한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
DRSL-TC-Srs-Sig-Cond
DIN 레일 열전대 입력 신호 컨디셔너 | 저프로파일
재고가 있는 모델
- DRSL-TC 비절연 및 DRSL-TC-ISO 절연 모델
- J형 및 K형 열전대 수용
- 딥스위치로 선택 가능한 사전 교정 온도 범위
- 슬림라인 하우징—폭 6 mm (0.24')에 불과
제품 개요
- 승인 CE, UL, RoHS
- 최대 보정 온도 28 °C
- 보정 온도, 최소 20 °C
- 전기 출력 4 ~ 20 mA
- EMC 면역 사양 참고 NAMUR NE 21, A 기준, 버스트: <±1% 스팬 (스팬 = 선택된 입력 범위)
- EMC 표준 NAMUR NE 21
- 외함 등급 IP20
- 높이 113 mm
- 설치 오염 등급 2 및 측정/과전압 카테고리 II
- LED 표시기 녹색 LED는 장치 및 입력 센서의 작동 상태를 나타냅니다
- 길이 115 mm
- 하중 저항 전압 출력 : >10 kΩ 최소,; 전류 출력 : 21 mA/600 Ω /12.6V 최대
- 장착 DIN 레일 35 mm 표준, EN 60715
- 작동 온도, 최대 70 °C
- 최소 작동 온도 -25 °C
- 출력 값 과정
- 전력 소비 0.7와트, 내부 - 0.65와트
- 상대 습도 0~95% RH(비응축)
- 스크류 단자 토크 0.5 Nm
- 시리즈 ID DRSL-TC-Srs-Sig-Cond
- 안정성 부하 안정성: 스팬의 ≤0.01%/100 Ω
- 저장 온도, 최대 85 °C
- 보관 온도 최소 -40 °C
- 전원 유형 DC
- 무게 70 g
- 폭 6.1 mm
- 와이어 게이지 26부터 12 AWG
Supported Applications
The Omega DRSL-TC Series consists of low-profile DIN rail signal conditioners designed to interface thermocouple inputs with SCADA systems or PLC equipment. The series accepts Type J and K thermocouples, converting them into unipolar analog signals suitable for data acquisition applications.
Operating Conditions & Performance
The DRSL-TC Series operates within an ambient temperature range of -25 to 70°C (-13 to 158°F) and supports storage temperatures from -40 to 85°C (-40 to 185°F). Humidity ratings are specified as 0 to 95% RH non-condensing. Accuracy performance varies by model: the DRSL-TC provides better than 1.0°C or ±0.1% of selected input range, while the DRSL-TC-ISO offers better than 0.5°C or ±0.05% of selected input range.
Measurement ranges cover Type J from -100 to 1200°C (-148 to 2192°F) and Type K from -180 to 1372°C (-292 to 2501°F). Response time is selectable at <30 ms or 300 ms. The units carry CE, UL US, and RoHS approvals.
Configuration Options
The series includes two primary configurations: the DRSL-TC (non-isolated) and the DRSL-TC-ISO (isolated). Configuration is performed via DIP-switches with over 1000 factory-calibrated measurement ranges available. The slimline housing measures only 6 mm (0.24") wide, with overall dimensions of 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5").
Available output signals include:
- Current Output: 0 to 20 mA and 4 to 20 mA
- Voltage Output: 0 to 10V, 2 to 10V, 0 to 5V and 1 to 5V
Power supply requirements are 16.8 to 31.2 Vdc via connectors for the DRSL-TC; the DRSL-TC-ISO accepts 16.8 to 31.2 Vdc via power rail or connectors. Electrical connections utilize screw terminals compatible with wire sizes from 0.13 x 2.5 mm² / AWG 26 to 12 stranded wire.
Accessories for the series include:
- DRSL-PWR-RAIL: Power rail (with cover and two end covers), 1 m length, for use with DRSL-TC-ISO only
- DRSL-PCU: Power connector unit, 24 Vdc/2.5 A output to power rail, for use with DRSL-TC-ISO only
- DRSL-MOD-STOP: Module stop screwed onto the power rail to support mounted devices
Key Product Differences
The series distinguishes between two model families based on isolation and surge suppression capabilities:
- DRSL-TC: Non-isolated thermocouple input DIN rail signal conditioner.
- DRSL-TC-ISO: Isolated thermocouple input DIN rail signal conditioner featuring 3-way isolation and surge suppression. This model supports power via the optional DRSL-PWR-RAIL system in addition to direct connectors.
액세서리
installation hardware
Module stop (screwed onto DIN rail to support and hold mounted devices)
13,612원 / 개당
0 재고 있음