검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

LC8400

대형 2.5인치~3.13인치 ID, 관통형, 압축 하중 셀

  • 5점 NIST 추적 교정 포함
  • 59 kOhm 션트 교정 데이터
  • 3.13, 4.00 및 4.50인치 외경 크기
  • 대형 내경 적용
LC8400
시작 1,566,783 원
대형 2.5인치~3.13인치 ID, 관통형, 압축 하중 셀 LC8400 LC8400
loading all models
제품 개요
  • 5점 보정 0%, 50%, 100%, 50%, 0%
  • 정확도 ± 0.5%
  • 케이블 길이 5 ft
  • 보정 옵션 5 포인트 NIST
  • 전기 연결 케이블
  • 전기 출력 2 mV/V
  • 힘 유형 압축
  • 히스테리시스 ± 0.5%
  • 입력 저항 360 Ω 최소
  • 선형성 ± 0.5%
  • 로드셀 타입 통과 구멍
  • 재료 17-4 PH 스테인리스 스틸
  • 작동 온도, 최대 121 °C
  • 최소 작동 온도 -54 °C
  • 출력 저항 350 ± 5 Ω
  • 과부하, 최대 300% FS
  • 공정 온도, 최대 71 °C
  • 최소 공정 온도 16 °C
  • 반복성 ± 0.5%
  • 안전 과부하 150% FS
  • 시리즈 ID LC8400
  • 공급 전력 참고 10 Vdc, 최대 15 Vdc
  • 공급 전압 10 Vdc
  • 열적 스팬 효과 ± 0.018% rdg/°C
  • 열 영점 효과 ± 0.009% FSO/°C
  • 배선/커넥터 테이블 녹색: (+) 출력; 흰색: (-) 출력; 검정: (-) 입력; 빨강: (+) 입력
  • 영점/밸런스 오차 ± 2%

Supported Applications

The Omega LC8313/LC8400 Series consists of large-ID through-hole compression load cells designed for applications requiring a substantial central opening. These donut-shaped sensors are engineered to measure forces on large bolts or suspended loads where the geometry necessitates a clearance hole.

  • Loading forces on large bolts
  • Suspended load measurement

Operating Conditions & Performance

The series provides compression measurements across capacities ranging from 0-1000 lb to 0-100K lb (0-455 kgf to 0-45,372 kgf). Accuracy is specified as ±0.5% linearity, hysteresis and repeatability combined. The sensors operate within an ambient temperature range of 16 to 71°C (60 to 160°F) and a process temperature range of -54 to 121°C (-65 to 250°F).

Electrical specifications include a load resistance of 350 ±5 Ω, an output signal of 2 mV/V nominal, and an excitation voltage requirement of 10 Vdc (15V maximum). Each unit includes a 1.5 m (5') 4-conductor shielded cable with the following wire color code: GN (+Output), WT (-Output), BK (-Input), RD (+Input).

Configuration Options

The series is available in three primary model families distinguished by outer diameter and selectable inside diameters (ID): LC8313, LC8400, and LC8450. All models are constructed from 17-4 PH stainless steel.

Dimensions

  • LC8313: OD 80 mm (3.13"), H 13 mm (0.50") with selectable IDs of 2.00" or 2.13".
  • LC8400: OD 102 mm (4.00"). Height is 25 mm (1.00") for capacities from 1K to 50K, and 51 mm (2.00") for capacities ≥100K. Selectable IDs are 2.00" or 2.13".
  • LC8450: OD 114 mm (4.50"), H 32 mm (1.25") with selectable IDs of 3.00" or 3.13".

Certifications and Calibration

The load cells feature NIST Standard certification and RoHS compliance. Units come complete with a 5-point NIST-traceable calibration and include a 59 kΩ shunt for data verification or simulation purposes.

Key Product Differences

Variants are differentiated by model family, capacity range, and inside diameter selection:

  • LC8313 Series (3.13" OD): Available in capacities from 1 K lb to 7.5 K lb with IDs of 2.00" or 2.13".
  • LC8400 Series (4.00" OD): Offers the broadest capacity range, spanning 1 K lb to 200 K lb. The physical height increases for capacities ≥100K. IDs of 2.00" or 2.13" are available.
  • LC8450 Series (4.50" OD): Supports capacities from 1 K lb to 50 K lb with larger inside diameters of 3.00" or 3.13".

The model number format follows the pattern [Model]-[ID Code]-[Capacity], where the ID code corresponds to the specific hole size (e.g., LC8450-300-1K for a 3.00" ID, 1 K lb capacity). Metric configurations are available upon consultation with engineering.

LC831384008450-200213300313-1K3K5K7.5K10K25K50K100K200K
외경
내경
하중 범위
ko-KR
ko_KR
설정 저장