검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

iServer2-Probe

iServer 2 - 가상 차트 레코더

iServer 2 - バーチャルチャートレコーダー
  • 내장 웹서버 및 디스플레이가 포함된 실시간 차트 기능 (선택 모델)
  • 최대 10년 내부 데이터 저장
  • 배터리 백업
  • M12-MT-079-2F 및 선택된 스마트 프로브(액세서리 참조)와 함께 사용 가능한 듀얼 Omega Link 스마트 프로브 기능
iServer2-Probe
시작 1,523,707 원
iServer 2 - バーチャルチャートレコーダー iServer2-Probe iServer2-Probe
loading all models
제품 개요
  • ACアダプターの動作温度 0 to 40 °C
  • 精度の詳細 Pressure: Accuracy Over Full Range: ± 6 mbar from 300 to 1100 mbar, Accuracy @ 25 °C: ± 4 mbar from 700 to 1100 mbar
  • アラーム 2つの接点入力 TTL 0.5 mA; 1つのオープンコレクタ出力 150 mA @ 30 Vdc
  • 承認 CE、UKCA、ICES-3(B)/NMB-3(B)、FCC
  • バッテリー作動温度 -18~55 °C
  • バッテリーのサイズと種類 アルカリ9V
  • ケーブル温度(最高) 125 °C
  • ケーブル温度(最低) -40 °C
  • コンフィグレーション 内部Web UI
  • データインターフェース イーサネット、USB
  • データインターフェースに関する注意事項 Ethernet (RJ45):1ポート(対応モデルでPower over Ethernet利用可能) 対応プロトコル:TCP、UDP、SNMP、SNTP、ARP、ICMP、DNS、HTTP、Telnet
  • 電気接続 M12 8ピン メス
  • フォームファクター 壁面取り付け
  • 高さ 4 in
  • ヒステリシス ± 0.8%
  • 入力タイプ 外部
  • LEDインジケータ 100 BASE-T、ネットワークリンクおよびアクティビティ、インターネット
  • 길이 12.99 in
  • 로깅 모드 固定間隔
  • 측정 유형 気圧、相対湿度、温度
  • 메모리 11 GB
  • 측정 횟수 3
  • 작동 온도, 최대 60 °C
  • 최소 작동 온도 0 °C
  • 압력 정확도 ± 6 mbar
  • 압력, 최대 1100 mBar
  • 압력, 최소 300 mBar
  • 프로브 유형 スマートプローブ
  • 상대 습도 0~80% 非結露
  • 상대습도 정확도 ± 2.5% RH
  • 응답 시간 温度: < 1秒、湿度: 8秒
  • 응답 시간 사양 참고 温度:1秒未満、湿度:8秒
  • 샘플, 최대 7500万サンプル、間隔1サンプル/秒、最大10,000データポイントまで連続記録、記録期間96時間
  • 센서 종류 プローブ
  • 시리즈 ID iServer2-Probe
  • 소프트웨어 Chrome、Edge、Firefoxなどの最新のウェブブラウザを使用して同じローカルネットワーク上でウェブサーバーにアクセス可能;インターネット経由でのファームウェアアップグレード;プローブデータログをCSVファイルにエクスポート
  • 저장 온도, 최대 85 °C
  • 보관 온도 최소 -40 °C
  • 공급 전류 1.5 A
  • 공급 전력 참고 バックアップバッテリー:9 V DC、アルカリ、消費電力:4 W、AC電源アダプター(付属)定格出力:12 V DC @ 1.5 A、PoE:IEEE 802.3AF、44 V - 49 V、消費電力10 W未満
  • 공급 전압 9から12 Vdc
  • 온도 정확도 ± 0.3°C
  • 최대 측정 온도 85 °C
  • 최소 측정 온도 -40 °C
  • 온도 반복성 ± 0.15 °C
  • 무게 1.44 lb
  • 폭 6.13 in

Supported Applications

The Omega iServer 2 Series is a virtual chart recorder and webserver designed for industrial data acquisition and monitoring. The series supports applications in clean rooms, computer rooms, HVAC systems, hospitals, laboratories, semiconductor fabs, electronic assembly, warehousing, museums, manufacturing facilities, farm animal shelters, greenhouses, pharmaceutical operations, food processing, and storage environments.

