검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

XTA-W5R26-TJ

극한 온도 특수 열전대 프로브 및 리드 와이어 포함

  • Designed for extreme temperatures up to 2315 °C (4200 °F)
  • Options for Type R, S, B, C, or D thermocouples
  • Highly configurable for sheath material, wire gauge, probe length and diameter, and termination styles
  • Single or Dual element options available
XTA-W5R26-TJ
시작 1,023,036 원
극한 온도 특수 열전대 프로브 및 리드 와이어 포함 XTA-W5R26-TJ XTA-W5R26-TJ
loading all models
제품 개요
  • 케이블 길이 72 in
  • 보정 온도, 최소 0 °C
  • 색상 코드 표준 ANSI
  • 전기 연결 리드 제거
  • 단열 유리섬유
  • 접합부 유형 언그라운드
  • 커넥터 수 해당 없음
  • 최소 작동 온도 0 °C
  • 프로브 유형 극한 온도 특수 프로브
  • 최소 공정 온도 0 °C
  • 시리즈 ID XTA-W5R26-TJ
  • 보호관 재질 최소 온도 0 °C
  • 온도 센서 유형 열전쌍

Supported Applications

The Omega™ XTA exotic thermocouple probes with lead wire are designed for extreme-temperature measurement up to 2315 °C (4200 °F). They use either Platinum/Rhodium elements (Type R, S, or B) or Tungsten/Rhenium elements (Type C or D) with a range of insulation and sheath materials, and terminate in a transition joint (TJ) or RP-style lead for direct wiring into instrumentation. Depending on the sheath selected, probes serve inert, oxidizing, reducing, or vacuum conditions.

Because refractory metals are extremely sensitive to any trace of oxygen above approximately 260 °C (500 °F), the tungsten/rhenium sheath options must be used in vacuum or in very pure inert gases such as helium or argon.

Operating Conditions & Performance

The probes measure temperatures up to 2315 °C (4200 °F), with the maximum temperature of the final assembly set by the lowest-rated of the element, insulation, and sheath materials. All probes are ungrounded.

  • Element / calibration: Platinum/Rhodium (Type R, S, B) or Tungsten/Rhenium (Type C, D), via calibration codes such as W5R26, W3R25, P10R, P13R, and P30R.
  • Sheath materials: Tantalum, Molybdenum, Platinum-Rhodium alloy, or Inconel 600.
  • Sheath diameters: 0.062 in (1/16 in), 0.125 in (1/8 in), 0.187 in (3/16 in), and 0.250 in (1/4 in).
  • Media: vacuum, inert, oxidizing, or reducing atmospheres, per the selected sheath.

Dual-element assemblies provide two sensor readings for built-in backup or for sending signals to different instruments.

Configuration Options

Part numbers follow an ordering-guide breakdown of sheath-material code, calibration code, junction, sheath diameter, wire gauge, insulation code, termination style, length, and single/dual element. This lead-wire family uses the transition-joint and lead terminations:

  • Junction: ungrounded (U).
  • Termination styles: TJ (transition joint), RP, and related lead terminations (TJ-BX, TJ-SB).
  • Length: 1" to 48" in 0.5" increments (to 100" for selected constructions).
  • Element count: single or dual element.

Tungsten/rhenium probes can be tungsten-coated when required for additional protection.

Key Product Differences

The lead-wire series covers the platinum/rhodium and tungsten/rhenium calibrations across the sheath, diameter, and length options with transition-joint and RP terminations. Representative catalog numbers include:

  • XTA-W5R26-U-125-30-H-TJ-6
  • XTA-W5R26-U-125-30-H-TJ-18
  • XTA-W5R26-U-125-30-H-TJ-24

Specify sheath-material code, calibration, junction, sheath diameter, wire gauge, insulation, termination style, length, and single/dual element to define a complete probe.

ko-KR
ko_KR
설정 저장