한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Model-670
후드 모니터(핫 와이어 센서 및 장착 키트 포함) 안전 환기를 위해
- 유연한 표면 또는 플러시 마운팅
- LED 안전 및 알람 상태 표시기
- 가청 알람
- 셔터 알람 입력
- 야간 절전 입력
제품 개요
- 정확도 ± 10%
- 경보 표시 적색 LED 및 경보음
- 제어 출력 릴레이
- 호른 사일런스 예-임시 및 영구
- LED 표시기 빨간색: 경보; 초록색: 정상
- 저속 경보 지연 5 s
- 장착 세미 플러시, 플러시 또는 표면 장착
- 작동 온도, 최대 86 °F
- 최소 작동 온도 55 °F
- 야간 세트백을 위한 릴레이 입력 24V dc 사용 시 2선식 정격
- 릴레이 출력 5 A @ 250 Vac
- 새시 하이 인디케이션 2선 마이크로 스위치 또는 3선 근접 스위치 입력, 24 Vdc 사용 등급
- 시리즈 ID Model-670
- 저장 온도, 최대 150 °F
- 보관 온도 최소 -40 °F
- 공급 전력 참고 15 Vdc 500 mA; 120 Vac, 60 Hz 전원 변압기 포함
- 전원 유형 AC / DC
- 무게 5 oz
Supported Applications
The Dwyer Model 670 Fume Hood Monitor is designed for fume hood face velocity air flow measurement in laboratory environments. It continuously senses airflow through the face of a fume hood to ensure safe levels of fresh air are exhausting, utilizing a hot wire sensor capable of detecting very low flows common on these units.
Operating Conditions & Performance
The series measures air velocity within an alarm range of 30-400 FPM (0.15-2.0 m/s) with an accuracy of face velocity ±10%. A fixed low air velocity alarm delay is set to 5 s. The unit operates in ambient temperatures from 55 to 86°F (13 to 30°C), while storage temperature limits are -40 to 150°F (-40 to 65°C). Power requirements include 15 VDC at 500 mA, with a 120 VAC, 60 Hz power transformer included.
Configuration Options
The Model 670 provides visual and audible status indication alongside configurable inputs for facility integration. Key capabilities include:
- Status Indication: Visual LEDs (Red: Alarm, Green: Normal) and an audible alarm with temporary or permanent horn silence options.
- Relay Output: Low air flow alarm relay rated for 5 A @ 250 VAC.
- Inputs: Relay input for night setback (2-wire, rated for 24 VDC usage) and sash high indication using a 2-wire micro switch or 3-wire proximity switch input (rated for 24 VDC usage).
- Communication: RS232 comm port connectable via serial interface to a LAN network.
- Mounting & Installation: Semi-flush, flush, or surface mounted using the included bracket. The unit ships with 24" of tubing for connecting to the inside of the hood wall.
The sensor should be positioned to see room pressure; ideal placement is 100mm back from sash glass and 100mm higher than normal sash opening height. Tube lengths exceeding 1 meter or smaller diameters may restrict airflow, causing instability or incorrect readings.
Key Product Differences
The series consists of the Model 670 Fume Hood Monitor configuration. The unit weighs 5.0 oz (141 g) and carries CE agency approval. Dimensions are listed as 5-45/64 [145.03] inches in height, 3-29/64 [87.88] inches in width, with a depth of 1-1/16 [27.10].