Operating Conditions & Performance

The iServer 2 unit operates within an ambient temperature range of 0 to 60 °C (32 to 140 °F). The internal backup battery supports operation from -18 to 55 °C (-0.4 to 131 °F), while the AC power adapter is rated for 0 to 40 °C (32 to 104 °F). Storage temperature ranges from -40 to 85 °C (-40 to 185 °F).

When configured with compatible Omega Link Smart Probes, the series supports measurement of Temperature, Relative Humidity, Barometric Pressure, Dewpoint, Humidex, and Heat Index. Performance specifications for the SP-003 Series probe include:

  • Temperature Range: -40 to 85 °C (-40 to 185 °F)
  • Accuracy at 25 °C: ±0.3 °C (±0.6 °F); Repeatability: ±0.15 °C
  • Response Time: Less than 1 second for Temperature; 8 seconds for Relative Humidity
  • Relative Humidity Accuracy at 25 °C: ±2.5 % (0 to 80 %) non-condensing with Hysteresis of ±0.8 %
  • Barometric Pressure Accuracy Over Full Range: ±6 mbar from 300 to 1100 mbar; ±4 mbar from 700 to 1100 mbar at 25 °C

The device features internal data storage up to 11 GB. At a sample rate of 1 second (max), memory capacity supports approximately 4 years with two active sensors or 2 years with four active sensors.

Configuration Options

The iServer 2 Series offers configurable models based on display presence, I/O capabilities, and power options. The series is housed in a rugged stainless steel enclosure measuring 101.6 mm L x 155.6 mm W x 330 mm H (4 in. L x 6.13 in. W x 12.99 in. H), weighing 655 g (1.44 lbs.) including the battery.

Model Configurations:

  • iS2-THB-B (Basic): M12 Smart Probe compatibility, no display, no relay or digital I/O, powered by AC to 12 V DC Adaptor.
  • iS2-THB-ST (Standard): Includes a 4.3" LCD display, Relay and Digital I/O, powered by AC to 12 V DC Adaptor.
  • iS2-THB-DP (Deluxe Probe): Features the 4.3" LCD display, Relay and Digital I/O, with Power over Ethernet (PoE) capability in addition to AC power.

Sensor Connectivity:

  • The series accepts up to two Omega Link Smart Probes via an M12 8-Pin connector. Dual probe functionality requires the PN: M12-MT-079-2F Y-splitter cable (sold separately).
  • Compatible probes include SP-003 Series, SP-004 Series, SP-005 Series, SP-006 Series, SP-010 Series, SP-014 Series, and SP-016 Series.

I/O and Communication:

  • Standard and Deluxe models include two contact inputs (TTL 0.5 mA) and one open collector output (150 mA @ 30 VDC).
  • Ethernet connectivity via RJ45 port supports TCP, UDP, SNMP, SNTP, ARP, ICMP, DNS, HTTP, Modbus TCP.
  • Power over Ethernet is available on qualifying models per IEEE 802.3AF (44 V – 49 V).

Power Options:

  • Input: 9 to 12 VDC.
  • Included AC Power Adapter nominal output: 12 VDC @ 1.5 A (Input 100 to 240 VAC, 50/60 Hz).
  • Backup Battery: 9 V DC alkaline providing up to 96 hours of logging at 5-second intervals with two connected probes.

Key Product Differences

The primary distinctions between models in the iServer 2 Series are defined by display availability, I/O functionality, and power delivery methods. The Basic model (iS2-THB-B) lacks a front panel display and relay/DIO outputs, serving as a headless webserver solution. Standard (iS2-THB-ST) and Deluxe Probe (iS2-THB-DP) models include the 4.3" LCD screen and digital I/O/relay terminals.

The Deluxe Probe model further differentiates itself by supporting Power over Ethernet, allowing operation without a separate AC adapter when connected to a PoE-enabled network switch. All M12 Smart Probe variants share identical sensor interface capabilities but differ in local visualization and control output options.

ko-KR
ko_KR
설정 저장