). The white signal wire is in phase for positive inward displacement.

ko-KR
ko_KR
설정 저장