한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
DRSL-TEMP-Sig-Cond
DIN 레일 온도 루프 전원 신호 컨디셔너
재고가 있는 모델
- J형 또는 K형 열전대 또는 2, 3, 4선식 Pt100 RTD 입력
- 호스트(출력) 전류 신호 루프 전원 공급
- 슬림라인 6 mm (0.24') 하우징
- 고정밀
제품 개요
- 승인 CE, UL, RoHS
- 최대 보정 온도 28 °C
- 보정 온도, 최소 20 °C
- 전기 출력 4 ~ 20 mA
- EMC 면역 사양 참고 NAMUR NE 21, A 기준, 버스트: <±1% 스팬 (스팬 = 선택된 입력 범위)
- EMC 표준 NAMUR NE 21
- 외함 등급 IP20
- 높이 113 mm
- 설치 오염 등급 2 및 측정/과전압 카테고리 II
- 고립 300 Vac
- 길이 115 mm
- 하중 저항 저항: ≤(Vsupply - 5.5)/0.023
- 장착 DIN 레일 35 mm 표준, EN 60715
- 노이즈 보정 >60 dB
- 작동 온도, 최대 70 °C
- 최소 작동 온도 -25 °C
- 출력 값 과정
- 전력 소비 0.7 W
- 상대 습도 0~95% RH(비응축)
- RTD 정확도 ± 0.05 %
- 스크류 단자 토크 0.5 Nm
- 시리즈 ID DRSL-TEMP-Sig-Cond
- 안정성 부하 안정성: 스팬의 ≤0.01%/100 Ω
- 저장 온도, 최대 85 °C
- 보관 온도 최소 -40 °C
- 전원 유형 DC
- 전압 손실 5.5 Vdc
- 무게 70 g
- 폭 6.1 mm
- 와이어 게이지 26부터 12 AWG
Supported Applications
The Omega DRSL-TEMP series consists of isolated, DIN rail-mounted temperature signal conditioners designed for industrial process environments. These modules accept standard Type J or K thermocouple inputs and 2-, 3-, or 4-wire Pt100 RTD sensors to provide a passive analog current output signal. The units are engineered with surge suppression and protection against transients and noise, making them suitable for applications requiring reliable temperature monitoring in electrically noisy environments.
Operating Conditions & Performance
The DRSL-TEMP operates within an ambient temperature range of -25 to 70°C (-13 to 158°F) and can be stored between -40 to 85°C (-40 to 185°F). Relative humidity must remain at 0 to 95% RH non-condensing. The device is rated for altitudes up to 2000 m.
Measurement capabilities include:
- Type J thermocouple: -100 to 1200°C (-148 to 2192°F)
- Type K thermocouple: -180 to 1372°C (-292 to 2501°F)
- Pt100 RTD: -200 to 850°C (-328 to 1562°F)
Accuracy is specified as better than 0.5°C or ±0.05% of span (selected input range) for thermocouple inputs, and better than 0.1°C or ±0.05% of span for RTD inputs. Response time is selectable at <30 ms/300 ms.
Configuration Options
The series supports configuration via DIP switches to select from over 1,000 factory-calibrated measurement ranges. The unit features a plastic housing with an IP20 protection degree and mounts directly onto a standard DIN rail (EN 60715) without requiring an air gap.
Power & Isolation
The DRSL-TEMP is loop-powered, drawing power from the host output current signal. It operates on a supply voltage of 5.5 to 35 Vdc with maximum consumption of 0.7 W. The design includes 2-way isolation between input and output.
Output & Connections
The module provides an analog current output configurable for 0 to 20 mA or 4 to 20 mA signals. Electrical connections are made via screw terminals using only 60/75°C copper conductors. The load resistance is defined as ≤(V_supply - 5.5)/0.023 Ω.
Approvals & Safety
The device complies with CE, UL US (UL 61010-1), and RoHS standards. It meets EMC directive 2004/108/EC (EN 61326-1) and LVD directive 2006/95/EC (EN 61010-1). Safe isolation is certified to EN 61140, with reinforced isolation spanning test values of 2.5 kVAC / working voltage of 300 VAC.
Key Product Differences
The primary model in this series is the DRSL-TEMP isolated DIN rail loop-powered temperature signal conditioner. While broader family documentation references additional variants such as DRS-L-TC, DRS-L-RTD, and non-loop powered versions (DRS-L-TEMP), the specific data sheet for this series focuses on the loop-powered configuration with Pt100 RTD and Type J/K thermocouple inputs.
Available accessories include:
- RAIL-35-1: 35 mm (1.4") DIN rail, 1 m (3.3') length
- DRSL-MOD-STOP: Module stop screwed onto the DIN rail to support and hold mounted devices
액세서리
installation hardware
Module stop (screwed onto DIN rail to support and hold mounted devices)
13,612원 / 개당
0 재고 있음