검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

FOS-Series

광섬유 온도 센서

재고가 있는 모델
  • 온도 범위 -200°C ~ 250°C
  • 센서는 재교정이 필요 없음
  • 정확도 ± 0.8 °C (상대 온도에서 ± 0.2 °C)
  • FOS-LU-* 모델은 폴리이미드 재질로 코팅된 더 내구성 있는 센서 팁을 특징으로 함
FOS-Series
시작 621,538 원
재고가 있는 모델
광섬유 온도 센서 FOS-Series FOS-Series
loading all models
제품 개요
  • 정확도 ± 0.8 °C (± 1.44 °F)
  • 추가 기능 1 없음
  • 전기 연결 ST 커넥터
  • 프로브 직경 0.0625 in
  • 공정 온도, 최대 250 °C
  • 최소 공정 온도 -200 °C
  • 반복성 0.2°C
  • 응답 시간, 최대 200 ms
  • 응답 시간, 최소 0 ms
  • 응답 시간 사양 참고 최대 200 ms
  • 시리즈 ID FOS-Series

Supported Applications

The Omega FOS-Series Fiber Optic Temperature Sensors are designed for temperature measurement in environments where immunity to electromagnetic interference (EMI), radio frequency interference (RFI), nuclear magnetic resonance (NMR), and microwave radiation is required. The series utilizes light transmission through fiber optic cables rather than resistance or voltage, providing reliable signal transfer without degradation due to cable length.

Operating Conditions & Performance

The FOS-Series operates within a process temperature range of -200°C to 250°C (-328°F to 482°F). The sensors deliver an accuracy of ±0.8°C (1.8°F) with a repeatability of 0.2°C in relative temperature measurements. Response time is up to 200 ms.

Key performance characteristics include:

  • Process Temperature Range: -200 to 250°C (-328 to 482°F)
  • Accuracy: ±0.8°C (1.8°F)
  • Repeatability: 0.2°C
  • Response Time: Up to 200 ms
  • Sensor Diameter: 1.6 mm (1/16")

The sensors do not require recalibration and maintain high stability over time.

Configuration Options

The series is available in two primary configurations distinguished by the sensor tip coating material:

  • FOS-LT-* Models: Feature a PTFE coated fiber optic sensor. Available lengths include 2, 3, 5, and 10 meters (e.g., FOS-LT-5).
  • FOS-LU-* Models: Feature a more durable polyimide material coating on the sensor tip. Available in matching length options.

All models utilize an ST Connector for electrical connection and are constructed with PTFE cable materials or Polyimide wetted parts depending on the model series. Cable extension accessories are available to complete the system, which requires a fiber optic monitor (not included).

Key Product Differences

The primary distinction within the FOS-Series lies in the sheath and tip coating materials:

  • FOS-LT Series: Utilizes PTFE for the cable material, suitable for general applications requiring EMI/RFI immunity.
  • FOS-LU Series: Incorporates a polyimide coated sensor tip designed to be more durable than standard coatings while maintaining the same measurement range and performance specifications.

Variants are differentiated by length, indicated in the model number (e.g., -2 for 2 meters, -10 for 10 meters). No other dimensional variations such as insertion depth or overall housing dimensions are specified beyond the probe diameter of 1.6 mm (1/16").

ko-KR
ko_KR
설정 저장