한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
LCMWD
미터법, 고정밀, 볼트 압축 측정을 위한 하중 와셔
재고가 있는 모델
- 5점 NIST 추적 가능 교정 제공
- 최대 200 kN 범위
- 컴팩트 디자인
- 구면 와셔 포함
제품 개요
- 케이블 길이 5 ft
- 보정 옵션 5 포인트 NIST
- 전기 연결 케이블
- 힘 유형 압축
- 풀 스케일 편차 0.001 in
- 로드셀 타입 로드 와셔
- 재료 스테인리스 스틸
- 작동 온도, 최대 127 °C
- 최소 작동 온도 -40 °C
- 과부하, 최대 200% FS
- 공정 온도, 최대 71 °C
- 최소 공정 온도 16 °C
- 안전 과부하 120% FS
- 시리즈 ID LCMWD
- 공급 전력 참고 10 Vdc, 최대 15 Vdc
- 공급 전압 10 Vdc
- 열적 스팬 효과 ± 0.018% FSO/°C
- 열 영점 효과 ± 0.018% FSO/°C
- 배선/커넥터 테이블 빨강: (+) 여기; 검정: (-) 여기; 녹색: (+) 출력; 흰색: (-) 출력
- 영점/밸런스 오차 ± 4%
Supported Applications
The Omega LCMWD series consists of metric, high accuracy load washers designed to measure bolt compressional forces. These units function as compression load cells intended for use with bolts in structural and mechanical assemblies.
- Bolt tension monitoring via compressive force measurement
- Compression testing applications requiring through-hole installation
Operating Conditions & Performance
The LCMWD series operates within an ambient temperature range of 16 to 71°C (60 to 160°F) and a process temperature range of -40 to 127°C (-40 to 260°F). Accuracy is specified as ±0.5% BFSL for capacities ≤10K lb/50 kN and ±0.75% BFSL for >10K lb/50 kN, with performance defined by combined linearity, hysteresis, and repeatability.
- Excitation voltage: 10 Vdc (15V maximum)
- Output signal: <500 lb/2kN provides 1 mV/V nominal; ≥500 lb/2kN provides 2 mV/V nominal
- Load resistance: <50K lb/200 kN is 350 Ω min; ≥50K lb/200 kN is 700 Ω
Configuration Options
The series supports a measurement range from 0-1000 to 0-200 kN (equivalent to 0-200 lb to 0-200,000 lb). Each unit is constructed of stainless steel and includes spherical washers and load buttons. The standard electrical connection features a 1.5 m (5') insulated shielded cable with the following wiring code: RED (+EXC), BLACK (-EXC), GREEN (+OUT), WHITE (-OUT).
Available Capacities
Metric models are available in capacities of 1000 N, 2000 N, 5000 N, 10,000 N, 20,000 N, 50,000 N, 100,000 N, and 200,000 N. Dimensional envelopes vary by capacity; for example, the ≤10K lb (50 kN) size has an ID of 10.2 mm (0.40 inch), OD of 25 mm (1.0 inch), and height of 9.0 mm (0.35 inch).
Signal Conditioning & Accessories
- iDRX-ST: Digital signal conditioner for strain gages and bridge transducers with RS485 output, offering 13-Bit Resolution.
- iDRN-ST: Signal conditioner for strain gages and bridge transducers with analog output.
- Factory setup and scaling option (-FS).
Key Product Differences
The LCMWD series represents the metric configuration of the load washer family, distinct from standard (inch) models. Metric units come complete with 5-point NIST-traceable calibration and 59 kΩ shunt data, whereas standard models include 4-point NIST-traceable calibration. Model numbers follow the format LCMWD-<CAPACITY>KN (e.g., LCMWD-100KN). Compatible meters for these units include DPiS, DP41-S, and DP25B-S.
PDF 및 매뉴얼