검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-I2-1

스테인리스 스틸 써모웰이 포함된 수질 모니터링용 침지 온도 프로브

  • 직접 벽면 장착
  • 6´케이블
  • 1/2" 내부 NPT로 더 산업적인 설치를 위한 도관 수용
Series-I2-1
시작 43,431 원
스테인리스 스틸 써모웰이 포함된 수질 모니터링용 침지 온도 프로브 Series-I2-1 Series-I2-1
loading all models
제품 개요
  • 케이블 길이 6 ft
  • 장착 방향 Fit 시리즈 IW2 써모웰에 1/2인치 나사산 연결
  • 작동 온도, 최대 240 °F
  • 최소 작동 온도 -32 °F
  • 프로브 직경 0.25 in
  • 시리즈 ID Series-I2-1
  • 보호관 재질 304 스테인리스 스틸

Supported Applications

The Dwyer Series I2-1 Immersion Temperature Probes are designed to monitor hot and chilled water lines throughout a building's water distribution loop. These sensors feature multiple temperature sensor outputs that allow connection to virtually any digital building controller.

A critical operational requirement is the use of a Series IW2 Thermowell on pressurized air and water lines to prevent leakage around the probe. The thermowells enable replacement of the temperature sensors without draining the water line.

Operating Conditions & Performance

The series operates within a process temperature range of -32 to 240°F (-35.5 to 115.5°C). Accuracy specifications vary by sensor element type:

  • Platinum RTD: ±0.6% @ 32°F (0°C)
  • Nickel RTD: ±0.5°F @ 32°F (0°C)
  • Balco RTD: ±0.1% @ 32°F (0°C)
  • Thermistors: ±0.36°F from 32 to 158°F (0 to 70°C)

Configuration Options

The Series I2-1 offers a broad selection of sensor technologies and insertion lengths configured for specific controller interfaces.

Sensor Types & Outputs

Available output signals include RTD and Thermistor elements. Specific model configurations support:

  • Pt 100 Ω RTD (e.g., I2-11062, I2-11042)
  • PT 1000 Ω RTD
  • Ni 1000 Ω RTD
  • Balco 1000 Ω RTD
  • Thermistors: 3K Ω, 5K Ω, 10K Ω Type 2, 10K Ω Type 3, 20K Ω, 100K Ω, and 2252 Ω

Dimensions & Construction

The probes feature a 1/4" (6.3 mm) diameter with insertion lengths of 4" or 6". Overall length is L = 7.000" for the 6" thermowell and L = 5.000" for the 4" thermowell. The process connection utilizes a 1/2" threaded interface to fit Series IW2 thermowells.

Materials

  • Sheath Material: 304 SS
  • Thermowell Material (Series IW2): 304 SS

Key Product Differences

Variants within the series are distinguished by sensor element type and insertion length. The model number guide follows the format I2-<SENSOR_TYPE>-<INSERTION_LENGTH>. For example, models ending in 62 indicate a 6" insertion length (e.g., I2-15062), while those ending in 42 indicate a 4" insertion length (e.g., I2-15042). The Series IW2 thermowells are available as separate components, such as the IW2-262 for 6" and IW2-242 for 4" applications.

액세서리

accessories

4" SS thermowell.
57,514원 / 개당
0 재고 있음
6" SS thermowell.
57,514원 / 개당
0 재고 있음
ko-KR
ko_KR
설정 저장