検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Model-MSCS

ミニ電流スイッチ、0.15 A固定設定点、分割コア、HVACおよびその他

Mini Current Switch, 0.15 A Fixed Set Point, Split Core, HVAC & More
  • Integral mounting flange for quick installation
  • Compact size fits in any space
Model-MSCS
販売元
Mini Current Switch, 0.15 A Fixed Set Point, Split Core, HVAC & More Model-MSCS Model-MSCS
loading all models
製品の概要
  • Core Type Split
  • Electrical Output N.O.
  • Enclosure Ratings UL94 V-0
  • Frequency 50/60 Hz
  • Isolation 300 Vac (RMS)
  • Materials ABS
  • Measurement Type Current
  • Operating Temperature, Max 140 °F
  • Operating Temperature, Min 5 °F
  • Relative Humidity 0 to 95%, Non-Condensing
  • Series ID Model-MSCS

Supported Applications

The Dwyer Model MSCS Miniature Current Switch is a low-cost solution for monitoring the on and off status of light to medium current loads in compact spaces. This unit features a split core design with a fixed set point of 0.15 amps, designed to detect changes in operating current to prevent motor belt loss, slippage, or mechanical failure.

Operating Conditions & Performance

The Model MSCS operates within an ambient temperature range of 5 to 140°F (-15 to 60°C) and a humidity limit of 0 to 95%, non-condensing. The device is self-powered with no external power requirements, operating at frequencies of 50/60 Hz. It provides an isolation voltage rating of 300 VAC RMS.

Performance specifications include:

  • Amperage Range: 0.15 to 60 A
  • Output Signal: NO (Normally Open)
  • Enclosure Rating: UL 94 V-0 flammability rated, ABS plastic housing
  • Agency Approvals: CE, cULus

Configuration Options

The series is currently represented by the MSCS-220015 model. The unit utilizes a split core design to accommodate conductors without breaking the circuit. Electrical connections are made via a Digital Input (DI) terminal with a maximum terminal voltage of 30 VAC.

Physical dimensions for the ABS plastic housing include:

  • Height: 1-9/16 in [39.37]
  • Width: 1-3/16 in [30.16] (front view) / 1-23/32 in [43.69] (side view)
  • Depth: 27/32 in [21.08]

The unit includes mounting holes with a diameter of 3/16 in [04.57] and spacing of 2XØ 3/16 in [04.57]. For applications requiring lower current detection, the cable may be wrapped multiple times through the sensing hole; however, users must derate the maximum current capacity using the formula: New Maximum Current = MSCS-220015 Current Rating ÷ Number of turns.

Key Product Differences

The Model-MSCS series is defined by a single fixed set point configuration. The available model, MSCS-220015, provides the specified 0.15 A threshold and NO output signal as documented in the primary data sheet.

ja-JP
ko_KR
設定を保存する