한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-HBAV
HVAC 전기 볼 밸브 – 온수/냉수 유량 제어, AC 모터
- 수동 오버라이드
- 분리형 액추에이터
- 높은 Cv 값
제품 개요
- 외함 등급 IP10, NEMA 타입 1
- 접액부 재질 금관, 부나-N (NBR), PTFE, 스테인리스 스틸
- 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, 정제 공정 / 냉각수, 호환 가능한 액체, 비활성 가스/비반응성 가스, 오일 / 윤활제, 유기 용매
- 작동 온도, 최대 158 °F
- 최소 작동 온도 -22 °F
- 포트 1 유형 NPT 암나사
- 포트 2 유형 NPT 암나사
- 압력 한계 최대 375 psi
- 압력 한계 사양 참고 최대: 375 psi (25 bar); 차단: 87 psi (6 bar)
- 공정 온도, 최대 122 °F
- 최소 공정 온도 23 °F
- 시리즈 ID Series-HBAV
- 공급 전력 참고 120 Vac 또는 24 Vac, 50/60 Hz, 단상
- 전원 유형 에어컨
- 밸브 위치 상시 폐쇄
- 밸브 종류 2방향
- 와이어 게이지 18 AWG
Supported Applications
The Dwyer Series HBAV is an electrical ball valve designed for flow control in hot and cold water HVAC systems. The product overview identifies typical use cases including air conditioning systems, heating systems, water treatment facilities, and production industries.
Operating Conditions & Performance
The series operates within specific ambient and process temperature limits while maintaining defined pressure ratings across its size range.
- Ambient Temperature: -22 to 158°F (-30 to 70°C)
- Process Temperature: 23 to 122°F (-5 to 50°C)
- Pressure Limits: Max: 375 psi (25 bar); Close off: 87 psi (6 bar)
- Cycle Time (per 90°): Sizes 1/2 to 1": 45 sec.; sizes 1-1/4 to 2": 50 sec.
- Enclosure Rating: NEMA 1 (IP10)
The valve body is a 2-way, normally closed (NC) design with wetted materials consisting of Brass, SS, NBR, and PTFE. The series supports compatible fluids as the designated service media.
Configuration Options
The Series HBAV offers configurable options for line size, supply voltage, input type, and actuator function to accommodate specific installation requirements.
- Line Size: 1/2" to 2" NPT with Female NPT end connections
- Supply Voltage: 120 VAC or 24 VAC, 50/60 Hz, single phase
- Input Types:
- Floating: 3-wire input
- Modulating: 4 to 20 mA (requires 24 VAC power only)
- Housing Material: Plastic, nylon, and polyoxymethylene
- Electrical Connection: 18 AWG
The actuator is electrically driven via a bidirectional AC motor. Features include a detachable actuator with position switches and an indicator.
Key Product Differences
Variants within the series are distinguished by size, voltage rating, and input configuration (Floating vs. Modulating). The model number guide follows the format HBAV<Size><Voltage><Input Type>.
- Floating Actuators: Available in 120 VAC or 24 VAC configurations for sizes 1/2" through 2".
- Modulating Actuators: Restricted to 24 VAC power supply. The model selection table lists modulating options (e.g., HBAV0224, HBAV0324) specifically for sizes 1/2", 3/4", and 1".
Physical dimensions vary by size; for example, the overall length (Dimension C) ranges from 4.53 [115] mm for 1/2" to 5.31 [135] mm for 2" sizes. Modulating models in sizes 1/2" through 1" include an electric cord attached on the outside, while modulating models in sizes 1-1/4" through 2" contain a 4-wire terminal block.