한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
TXDIN101-Transmitter
DIN 레일 범용 스마트 트랜스미터 LED 디스플레이 포함
재고가 있는 모델
- 고정밀
- 내장 LED 디스플레이
- 범용 입력: T/C, RTD 및 mV
- 갈바닉 절연
제품 개요
- 케이블 길이 1.5 m
- 데이터 인터페이스 USB
- 디스플레이 유형 LED
- 전기 연결 나사 단자
- 전기 출력 4 ~ 20 mA
- 외함 등급 IP20, UL94 V-0
- 높이 58 mm
- 길이 91 mm
- 재료 플라스틱 폴리카보네이트
- 장착 DIN 레일 장착
- 시리즈 ID TXDIN101-Transmitter
- 소프트웨어 COM 및 USB 포트를 위한 PC 소프트웨어 CONCAL
- 무게 85 g
- 폭 36 mm
Supported Applications
The Omega TXDIN101 is a DIN rail universal smart transmitter designed to convert various sensor inputs into a standardized process current loop. It accepts Thermocouple (T/C), Resistance Temperature Detector (RTD) configured as 2-, 3-, and 4-wire, Potentiometer (POT.), resistance ($\Omega$), and millivolt (mV) signals in single or differential modes.
The unit functions as a transmitter-monitor combination with an integral LED display visible in dark installations. It is engineered for applications requiring galvanically isolated two-wire transmission where the output current serves as both the signal and the light energy source for the display intensity.
Operating Conditions & Performance
The TXDIN101 utilizes a 24-bit A/D converter and dual microprocessors to achieve exceptional digital accuracy of typically $\pm$0.1°C for most sensors regardless of calibrated span. The device samples and updates the output current at a rate of 2 to 4 samples per second, depending on sensor type.
Key performance characteristics include:
- Cold Junction Compensation: Internal Pt-100 temperature sensor provides precise compensation throughout the entire ambient range.
- Fault Detection: Sensor breakage or input lead disconnection forces the output to a pre-defined up/down scale value. The unit automatically returns to normal operation when the sensor is recovered.
- Housing Protection: IP20 protection level with UL-94-V0 flame retardant rating in plastic polycarbonate housing.
Voltage and Power Specifications
The transmitter operates on a 13–36 Vdc power supply. The output signal is configurable as 4 to 20 mA, 20 to 4 mA, or any range within these limits. Output current clamping is set at 3.9 and 22 mA.
Configuration Options
The TXDIN101 series supports a wide envelope of configurable parameters stored in non-volatile memory via CONCAL software using COM or USB ports (CONUSB modem cord, length: 1.5 m). Configuration can be performed in dry mode without an external power source.
Configurable Parameters
- Sensor type and input range selection
- Connection type configuration for RTD (2-, 3-, or 4-wire) and differential modes
- Output offset, curve correction, and clamping factor
- Burnout type direction (up/down scale)
- Sensor calibration parameters
Electrical Connections
The unit features a 6-terminal screw connection block. Terminal assignments vary by input mode:
- RTD Inputs: Terminals 1 and 2 (2-wire); Terminals 1, 2, and 3 (3-wire); Terminals 1, 2, 3, and 4 (4-wire).
- Differential RTD/mV/T/C: Utilizes specific terminal pairings with differential symbols.
Mechanical Dimensions
The transmitter is housed in a plastic polycarbonate enclosure designed for standard DIN rail mounting. Overall dimensions are 36 W x 91 L x 58 mm D (1.4 x 3.6 x 2.3"). The unit weighs 85 g (0.18 lb) and can be mounted in any operating position.
Key Product Differences
The TXDIN101 is available as a single model family with specific accessory options to support installation and configuration:
- TXDIN101: DIN rail smart transmitter base unit.
- TX69-CABLE: Communication cable for PC programming.
- PSR-24-L: Regulated power supply, 24 Vdc, 400 mA with stripped leads (UL).
The series includes a special red filter provided for optimal view of the LED display. The product is certified to ISO 9001 and ISO 9002 standards.
소프트웨어 및 드라이버