한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
OM-CP-EVENT101A-Logger
이벤트 데이터 로거
- 티핑 버킷 우량계 및
- TTL 펄스, 접점 폐쇄 출력이 있는 기타 장치와 인터페이스
- 10년 배터리 수명
- 4 Hz 판독 속도
제품 개요
- 정확도 ± 한 달에 1분
- 정확도 세부 사항 20°C에서 ±1분/월, 독립형 데이터 로깅
- 배터리 수명 최대 10년까지입니다
- 배터리 크기 및 종류 3.6V 리튬 이온
- 전송 속도 115200
- 데이터 인터페이스 USB
- 표시 단위 °C, °F, ft/min, K/h, KTS, m/s, MPH
- 전기 연결 탈착식 나사 단자
- 높이 1.4 in
- 임피던스 입력 >60 kΩ
- 내부 약한 풀업 <60 μA
- LED 표시기 녹색 LED 깜박임: 로깅을 나타내는 10초 간격; 지연 시작 모드를 나타내는 15초 간격; 빨간색 LED 깜박임: 배터리 부족 및/또는 메모리 가득 참을 나타내는 10초 간격
- 길이 0.6 in
- 재료 ABS, 알루미늄
- 메모리 406,323개 판독값; 소프트웨어 구성 가능한 메모리 랩
- 메모리 모드 네
- 다중 시동/정지 모드 사양 참고 장치를 시작하려면: 푸시버튼을 5초간 누르고 있으면 이 동안 녹색 LED가 깜박입니다. 장치가 로깅을 시작했습니다. 장치를 중지하려면: 푸시버튼을 5초간 누르고 있으면 빨간색 LED가 3초간 깜박이고 그다음 녹색 LED가 2초간 깜박입니다. 장치가 로깅을 중지했습니다.
- 측정 횟수 1
- 작동 온도, 최대 80 °C
- 최소 작동 온도 -40 °C
- 보호 구성 옵션에 대한 접근을 제한하기 위해 선택적으로 비밀번호를 장치에 설정할 수 있습니다. 비밀번호 없이도 데이터를 읽을 수 있습니다.
- 실시간 기록 이 장치는 PC와 함께 사용하여 실시간으로 데이터를 모니터링하고 기록할 수 있습니다.
- 상대 습도 0~95% RH 비응축
- 해상도 4 Hz
- 응답 시간, 최소 10 µs
- 샘플, 최대 0.25초
- 샘플링 속도 4 Hz (초당 4회 업데이트)
- 시리즈 ID OM-CP-EVENT101A-Logger
- 소프트웨어 XP SP3/Vista/7 및 8 (32비트 및 64비트)
- 시작 모드 지연 시작, 즉각 시작, 버튼
- 정지 모드 매뉴얼 스튜드 소프트웨어, 정해진 날짜와 시간에
- 전원 유형 배터리
- 전압 입력 범위 0 ~ 30 vdc
- 무게 0.9 oz
- 폭 2.2 in
Supported Applications
The Omega OM-CP-EVENT101A is an event data logger designed for recording input transitions or contact closures from external sources. Documented applications include monitoring pulse state initiators such as gas, water, and electric meters.
Operating Conditions & Performance
The device operates in ambient temperatures of -40 to 80°C (-40 to 176°F) with a humidity rating of 0 to 95% RH non-condensing. It features an input range of 0 to +30V, distinguishing between Input Low (<0.4V) and Input High (>2.8V). The logger records events with a minimum active (low) time detection of 10 Microseconds and offers a reading rate selectable from 4 Hz down to once every 24 hours.
Time accuracy is specified as ±1 minute/month at 20°C (68°F) for stand-alone data logging. The unit stores up to 406,323 readings in non-volatile solid-state memory with configurable wrap-around capability. Power is supplied by a user-replaceable 3.6V lithium battery included with the device, providing a typical life of 10 years dependent upon frequency and duty cycle.
Configuration Options
The series supports various configuration options for connectivity, power maintenance, and environmental protection:
- Data Retrieval & Software: USB interface (cable required) at 115,200 baud; compatible with Windows XP SP3/Vista/7 and 8 (32 and 64-bit). The OM-CP-IFC200 accessory includes the software and a 1.8 m (6') USB cable.
- Enclosures: Standard ABS Plastic housing; optional NEMA 4 (IP65) weatherproof enclosure (OM-CP-WATERBOX101A) constructed of black anodized aluminum with dimensions of 74 H x 148 W x 39 mm D (2.9 x 5.8 x 1.5").
- Power & Maintenance: Replacement battery OM-CP-BAT105; maintenance kit OM-CP-WATERBOX101A-KIT for the waterbox enclosure.
- Configuration Features: Immediate start, delay start up to 18 months, and multiple pushbutton start/stop modes. Optional password protection restricts access to configuration options while allowing data readout without a password.
Key Product Differences
The OM-CP-EVENT101A is the base event data logger model within this series. The product family includes specific accessory models for interface connectivity (OM-CP-IFC200), battery replacement (OM-CP-BAT105), and environmental housing (OM-CP-WATERBOX101A). Engineering units can be scaled in software to display native measurement units or alternative types such as on/off, open/closed, or rainfall. The device includes LED indicators for logging status, delay start mode, low battery conditions, and full memory states.