검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

LD500

정밀 팁이 있는 LVDT 선형 위치 센서

  • 높은 정확도 및 반복성
  • 소형 액추에이터에 이상적
  • 견고한 산업용 구조
  • 교체 가능한 팁
LD500
시작 2,420,710 원
정밀 팁이 있는 LVDT 선형 위치 센서 LD500 LD500
loading all models
제품 개요
  • 추가 기능 1 게이지 변환기
  • 대역폭 100 Hz (-3 dB)
  • 케이블 길이 2 m
  • 케이블 종류 절연 차폐
  • 전기 출력 DC
  • 입력 제어 신호 10 ~ 24 Vdc
  • 입력 전류 10 mA
  • 작동 온도, 최대 80 °C
  • 최소 작동 온도 -20 °C
  • 출력 리플 <1%
  • 반복성 <0.15 mm
  • 시리즈 ID LD500
  • 온도 계수 제로 : <0.01%/°C; 감도 : <0.01%/°C

Supported Applications

The Omega LD500 series consists of precision DC gaging transducers designed for automatic gaging in quality control, sorting, or go/no-go applications. These Linear Variable Displacement Transducers (LVDTs) are engineered for industrial automation environments where durability and repeatable readings are required.

Operating Conditions & Performance

The LD500 series operates within an ambient temperature range of -20 to 80°C. The transducers feature a response time of 1.5 ms with a frequency response of 100 Hz for -3 dB. Linearity is specified at 0.25% across the model ranges.

Repeatability performance varies by stroke length:

  • LD500-1 and LD500-2.5: <0.15 µm (6 µin)
  • LD500-5: <0.10 µm (4 µin)

The series utilizes a hybrid IC module to provide a linear mV/V/mm output compatible with standard DC input meters, recorders, data interfaces, and industrial controllers.

Configuration Options

The LD500 series is available in three specific stroke configurations. Each model includes hardened steel shafts, O-ring seals, and titanium pushrods for durability. The electrical connection consists of a 2 m (6') long, PVC 5-wire shielded cable.

Model Ranges and Sensitivity

  • LD500-1: ±1.0 mm (±0.04 inch) stroke; sensitivity of 78 mV/V/mm (1.98 mV/V/0.001 inch); spring rate of 13 g/mm.
  • LD500-2.5: ±2.5 mm (±0.10 inch) stroke; sensitivity of 78 mV/V/mm (1.98 mV/V/0.001 inch); spring rate of 13 g/mm.
  • LD500-5: ±5.0 mm (±0.20 inch) stroke; sensitivity of 56 mV/V/mm (1.98 mV/V/0.001 inch); spring rate of 10 g/mm.

Physical Dimensions and Materials

The body diameter is 19 mm (0.74 inch) for all models. Overall length varies by stroke: 86 mm (3.39 inch) for LD500-1 and LD500-2.5, and 164 mm (6.46 inch) for LD500-5. Wetted materials include a hardened steel shaft, titanium pushrod, and Nitrile or FKM gaiter.

Replacement Tips

The series supports various replacement tips to accommodate specific measurement geometries:

  • LD500-A: 4.75 mm (0.185 inch) diameter, 3.175 mm (0.125 inch) length.
  • LD500-B: 4.75 mm (0.185 inch) diameter, 3.56 mm (0.14 inch) length.
  • LD500-C: 4.75 mm (0.185 inch) diameter, 6.35 mm (0.25 inch) length.
  • LD500-D: 4.75 mm (0.185 inch) diameter, 7.925 mm (0.312 inch) length with a 90° angle.

Key Product Differences

The primary distinction between the LD500 models is the linear stroke range and resulting sensitivity. The shorter stroke models, LD500-1 and LD500-2.5, share identical dimensions for overall length (86 mm) and stem length (34 mm), as well as a higher sensitivity of 78 mV/V/mm. The longer stroke model, LD500-5, features an extended body with an overall length of 164 mm and a stem length of 116 mm to accommodate the ±5.0 mm range; this configuration provides improved repeatability (<0.10 µm) but lower sensitivity (56 mV/V/mm). All models operate on a power supply of 10 to 24 Vdc and include CE certification with a 1 YEAR WARRANTY.

ko-KR
ko_KR
설정 저장