검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

LDi-127

로드 엔드가 있는 고강도 LVIT 선형 위치 센서

재고가 있는 모델
  • 내구성이 뛰어나고 장기간 사용 가능한 비접촉식 장치
  • 우수한 스트로크 대 길이 비율
  • IP67 등급 밀폐된 27 mm(1.05인치) 직경의 양극 산화 알루미늄 하우징
  • 25~450 mm(1~18인치) 전체 범위 선택 가능
LDi-127
시작 1,617,443 원
재고가 있는 모델
로드 엔드가 있는 고강도 LVIT 선형 위치 센서 LDi-127 LDi-127
loading all models
제품 개요
  • 추가 기능 1 방사형 출구 케이블 및 두 개의 회전식 로드 아이 엔드
  • 추가 기능 2 중장비 산업용 유닛
  • 대역폭 300 Hz (-3 dB)
  • 외함 등급 IP67
  • 하우징 재질 양극화 알루미늄
  • 작동 온도, 최대 85 °C
  • 최소 작동 온도 -20 °C
  • 상대 습도 95% RH, 비응축
  • 해상도 FS의 0.025%
  • 시리즈 ID LDi-127
  • 충격 1000 g, 11 ms
  • 온도 계수 0.015% FS/°C
  • 진동 5~20 Hz, 0.5" p-p; 20~2000 Hz, 4.2 g p-p

Supported Applications

The Omega LDi-127 series comprises Heavy Duty Linear Variable Inductive Transducers (LVIT) designed for contactless linear position sensing. These sensors are engineered for factory automation and industrial or commercial applications, including solar cell positioners, wind turbine prop pitch and brakes, chute or gate positions on off-road or agri-vehicles, and packing equipment. The series is also suitable for industrial testing, laboratories, in-plant operations, and mobile equipment OEM applications.

Operating Conditions & Performance

The LDi-127 sensors operate within an ambient temperature range of -20 to 85°C (-4 to 185°F) with a humidity rating of 95% RH, non-condensing. The series features an IP67 enclosure rating and is constructed from Anodized Aluminum housing. Performance specifications include a typical accuracy of ±0.15% of Full Scale Output (FSO), with a maximum accuracy of ±0.25%. Resolution is specified at 0.025% of FS, and the nominal response time is 300 Hz.

Environmental durability ratings for the series include:

  • Shock Rating: 1000 g, 11 ms
  • Vibration Rating: 5 to 20 Hz at 0.5" p-p; 20 to 2000 Hz at 4.2 g p-p

Power and Output Requirements

The sensors require a DC power supply dependent on the output configuration:

  • For 0-10 VDC output: 12 to 30V DC input.
  • For 4-20 mA output: 18 to 30V DC input (minimum).

Note: The 4-20 mA DC output is a 3-wire sourcing configuration and should not be connected to a 2-wire loop-powered system.

Configuration Options

The LDi series offers configurable linear ranges from 25 mm (1") to 450 mm (18"). The sensors are available with two primary output signal types: 0-10 VDC or 4-20 mA. Each unit includes a radial exiting cable, 1 m (3.3') long, equipped with strain relief and two swivel rod eye ends for installation.

Wiring Configuration

The series supports field programmability via the white conductor or Pin B. The standard wiring assignments are:

  • Red (Pin E): + Power Input (12-30 V DC)
  • Black (Pin D): Common Ground
  • Green (Pin A): Analog DC Output (0 - 10 V or 4 - 20 mA)
  • White (Pin B): Field Programmability (calibration)

An alternative electrical connection option is available using a PTO2-10 6-pin connector.

Field Programmability Ranges

The sensors support field programmable calibration ranges:

  • 0-20% Range: Configurable for 0-10 VDC or 4-20 mA output, with a maximum of 20% at both ends.
  • 80-100% Range: Configurable for 0-10 VDC or 4-20 mA output, with a maximum of 20%.

The default setting is the full range (0 to Full Scale).

Housing and Dimensions

All models feature a housing diameter of 27 mm (1.05"). The overall length 'A' varies by measurement range, ranging from 114.3 mm (4.5") for the 25 mm model to 546.1 mm (21.5") for the 450 mm model.

Key Product Differences

The series is divided into two primary sub-series based on measurement range and physical length:

  • LDI-127 Series: Covers linear ranges from 25 mm to 200 mm (1" to 8").
  • LDI-128 Series: Covers linear ranges from 250 mm to 450 mm (10" to 18").

The LDI-119 is noted as a smaller body version intended for non-heavy-duty applications, distinct from the Heavy Duty LDi-127/128 series. Model numbers follow the structure LDI-<SERIES>-<RANGE>-<OUTPUT>-<OPTIONS>, where output codes denote 0 to 10 VDC (A010) or 4 to 20 mA (A020).

ko-KR
ko_KR
설정 저장