India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
Series-DM-2000
DM-2000 Differential Pressure Transmitter for Air & Gases, 4-20 mA
DM-2000 공기 및 가스용 차압 트랜스미터, 4-20 mA- 제로 및 스팬 컨트롤은 쉬운 교정 점검과 장치 작동 및 모니터링을 위한 설치 시간 단축을 제공합니다
- 압력 변화에 대한 빠른 응답으로 중요한 상황에 대한 신호 및 경고 지연이 없습니다
- 읽기 쉬운 LCD 디스플레이는 즉각적인 현지 경고를 제공하여 문제 확산을 방지하기 위한 신속한 조치가 가능합니다
- Magnehelic과 동일한 크기로 설치 단계를 줄여 디지털 압력 게이지로 현장 업그레이드를 간소화합니다
- 설정의 우발적 변경을 방지하는 변조 방지 버튼 구성
Series-DM-2000
From
333,181
원
Product Overview
- 정확도 세부 사항 ± 1% FS, ± 30 Pa 모델 ± 4% FS 에서 70 °F
- 응용 분야 필터 모니터링, HVAC
- 디스플레이 노트 3.5자리 LCD, 0.7" 높이
- 디스플레이 유형 LCD
- 전기 연결 나사 단자
- 전기 출력 4 ~ 20 mA
- 장기 안정성 ± 1% FS/년
- 루프 저항 0~1250 Ω 최대값
- 접액부 재질 컨설트 팩토리
- 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, HVAC / 실내 공기, 비활성 가스/비반응성 가스
- 장착 사양 참고 수직 장착
- 표시 자릿수 3.5
- 와이어 수 2
- 작동 온도, 최대 48.9 °C
- 최소 작동 온도 -6.67 °C
- 출력 신호 현재
- 전력 소비 최대 38 mA
- 압력 유형 차동
- 프로세스 연결 크기 1/8인치
- 프로세스 연결 유형 호스 바브 피팅
- 증명압 최대 10 psi
- 시리즈 ID Series-DM-2000
- 스팬 조정 푸시 버튼
- 전원 유형 DC
- 공급 전압 10 ~ 35 Vdc
- 열 효과 ± 0.099% FS/°C
- 열 효과 사양 참고 ± 0.055% FS/°F (0.099% FS/°C), ± 30 Pa 모델 ± 0.13% FS/°F (0.234% FS/°C).
- 무게 136 g
- 제로 설정 조절 범위 디지털 푸시 버튼
Supported Applications
The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and non-combustible, compatible gases. The unit sends a standard 4-20 mA output signal for integration into control systems.
The housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® differential gage, facilitating replacement or upgrade scenarios where panel space is constrained.
Operating Conditions & Performance
The Series DM-2000 operates within an ambient temperature range of 20 to 120°F (-6.67 to 48.9°C). The pressure limit for the series is rated at 10 psig (0.69 bar).
Accuracy specifications vary by model: standard models offer ±1% FS, while the ±30 Pa model provides ±4% FS accuracy at 70°F. Long-term stability is specified as ±1% FS/yr.
The thermal effect on performance is documented as ±0.055% FS/°F (0.099% FS/°C) for standard models, and ±0.13% FS/°F (.234% FS/°C) for the ±30 Pa model.
Configuration Options
The series supports a wide range of factory-calibrated measurement ranges to address specific differential pressure needs:
- Inches water column: 0 to 0.1 in w.c., 0 to 0.25 in w.c., 0 to 0.5 in w.c., 0 to 1 in w.c., 0 to 2 in w.c., 0 to 3 in w.c., and 0 to 5 in w.c.
- Span ranges: 0.25 to 0.25 in w.c., 0.5 to 0.5 in w.c., and 0.05 to 0.20 in w.c.
- Pascal range: ±30 Pa
Electrical configuration requires a power supply of 10-35 VDC (2-wire) with a maximum loop resistance of DC: 0 to 1250 Ω. Current consumption is specified at DC: 38 mA maximum.
Housing and Connections
The transmitter features a glass filled plastic molded housing with pressure connections inherent to the design, utilizing 1/8" I.D. tubing for process connection. Electrical access is provided via a screw-type terminal block. The unit must be mounted in a vertical orientation.
Options and Accessories
The series offers several configurable options:
- LCD: Optional 3.5 digit LCD display (0.7" height) showing process and engineering units; allows field selection of 4 to 6 engineering units depending on range via a single push button.
- AT: Aluminum tag
- FC: Factory calibration certificate
- NIST: NIST traceable calibration certificate
Additional accessories include surface mounting brackets (A-299), flat flush mounting brackets (A-300), static pressure tips with flanges, instrument enclosures in ABS or 304 SS brushed finish, and a power supply converting 100-240 VAC/VDC to 24 VDC.
Key Product Differences
The Series DM-2000 is distinguished by its digital push-button zero and span adjustments, which simplify calibration compared to typical turn-potentiometers. Models are available with or without the optional LCD display; units equipped with the LCD allow for direct field viewing of pressure values in selectable engineering units.
PDFs & Manuals
Accessories
Static Pressure Sensors for Manometers & Gages across Air Filters
From $6.95
0 In Stock



