한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
PXM309
미터법, 범용, 스테인리스 스틸 압력 트랜스듀서
재고가 있는 모델
- 5점 추적 가능 교정 증명서
- 고정밀, ± 0.25% FS BSL (선형성, 히스테리시스 및 반복성)
- 대부분 범위에서 1% 총 오차 범위
- 역극성 및 과전압 보호
제품 개요
- 정확도 ± 0.25%
- 정확도 등급 0.1% 대 0.25%
- 정확도 세부 사항 정적 정확도 350 mB ~ 700 bar: 25 °C에서 ± 0.25% FS BSL (선형성, 히스테리시스 및 반복성 포함)
- 대역폭 DC ~ 1 kHz
- 외함 등급 IP65
- 절연 저항 1 MΩ
- 작동 온도, 최대 85 °C
- 최소 작동 온도 -40 °C
- 압력 사이클 1,000만
- 프로세스 연결 크기 1/4인치
- 프로세스 연결 유형 BSPP 수나사
- 응답 시간 1 ms
- 시리즈 ID PXM309
- 충격 50 g, 11 ms 하프 사인파
- 안정성 ± 0.25 %
- 안정성 사양 참고 장기 안정성(1년): ± 0.25% FS
- 공급 전력 참고 15~30 Vdc, 10 mA에서
- 공급 전압 15 ~ 30 Vdc
- 진동 ± 20 g
- 무게 150 g
Supported Applications
The Omega PXM309 series comprises metric, general-purpose pressure transducers designed for multimedia compatibility. These stainless steel units utilize high-performance silicon technology to measure Absolute Pressure, Gage (Relative) Pressure, and Vacuum and Compound Gage Pressure.
- Absolute Pressure: 350 mbar to 20 bar
- Gage (Relative) Pressure: 70 mbar to 700 bar
- Vacuum and Compound Gage Pressure: Ranges including -1 to +1 bar, -1 to +2 bar, up to -1 to +10 bar
Operating Conditions & Performance
The series operates within an ambient and process temperature range of -40 to 85°C (-40 to 185°F). Static accuracy is specified as ±0.25% FS BSL at 25°C, which includes linearity, hysteresis, and repeatability. Long-term stability over one year is rated at ±0.25% FS.
Total Error Band varies by range: ±4.5% gage for 70 mB; ±3% gage for 140 mB; ±1.5% gage and absolute for 350 mB; ±1% absolute for 1 to 20 bar; and ±1% gage for 1 to 700 bar.
- Response Time: 1 mS
- Bandwidth: DC to 1 kHz type
- Pressure Cycles: 1 x 10⁷ full scale cycles
- Shock Rating: 50 g 11 mSec half sine shock
- Vibration Rating: ± 20 g
Overload and Burst Limits
Pressure overload limits depend on the specific range:
- 70 mB to 3.5 bar Gage: 3 x rated pressure or 1.38 bar whichever is greater.
- 350 mB to 20 bar Absolute: 3 x rated pressure or 1.38 bar whichever is greater.
- 7 to 700 bar Gage: 2 x rated pressure.
Burst pressure limits are defined as:
- 70 mB to 3.5 bar Gage and 350 mB to 20 bar Absolute: 5 x rated pressure or 1.72 bar whichever is greater.
- 7 to 700 bar Gage: 5 x rated power.
Configuration Options
The PXM309 series offers three distinct electrical connection configurations, identified by model prefixes:
- PXM309 Series (Cable): Features a 1.5 m (5') cable with 2 or 3 conductors depending on output.
- PXM319 Series (mini DIN): Equipped with a mini DIN connector; mating connector included.
- PXM359 Series (M12 Connector): Utilizes an M12 4-pin connector. Note: For gage units below 70 bar, vented cable options are required for PXM359 models.
Output and Power
Selectable output signals include:
- 0 to 10 Vdc Output: Requires supply voltage of 15 to 30 Vdc at 10 mA.
- 4 to 20 mA Output: Requires supply voltage of 9 to 30 Vdc.
The units feature reverse polarity and over-voltage protection. Isolation from body to any lead is rated at 1 M Ω at 25 Vdc.
Materials and Construction
Housing material is Stainless Steel with an IP65 Environmental Rating. The process connection is a G ¼ Male Pressure Fitting. Wetted parts materials vary by range:
- 70 mB to 3.5 bar Gage: 316 SS.
- 350 mB to 20 bar Absolute: 316 SS.
- 7 to 700 bar Gage: 17-4PH SS.
Note that units in the 0 to 35 bar range may contain an HNBR o-ring in the wetted pressure port assembly. A sealing washer for G 1/4, stainless steel with FKM seal (PXMW-4) is included.
Key Product Differences
The series encompasses three model families distinguished by their electrical termination method:
- PXM309: Cable models with flying leads.
- PXM319: mini DIN connector models.
- PXM359: M12 4-pin connector models.
Model numbers follow the format PXM[Series]--, where output is designated as '10V' for 0 to 10 Vdc or 'I' for 4 to 20 mA. Pressure type suffixes include A (Absolute), G (Gage), V (Vacuum), and CG (Compound Gage). Each unit ships with a 5-point traceable calibration certificate.
PDF 및 매뉴얼