検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-636

固定レンジ圧力トランスミッター、SS、±0.30%精度、防爆型

고정 범위 압력 트랜스미터, SS, ± 0.30% 정확도, 방폭형
  • 長寿命でメンテナンスコストが低減され、総所有コストを削減
  • プロセスおよび作業者の保護が必要な用途向けの防爆ハウジング
Series-636
販売元 1,808,912 원
고정 범위 압력 트랜스미터, SS, ± 0.30% 정확도, 방폭형 Series-636 Series-636
loading all models
製品の概要
  • 精度 ± 0.3 %
  • 精度の詳細 較正スパンの±0.30%(線形性、ヒステリシス、再現性(BFSL)を含む)、25°C(77°F)、12 Vdc励起時
  • 応用例 石油・ガス
  • 補償温度、最大 180 °F
  • 補償温度、最小 -20 °F
  • コンプライアンスに関する注意事項 FMおよびCSA認定の爆発防止構造、クラスI、ディビジョン1、グループB、C、D、クラスIIグループE、F、G、クラスIII対応
  • 電気接続 3/4インチ NPT メスコンジット(ケーブル付き)
  • 電気出力 0~20 mA
  • エンクロージャーの定格 IP56, NEMA タイプ 4
  • 充填液 DC 200 シリコーンオイル
  • ループ抵抗 900 Ω 最大 @ 30 V
  • 材料、湿潤 316Lステンレス鋼
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, プロセス水/冷却水, HVAC / 室内空気, 不活性/非反応性ガス, 油/潤滑油, 有機溶剤
  • 動作温度(最高) 140 °F
  • 動作温度(最低) -40 °F
  • 出力詳細 4~20 mA DC、最大30 mA DCまで
  • 出力信号 電流
  • 圧力タイプ ゲージ
  • プロセス接続サイズ 1/2インチ
  • プロセス接続タイプ NPT メス
  • プロセス温度(最高) 212 °F
  • プロセス温度(最低) -40 °F
  • 耐圧力 Up to 45 psi
  • シリーズID Series-636
  • スパン調整 ± 0.16 mA
  • 安定性 上限範囲の±0.5%(6か月間)
  • 電源注記 12-30 Vdc (636)、8-14 Vdc (636LP)、逆極性保護
  • 電源タイプ DC
  • 供給電圧 12から30Vdc
  • 熱効果 ± 2.0%/50 °F(ゼロ点およびスパンを含む)。-20~180 °F(-29~82 °C)間。± 2.0%/50 °F(28 °C)。
  • 重量 374 g
  • 線径 22 AWG
  • ゼロ点設定調整範囲 ± 0.32 mA

Supported Applications

The Series 636 Fixed Range Pressure Transmitter is a low-cost, fixed-range, all stainless steel transmitter that converts liquid, gas or vapor pressure into a 4-20 mA DC output (or 1-5 VDC on the 636LP). All 316L SS construction makes it compatible with most corrosive media, and it is designed to continuously measure pressure for years even in tough environmental and media conditions.

  • Continuous pressure measurement of liquid, gas or vapor
  • Corrosive-media service using 316L SS wetted parts
  • Explosion-proof, offshore and hazardous-location installations

The transmitter is FM and CSA approved explosion-proof for Class I, Division 1, Groups B, C and D; Class II, Groups E, F and G; and Class III, and it meets NACE standards for offshore applications. It is weatherproof with a NEMA 4 (IP56) enclosure rating.

Operating Conditions & Performance

Accuracy is ±0.30% of calibrated span including linearity, hysteresis and repeatability (BFSL) at 25°C (77°F) and 12 VDC excitation, with stability of ±0.5% of upper range limit for six months. Pressure limits are 300% of the upper range limit.

  • Output signal: 4-20 mA DC, limited to 30 mA DC (636); 1-5 VDC (636LP).
  • Power: 12-30 VDC (636), 8-14 VDC (636LP), with reverse polarity protection.
  • Loop resistance: 900 Ω max @ 30 V.
  • Process temperature: -40 to 100°C.
  • Ambient (electronics) temperature: -40 to 60°C.
  • Compensated temperature range: -29 to 82°C, with a thermal effect of ±2.0% per 50°F (28°C).

Zero and span adjustments are Null 4.0 mA ±2% span and Span 16.0 mA ±1% span on the 636 (1 VDC and 4 VDC on the 636LP). The process connection is 1/2" female NPT and the electrical connection is a 3/4" female NPT with a 24" (61 cm), 22 AWG lead. The fill fluid is DC 200 silicone and the transmitter weighs 0.83 lb (374 g).

Configuration Options

Models differ by fixed pressure range and by output type, so the transmitter can be selected for the exact span and signal the loop requires.

  • Fixed range: each model is factory-set to one span, from 0 to 1 bar up to 0 to 20 bar.
  • Output type: the standard 636 provides a 4-20 mA DC signal, while the 636LP provides a 1-5 VDC signal and runs on 8-14 VDC.

The NISTCAL-PT1 option adds a NIST traceable calibration certificate to any model.

Key Product Differences

The model number is 636-<model>. The defined fixed ranges, all with a 4-20 mA output, are:

  • 636-0 is factory-set to a span of 0 to 1 bar.
  • 636-1 is factory-set to a span of 0 to 2 bar.
  • 636-2 is factory-set to a span of 0 to 7 bar.
  • 636-3 is factory-set to a span of 0 to 20 bar.

Additional fixed-range models 636-4, 636-6 and 636-7 complete the lineup, and the 636LP provides the low-power 1-5 VDC output option.

ja-JP
ko_KR
設定を保存する