검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

FL-2500-Series

직접 판독 아크릴 가변 면적 유량계 키트

  • 읽기 설치가 간편한(툴리스 가능) 이중 영문 및 미터법 눈금
  • 6가지 일반 가스 및 물용 교체 가능한 눈금
  • 내장 니들 밸브 유무 선택 가능
  • 경제적이고 컴팩트함
FL-2500-Series
시작 188,862 원
직접 판독 아크릴 가변 면적 유량계 키트 FL-2500-Series FL-2500-Series
loading all models
제품 개요
  • 정확도 ± 5%
  • 미디어 호환성 정제 공정 / 냉각수, HVAC / 실내 공기, 비활성 가스/비반응성 가스
  • 장착 패널 장착
  • 최대 작동 압력 100 psi
  • 프로세스 연결 사양 참고 1⁄8 NPT 암나사 연결부, 내장 니들 밸브 및 씰 플러그, 황동 또는 스테인리스(모델에 따라 다름)
  • 프로세스 연결 크기 1/8인치
  • 프로세스 연결 유형 NPT 암나사
  • 공정 온도, 최대 65 °C
  • 규모 직접 읽기
  • 시리즈 ID FL-2500-Series

Supported Applications

The Omega FL-2500 Series consists of direct read acrylic variable area flow meter kits designed for visual flow rate measurement. These meters are intended for use in laboratories, schools, and industrial processes utilizing multiple gases or water. The series is explicitly not designed for patient-connected applications.

Operating Conditions & Performance

The FL-2500 Series operates with a maximum service temperature of 65°C (150°F) and a maximum pressure rating of 700 kPa (100 psig). Accuracy is specified as ±5% of full scale reading. The meters feature clear machined acrylic meter blocks that allow for direct visual monitoring of the float position.

Measurement ranges vary by model number, covering specific fluids including Air, Water, Argon, CO2, Helium, Nitrogen, and Oxygen. Available flow spans include:

  • Air: 1.4 SLM (2.8 SCFH) to 50 SLM (100 SCFH)
  • Water: 20 CCM (0.3 GPH) to 1400 CCM (22 GPH)
  • Argon: 1.1 SLM (2.25 SCFH) to 40 SLM (80 SCFH)
  • CO2: 1.1 SLM (2.5 SCFH) to 35 SLM (80 SCFH)
  • Helium: 2 SLM (4 SCFH) to 110 SLM (250 SCFH)
  • Nitrogen: 1.3 SLM (2.75 SCFH) to 45 SLM (100 SCFH)
  • Oxygen: 1.2 SLM (2.5 SCFH) to 45 SLM (90 SCFH)

Each kit includes seven interchangeable direct reading dual scales displaying both metric and English system units, with the air scale installed at shipment.

Configuration Options

The series offers configurable options for fittings, float materials, flow control integration, and sealing elements to match specific process requirements.

  • Fittings: Available in Brass or 316 Stainless Steel with ¼ NPT female connections. Models include built-in needle valves (indicated by the "-V" suffix) for flow regulation.
  • Float Materials: Options include Black glass, 316 Stainless steel (silver colored), and Tungsten Carbide (Carboloy - silver colored). Float selection is model-dependent based on fluid type and range.
  • O-Ring Seals: FKM seals are standard with stainless fittings; Buna seals accompany brass fittings. Optional O-rings include EPR.
  • Scales: Interchangeable scales for Air, Water, Argon, CO2, Helium, Nitrogen, and Oxygen allow a single meter block to measure multiple media by swapping the rear-mounted scale plate.

Key Product Differences

The FL-2500 Series is divided into two primary fitting families: Brass Fittings (FL-25xx) and Stainless Steel Fittings (FL-251x). Within each family, models are differentiated by flow range and float material. For example, the FL-2501/FL-2511 pair utilizes a glass float for lower ranges, while higher-range models such as FL-2503/FL-2513 employ Carboloy floats.

Models with built-in needle valves (e.g., FL-2501-V) provide integrated flow control compared to the standard meter-only versions. The series does not support NIST calibration on direct read meters, as noted in product documentation.

FL-25011234567-V
피팅 재질
범위(공기/물)
밸브 옵션
ko-KR
ko_KR
설정 저장