検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

PX409S

高精度、衛生用圧力トランスデューサー

고정밀 위생용 압력 트랜스듀서
  • 迅速な配送!在庫から1週間以内!
  • 衛生用またはCIP(現場洗浄)用途向け
  • ゲージ、複合ゲージ、絶対圧、真空および気圧範囲
PX409S
販売元 1,973,467 원
고정밀 위생용 압력 트랜스듀서 PX409S PX409S
loading all models

ぴったりのモデルが見つかりませんか?

カスタムコンフィギュレーターで夢の製品を作りましょう

製品の概要
  • 정확도 등급 < 0.1%
  • 정확도 세부 사항 ± 0.08% 최상의 선형성(선형성, 히스테리시스 및 반복성 결합) 복합 게이지 모델, 양방향이 아닌 양의 방향으로만 보정됨
  • 파열 압력 최대 정격 플랜지 압력까지 4배 전체 스케일
  • 최대 보상 온도 87.7 °C
  • 최소 보상 온도 -1.1 °C
  • 충전 유체 NEOBEE M5 식품 등급
  • 접액부 재질 316L 스테인리스 스틸
  • 최소 작동 온도 -15 °C
  • 프로세스 연결 유형 트라이클램프
  • 응답 시간 <1 ms
  • 시리즈 ID PX409S
  • 충격 50 g, 11 ms 하프 사인파(시험 중)
  • 션트 보정값 제로 및 스팬 값이 포함된 5점 NIST 추적 교정, 수평 방향으로 교정됨
  • 스팬 설정 조정 범위 ± 0.5% FS
  • 안정성 ± 0.1 %
  • 진동 ± 20 g
  • 무게 285 g
  • 영점/밸런스 오차 ± 0.5%

Supported Applications

The PX409S Tri-Grip Sanitary Series comprises high-accuracy sanitary pressure transducers and transmitters built on micro-machined silicon technology. They are designed for pressure or level measurement in clean-in-place (CIP) systems and are ideal for food processing, beverage and bio/pharmaceutical applications, as well as rugged industrial duties.

Process connection is by a 1-1/2 in or 2 in Tri-Grip fitting (compatible with Tri-Clamp), so the units work with commercially available sanitary pipes and fittings. Wetted parts are 316L SS in a welded stainless steel construction, and the fill fluid is NEOBEE M5 food grade. Every unit meets the Requirements of 3-A Sanitary Standards and ships with a 5-point NIST traceable calibration (zero and span values, calibrated in the horizontal direction).

Operating Conditions & Performance

Accuracy is ±0.08% BSL best straight line, combining linearity, hysteresis and repeatability; compound gage models are calibrated in the positive direction only. Response time is <1 mS, and long-term (1-year) stability is ±0.1% FS typical. Zero balance and span setting are each ±0.5% FS typical, ±1% max. The transducer withstands 1 million cycles of pressure and weighs 285 g.

The operating temperature range is -15 to 115 degC. The compensated temperature range is 4.4 to 60 degC for ranges ≤ 5 psi and -4 to 85 degC for ranges > 5 psi. Minimum isolation between case and output terminations is 100M Ohm @ 50 Vdc. Vibration is rated at ±20 g (under test) and shock at 50 g, 11 mS half sine (under test). The enclosure is IP65 or IP67 depending upon the electrical termination, and the unit is CE Compliant, meeting the industrial emissions and immunity standard IEC61326.

Four output types are available: 10 mV/V ratiometric on a 5 to 10 Vdc supply, 0 to 5 Vdc (supply 10 to 30 Vdc @ 10 mA), 0 to 10 Vdc (supply 15 to 30 Vdc @ 10 mA), and 4 to 20 mA (supply 9 to 30 Vdc; 9 to 20 Vdc above 105 degC).

The Tri-Grip fitting is rated to 600 psi using a suitable clamp, with over pressure of 4 x rated pressure to the maximum rated flange pressure and secondary containment of 6 x rated pressure to a maximum of 2000 psi (not in clamp). Pressure ranges span gage (10 inH2O to 600 psi), absolute (5 to 600 psi), compound gage (±10 inH2O to ±15 psi), vacuum/negative gage (0 to -10 inH2O to 0 to -15 psi) and barometric (0 to 32 inHg; 0 to 1100 hPa, 550 to 1100 hPa, 880 to 1100 hPa).

Configuration Options

Models are differentiated first by electrical termination, which also sets the enclosure protection:

  • PX409S — 2 m cable with flying leads, IP67 rating.
  • PX419S — mini DIN connector (mating connector supplied), IP67 rating absolute, IP65 rating gage.
  • PX429S — twist-lock connector (mating connector PT06F10-6S sold separately), IP67 rating absolute, IP65 rating gage.
  • PX459S — M12 connector (M12 cables sold separately), IP67 rating absolute, IP65 rating gage.

A conduit variant, PX409CS, replaces the cable with a 1/2 NPT conduit/cable fitting. Beyond termination, models differ by fitting size (15 = 1-1/2 in Tri-Grip, 20 = 2 in Tri-Grip), by output type (10 mV/V, 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA), and by pressure type (gage, absolute, compound gage, vacuum or barometric). The PXM409S metric variants provide ranges specified directly in bar, mbar and hPa rather than psi.

Key Product Differences

Each catalog number is assembled from the base series, a fitting-size code, a range code and an output suffix — for example PX409S15-005GV designates the 2 m cable termination, 1-1/2 in Tri-Grip fitting, and a gage 10 mV/V output. Output suffixes identify the pressure and signal type (for instance GV = gage 10 mV/V, AV = absolute 10 mV/V, CGV = compound gage, VV = vacuum, with the trailing I, 5V or 10V denoting 4 to 20 mA, 0 to 5 Vdc or 0 to 10 Vdc).

The termination-based model families are PX409S (cable), PX409CS (1/2 NPT conduit), PX419S (mini DIN), PX429S (twist-lock) and PX459S (M12), with a parallel PXM409S metric line.

Compatible meters include the DP41-S, DP41-E, DP41-B and DP25B-E. Documented accessories include the CX5302 extra mini DIN connector for the PX419 Series, the PT06F10-6S mating twist-lock connector for the PX429 Series, and the M12C-PVC-4-S-F-5 straight and M12C-PVC-4-R-F-5 right-angled M12 cables, each 5 m (16.4 ft) long, for the PX459.

アクセサリー

accessories

Environmentally protected connector with 6 female contacts, -55 to 125 °C (-67 to 257 °F) temperature range
¥8,300 / 各
0 facet.availability.sku_availability

cables

DC Cable Assemblies for Probes, Sensors and Transmitters
/ 各
0 facet.availability.sku_availability
DC Cable Assemblies for Probes, Sensors and Transmitters
/ 各
0 facet.availability.sku_availability
PXPXM409S409CS419S429S459S1520-10W0012.5005015030050100150250500600162632025H070H170H350H001B002B3.5B007B010B17.5B035B040B1100HB550HB880HBGCGSGAVBV5V10VIUSBH
라인
단자
공정 피팅 / Tri-Grip 플랜지 크기
범위
압력 유형
출력 유형
ja-JP
ko_KR
設定を保存する