한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
LVRD10-Series
유도파 레이더 레벨 트랜스미터
- 탱크 매핑이 포함된 3, 6 및 9.8피트 크기의 간단한 길이 맞춤형 설계
- 선택 가능한 신호 페일세이프 출력 기능을 갖춘 페일세이프 진단
- 거짓 에코 신호의 인식, 저장 및 거부
- Nema 4(IP66) 알루미늄 인클로저
제품 개요
- 정확도 ± 0.118인치
- 추가 기능 1 False Echo Rejection
- 전선관 연결 1/2인치 NPT 암나사
- 구성 PC Windows® USB 2.0
- 데드밴드 4인치
- 유전체 상수 > 2
- 전기 출력 4 ~ 20 mA
- 인클로저 재질 알루미늄
- 외함 등급 IP66, NEMA 타입 4
- 피드스루 자료 316L 스테인리스 스틸, PEEK
- 접액부 재질 316L 스테인리스 스틸, 스테인리스 스틸
- 미디어 호환성 정제 공정 / 냉각수, 부식성 화학물질 / 산성 / 염기, 유압유, 액체 연료, 오일 / 윤활제, 식수/음용수
- 와이어 수 3
- 최대 작동 압력 250 psi
- 최소 작동 압력 -14.5 psi
- 전력 소비 < 24 Vdc 50 mA
- 프로세스 연결 크기 3/4인치
- 프로세스 연결 유형 NPT 수나사
- 공정 온도, 최대 150 °C
- 최소 공정 온도 -40 °C
- 반복성 < 0.08"
- 해상도 < 0.04"
- 시리즈 ID LVRD10-Series
- 신호 페일세이프 4 to 20 mA, 21 mA or hold last value
- 공급 전압 10 ~ 30 Vdc
Supported Applications
The Omega LVRD10 Series Guided Wave Radar Level Transmitters utilize Time Domain Reflectometry (TDR) technology for precise continuous level measurement. The series is intended for low corrosive chemical, waste, oil, or water storage applications in above-grade metal or reinforced concrete tanks and below-grade tanks of any material.
Based on probe configuration, the LVRD10 Series supports specific media characteristics:
- Rod and Cable probes: Recommended for viscous, crystallizing, adhesive, coating, or sticky liquids; fibrous liquids, sludge, slurry, pulp; and liquids containing solid particles. These configurations are also recommended when cleanability of the probe is important.
- Coaxial probes: Recommended for non-metallic tanks (plastic, fiberglass) as well as metallic tanks or below-grade concrete basins. Coaxial designs are preferred for measuring low reflectivity liquids with a dielectric constant [er] >1.8.
- All probe types: Suitable for installations in tall and narrow risers, difficult geometries, close to internal objects/obstructions or tank walls, where liquid spray may touch the probe above the surface, or near non-stationary interference targets such as agitator blades.
Operating Conditions & Performance
The LVRD10 Series operates with a supply voltage of 10 to 30VDC (reverse-polarity protected) and provides an analog output signal of 4 to 20mA, 3-wire. The device features galvanic insulation and disturbance signal suppression.
- Accuracy: ±3mm under reference conditions (dielectric constant [er] =80, water surface, tank 1m, DN200 metal flange).
- Repeatability & Resolution: Repeatability is <2mm; resolution is <2mm.
- Response Time: 5s with a start-up time of <6s.
- Ambient Temperature (Operation): -13° to 176°F (-25° to 80°C).
- Ambient Temperature (Storage): -40° to 185°F (-40° to 85°C).
- Process Pressure: -14.5 to 250 psi (-1bar to 17.2bar).
- Media Requirements: Dielectric [er] >1.8; no restrictions on conductivity or density.
Process temperature limits vary by probe type: Rod and Cable probes support -40° to 302°F (-40° to 150°C), while Coaxial probes support -40° to 266°F (-40° to 130°C).
Configuration Options
The series is configurable across three primary probe styles—Rod, Cable, and Coaxial—with varying measurement ranges and mounting options.
- Probe Types & Ranges: Rod (LVRD11) and Coaxial (LVRD12) probes are available in standard lengths up to 3.0m (9.84'), with shorter variants at 0.91m (3.0') and 1.82m (6.0'). Cable probes (LVRD13) extend the measurement range to 5.5m (18.0'). Custom probe lengths can be ordered in 5mm increments.
- Process Connections: Standard models feature a ¾" NPT process mount; variants with "G" suffixes utilize a ¾ G connection.
- Housing & Enclosure: The housing is constructed from Aluminum alloy EN AC-AlSi9Cu3 (DIN EN 1706) with an epoxy spray coating (~70μm), rated IP66 and NEMA 4. It includes a single cable entry ½" NPT.
- Wetted Materials: Rod, Cable, and Coaxial probes utilize wetted materials of 1.4404 / 316L SS or PEEK (Cable also lists 1.4404 / 316 SS).
- Configuration & Output Options: The sensor is configured via PC Windows® USB 2.0 software. Signal fail-safe options include 4 to 20mA, 21 mA, or hold last value.
Key Product Differences
The LVRD10 Series distinguishes models by probe geometry and connection type:
- LVRD11 (Rod): Single rod design with a 4mm diameter. Recommended for applications involving sticky, fibrous, or particulate-laden liquids where cleanability is critical.
- LVRD12 (Coaxial): Features a 21.3mm (0.84") probe within a ½" pipe structure. This design is recommended for non-metallic tanks and low dielectric constant liquids, though it is not recommended for sticky or fibrous media.
- LVRD13 (Cable): Utilizes a 4mm type 7x19 cable with an attached weight. Like the rod probe, it supports viscous and slurry applications but offers extended range up to 5.5m (18').
- Mounting Variants: Models ending in "G" (e.g., LVRD11G) indicate a ¾ G process connection instead of the standard ¾ NPT.
PDF 및 매뉴얼
소프트웨어 및 드라이버