검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-DR4

유리 유량계(공기/수용), 1.5배 확대, 내구성, 산업용

  • High-flow glass flow meter with direct-reading scale for air or water - built for demanding industrial service
  • Wetted materials: borosilicate glass tube, 316 SS float, PTFE stops; brass or 316 SS fittings
  • Rated up to 200 psig (13.8 bar) and 250 °F (121 °C) for rugged process environments
  • Permanently-fused ceramic scale and 1.5× magnification lens for clear readings and reduced fatigue
Series-DR4
시작 1,856,806 원
유리 유량계(공기/수용), 1.5배 확대, 내구성, 산업용 Series-DR4 Series-DR4
loading all models
제품 개요
  • 정확도 세부 사항 ± 10% FS @ 70 °F (21.1 °C) 및 14.7 psia (1 atm 절대압)
  • 최소 가스 유량 0.5 SCFM
  • 장착 방향 수직
  • 압력 유형 궤간
  • 프로세스 연결 크기 3/8인치
  • 프로세스 연결 유형 NPT 암나사
  • 반복성 ± 0.25%
  • 반복성 주의사항 스케일 판독값의 ±0.25%
  • 시리즈 ID Series-DR4
  • 턴다운비 10:1

Supported Applications

The Dwyer Series DR4 High Flow Glass Flowmeters provide a direct reading solution for fluid flow indication at higher capacity levels. Designed to withstand harsh industrial applications, these variable area meters are configured with permanently fused ceramic scales and integral float guides.

  • Measurement of compatible gases or liquids
  • Dedicated air (scfm) and water (GPM) scale options for direct reading without conversion
  • Industrial environments requiring durable glass construction with safety blow-out back panels

Operating Conditions & Performance

The Series DR4 operates within specific temperature, pressure, and accuracy envelopes defined by the series specifications. The meters feature a 10:1 turn-down ratio and utilize reflective plastic backgrounds with 1.5X magnification lenses to reduce eye fatigue.

  • Accuracy: ±10% FS @ 70°F (21.1°C) and 14.7 psia (1 atm absolute)
  • Repeatability: ±0.25% of scale reading
  • Temperature Limits: 250°F (121°C)
  • Pressure Limits: 200 psig (13.8 bar)
  • Mounting Orientation: Vertical mounting required

Measurement Ranges

The series supports the following flow ranges for air and water on a 127 mm scale length:

  • Air: 0.2-4 scfm (5-120 SLPM), 0.5-11 scfm (20-320 SLPM), or 1-16 scfm (20-500 SLPM)
  • Water: 0.1-2 GPM (0.5-8 LPM), 0.2-4 GPM (1-16 LPM), or 0.5-5 GPM (1-22 LPM)

Configuration Options

The Series DR4 is configurable across valve options, wetted materials, and scale types to match specific process requirements.

Housing and Valve Options

  • Without Valve: Models available with Brass or 316 SS end fittings (e.g., DR4101, DR4201)
  • With Valve: Standard configuration includes a 6-turn needle valve; models available in Brass or 316 SS (e.g., DR4141, DR4241)

Wetted Materials

  • Flowtube: Borosilicate glass
  • Float: 316 SS
  • Float Stops: PTFE
  • End Fittings: Brass or 316 SS (depending on model selection)
  • O-rings: Buna-N on brass models; fluoroelastomer on stainless steel models

Scales and Connections

  • Scale Type: Direct reading 127 mm scales for air or water (add suffix "M" for metric scale)
  • Process Connection: 3/8" female NPT

Key Product Differences

The Series DR4 model numbering distinguishes between valve inclusion and material construction. Models ending in specific digits correspond to the flow range, while the prefix indicates configuration.

  • Brass Construction: Identified by models such as DR410X (without valve) or DR414X (with valve).
  • Stainless Steel Construction: Identified by models such as DR420X (without valve) or DR424X (with valve).

The series includes a safety blow-out back panel for additional protection. Care must be taken during installation to avoid sudden pressure surges, which can damage the meter if exposed directly to full line pressure.

ko-KR
ko_KR
설정 저장