Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
DRSL-U-Univ-Input-Sig-Cnd
DIN Rail Universal Input Signal Conditioner w/ Slim Housing
DIN 레일 범용 입력 신호 컨디셔너 슬림 하우징 포함- 범용 입력 – 열전대, RTD, 선형 저항, 가변 저항기, 전압 또는 전류 입력 허용
- DRSL-DISPLAY 프로그래밍 인터페이스 또는 전자 하드웨어 스위치를 사용하여 쉽게 구성 가능
- 슬림형 하우징 – 폭 6 mm(0.24인치)에 불과
- 고정밀
DRSL-U-Univ-Input-Sig-Cnd
From
467,870
원
Product Overview
- 승인 CE, UL, RoHS
- 최대 보정 온도 28 °C
- 보정 온도, 최소 20 °C
- 전기 출력 4 ~ 20 mA
- EMC 면역 사양 참고 NAMUR NE 21, A 기준, 버스트: <±1% 스팬 (스팬 = 선택된 입력 범위)
- EMC 표준 NAMUR NE 21
- 외함 등급 IP20
- 높이 113 mm
- 설치 오염 등급 2 및 측정/과전압 카테고리 II
- 고립 300 Vac
- LED 표시기 상태 LED: 녹색 LED는 장치 및 입력 센서의 작동 상태를 나타냄; 정상 작동: 13 Hz 주기로 15 ms 동안 깜박임; 센서 오류: 1 Hz 주기로 15 ms 동안 깜박임; 하드웨어 고장: LED 꺼짐
- 길이 115 mm
- 하중 저항 현재 출력: 20 mA/600 Ω/15 Vdc 최대, 전압 출력: >10 kΩ;
- 장착 DIN 레일 35 mm 표준, EN 60715
- 노이즈 보정 >60 dB
- 작동 온도, 최대 70 °C
- 최소 작동 온도 -25 °C
- 출력 값 과정
- 전력 소비 1.2W, 내부 - 최대 0.65W
- 상대 습도 0~95% RH(비응축)
- 스크류 단자 토크 0.5 Nm
- 시리즈 ID DRSL-U-Univ-Input-Sig-Cnd
- 안정성 부하 안정성: 스팬의 ≤0.01%/100 Ω
- 저장 온도, 최대 85 °C
- 보관 온도 최소 -40 °C
- 전원 유형 DC
- 온도 계수 사양 참고 모든 입력 유형: ≤± 0.01% 스팬/°C
- 무게 70 g
- 폭 6.1 mm
- 와이어 게이지 26부터 12 AWG
Supported Applications
The Omega DRSL-U is an isolated universal input DIN rail signal conditioner designed for the galvanic isolation of process signals to SCADA systems or PLC equipment. It accepts thermocouple, RTD, linear resistance, potentiometer, voltage, or current inputs and converts them to a linear voltage or current output. The unit eliminates ground loops, allowing for floating signal measurements.
Operating Conditions & Performance
The DRSL-U operates within an ambient temperature range of -25 to 70°C (-13 to 158°F) and a storage temperature of -40 to 85°C (-40 to 185°F). It is rated for humidity from 0 to 95% RH non-condensing with an enclosure rating of IP20. The device features excellent EMC performance with 50/60 Hz noise suppression.
Response time specifications are ≤1 s for Temperature Input (0 to 90%, 100 to 10%) and ≤400 ms for mA/V input (0 to 90%, 100 to 10%). Basic accuracy varies by input type, including ±0.2°C for Pt100 sensors, ±1.0°C for Thermocouple Types E, J, K, L, N, T, and U, and ±16 μA for mA inputs.
Measurement Ranges
The series supports the following documented input ranges:
- Thermocouples: Types J (-100 to 1200°C), K (-180 to 1372°C), T (-200 to 400°C), E (-100 to 1000°C), R and S (-50 to 1760°C), B (0 to 1820°C), N (-180 to 1300°C), L (-200 to 900°C), U (-200 to 600°C), W3/W5 (0 to 2300°C), and LR (-200 to 800°C).
- RTDs: Pt100 (-200 to 850°C) and Ni100 (-60 to 250°C).
- Linear Resistance/Potentiometer: 0 to 10,000 Ω or 10 to 100 kΩ.
- Voltage/Current: 0 to 12 V, 4 to 20 mA, and 0 to 20 mA inputs are supported with output options of 0 to 20 mA, 4 to 20 mA, or 0 to 10 Vdc.
Power & Load Specifications
The unit requires a power supply of 16.8 to 31.2 Vdc via power rail or connectors. The maximum load resistance is specified as 20 mA/600 Ω/15 Vdc max.
Configuration Options
The DRSL-U features a slimline housing with overall dimensions of 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5") and weighs approximately 70 g (0.15 lb). It utilizes screw terminals for electrical connections and is designed for DIN Rail Mounting.
Configuration is performed using the DRSL-DISPLAY programming interface, which plugs into a docking station adaptor. The device uses electronic hardware switches to set parameters without opening the enclosure or adjusting internal DIP-switches. The DRSL-DISPLAY features a 4 line LCD display with scrolling help text in English, French, German, Italian, Spanish, Danish, and Swedish.
Available Accessories
- DRSL-PWR-RAIL: Power rail (with cover and two end covers), 1 m length.
- DRSL-PCU: Power connector unit, 24 Vdc/2.5 A output to power rail.
- DRSL-MOD-STOP: Module stop for supporting mounted devices on the power rail.
Certifications & Warranty
The series carries CE, UL, cUL, and RoHS approvals. A 1 YEAR WARRANTY is included, with an OMEGACARE™ extended warranty program available covering parts, labor, and equivalent loaners.
Key Product Differences
The primary model in this series is the DRSL-U (Isolated universal input signal conditioner). Configuration requires separate ordering of the DRSL-DISPLAY interface and the DRSL-ADAPTOR docking station. The device supports multiple sensor families including Thermocouple, RTD, Linear Resistance, Potentiometer, Voltage, and Current inputs within a single isolated housing.
PDFs & Manuals