한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
LCFD
High Accuracy, 0.75 in to 1 in Diameter, Miniature Inline Load Cells
고정밀, 직경 0.75인치~1인치, 소형 인라인 로드셀
재고가 있는 모델
- 고정밀
- 5점 교정 NIST 추적 가능 교정 포함
- 소형 크기
- 전면 산업용 등급 스테인리스강(예: 304/316 SS)
제품 개요
- 5점 보정 0%, 50%, 100%, 50%, 0% (인장 시)
- 브리지 저항 350 Ω
- 보정 옵션 5 포인트 NIST
- 전기 연결 케이블
- 외함 등급 IP65
- 힘 유형 압축, 긴장
- 로드셀 타입 인라인
- 재료 스테인리스 스틸
- 작동 온도, 최대 121 °C
- 최소 작동 온도 -54 °C
- 과부하, 최대 300% FS
- 공정 온도, 최대 71 °C
- 최소 공정 온도 16 °C
- 안전 과부하 150% FS
- 시리즈 ID LCFD
- 열적 스팬 효과 ± 0.009% FSO/°C
- 열 영점 효과 ± 0.009% FSO/°C
- 배선/커넥터 테이블 빨강: (+) 전원; 검정: (-) 전원; 녹색: (-) 신호; 흰색: (+) 신호
- 영점/밸런스 오차 ± 2%
Supported Applications
The Omega LCFD and LCMFD series are subminiature tension or compression high accuracy load cells designed for precision industrial applications. These miniature inline sensors measure both tension and compression loads, featuring male thread studs for direct load attachment.
- Precision force measurement in compact spaces
- Applications requiring superior long-term stability
- Situations where minimized off-axis load effects are critical
Operating Conditions & Performance
The series covers a broad capacity envelope ranging from 10 N to 5000 N (metric) and 2.2 lb to 1000 lb (standard). Accuracy is specified as ≤100 lb/500 N: ±0.15% FSO for lower capacities, and ≥250 lb/1000 N: ±0.20% FSO for higher ranges. Repeatability follows the same tiered structure: ≤2.2 lb: ±0.15% FSO; ≥5 lb/10 N: ±0.20% FSO.
Performance is maintained across an ambient operating temperature of 16 to 71°C (60 to 160°F) and a process temperature range of -54 to 121°C (-65 to 250°F). The units carry an IP65 enclosure rating. Electrical output varies by capacity: 2.2 lb/10 N models provide 1.5 mV/V (nom), while ≥5 lb/20 N models deliver 2 mV/V (nom).
Excitation Requirements
- ≤10 lb/50 N: 5 Vdc
- ≥25 lb/100 N: 10 Vdc
The load resistance is specified as a minimum of 350 Ω. Each unit includes a 5-point NIST-traceable calibration and a 59 kΩ shunt.
Configuration Options
The LCFD/LCMFD series offers standard (LCFD) and metric (LCMFD) model configurations to accommodate different capacity requirements. The housing is constructed from stainless steel, providing durability for industrial environments.
Process Connections & Dimensions
- Thread types vary by capacity: #6-32 UNC (1 kg to 10 lb), M5 x 0.8 (10 to 50 N), #10-32 UNF (25 to 100 lb), M6 x 1.0 (100 to 500 N and 1 to 5 kN), and ¼-28 UNF (250 to 1000 lb).
- Overall diameters range from 19 mm (0.75 in) for the smallest capacities up to 25.4 mm (1.00 in) for larger ranges.
Cable & Connector
Units are supplied with a 1.5 m (5') 4-conductor, shielded cable featuring an S.S. Strain Relief connector. The wire color code is Red (E+), White (S+), Black (E-), and Green (S-). Models ≤10 lb/50 N utilize SS overbraided PTFE with a temperature compensation board.
Accessories & Compatibility
- Accessory Rod Ends: REC-006F, REC-010F, REC-014F (standard); MREC-M5F, MREC-M6F (metric).
- Compatible Meters: DP41-S, DP25B-S, and DPiS.
Certifications
The series is compliant with NIST Standard and RoHS standards.
Key Product Differences
Variants are distinguished by capacity range and unit system. The LCFD models serve standard capacities (lb), while the LCMFD models address metric requirements (N). Specific model numbers correspond directly to capacity, such as LCFD-1KG for 1 kg or LCMFD-5KN for 5000 N.
- LCFD Series: Capacities from 2.2 lb up to 1000 lb (e.g., LCFD-5, LCFD-1K).
- LCMFD Series: Capacities from 10 N up to 5000 N (e.g., LCMFD-10N, LCMFD-5KN).
Note regarding compatible meters: The DPiS meter is suitable for one direction measurement only.
액세서리
accessories
installation hardware
meters/controllers
1/8 DIN Thermocouple and RTD Panel Meter with Large, Selectable Color Display
AUD823.61 / each
0 재고 있음