한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
TXDIN1600S-Transmitter
DIN 레일 스트레인 게이지/로드셀 트랜스미터, 양극성 mA/V 출력 포함
재고가 있는 모델
- 로드셀/스트레인 게이지 응용에 적합
- 범용 전류, 양극성 전압 출력
- 입력 범위 0.2 ~ 7.5 MV/V, 5 V 구동 전압
- 10~32 Vac 또는 10~48 Vdc 전원 공급
제품 개요
- 승인 CE
- 승인 사양 참고 CE: BS EN 61326
- 전송 속도 19200
- 보정 교정 스케일링: 공정 대비 2~6점 신호; 활성 교정: 실제 로드셀 기반 교정
- 데이터 인터페이스 USB
- 디스플레이 유형 LED
- 드리프트 < ± 0.05 %
- 전기 출력 0 ~ 21.5 mA
- 외함 등급 IP65
- 여기 전류 59 mA
- 필터 최종 값의 70%에 도달하는 데 1~20초 걸림
- 높이 90 mm
- 고립 500 Vdc
- LED 표시기 출력이 -0.1~100.1%일 때 녹색 LED, 그 외에는 적색
- 길이 56.4 mm
- 재료 폴리이미드 6.6
- 장착 DIN 레일 43880, 회색
- 오프셋 타레 입력 유형 - 원격 무전압 접촉, 최대 10미터 거리
- 작동 온도, 최대 70 °C
- 최소 작동 온도 -30 °C
- 출력 값 과정
- 상대 습도 10~90%RH (비응축)
- 시리즈 ID TXDIN1600S-Transmitter
- 쉘 색상 회색
- 소프트웨어 Windows PC 소프트웨어
- 전원 유형 AC / DC
- 업데이트 속도 10 또는 80 SPS
- 무게 70 g
- 폭 17.5 mm
Supported Applications
The Omega TXDIN1600S is a smart powered bridge amplifier designed for strain gauge and load cell signal conditioning. It functions as a DIN rail mount transmitter that scales input signals to process values, supporting applications requiring voltage or current re-transmission of sensor data.
Operating Conditions & Performance
The TXDIN1600S operates with an ambient temperature range of -30 to 70°C (-22 to 158°F) and a storage ambient range of -30 to 70°C (-22 to 158°F). Configuration is specified for an ambient environment of 10 to 30°C (50 to 86°F). The device maintains operation within a humidity rating of 10 to 90% RH (non condensing) and features an enclosure protection level of IP65.
Performance specifications include bridge input linearity of ± 0.01% and drift less than ± 0.05%. The device utilizes ratio metric measurement for high stability with a sample rate selectable at 10 or 80 SPS (samples per second). Output accuracy is defined as (mA out/2000) or 5 µA whichever is the greater, with a drift of 1 µA/°C. Voltage output accuracy is ± 5 mV.
Measurement and Signal Parameters
- Bridge Input: -7.6 to 7.6 mV/V (-38 to 38) mV at 5V excitation; Four wire radimetric type.
- Bridge Excitation: 5 Volts DC ± 0.1 V @ 59 mA, supporting total bridge impedance from 85 to 10000 Ω (operates with four 350 Ω cell in parallel).
- Response Time: Filter selectable from 1 to 20 seconds to reach 70% of final value.
Configuration Options
The TXDIN1600S series supports configurable output signals, calibration scaling, and user interface options. The device is housed in a DIN rail enclosure (style DIN 43880) constructed from Polyimide 6.6 with dimensions of 56.4 mm width x 90 mm height x 17.5 mm depth.
Output Signal Options
- Current Source: Range (0 to 21.5) mA, max load 750 Ω.
- Current Sink: Range 0 to 21.5 mA, supply 10 to 30 Vdc, voltage effect 0.2 µA/V.
- Voltage Output: 0 to 10.1 V or -10.1 to 10.1 V with ± 2 mA current drive and min load 5000 Ω @ 10 V.
User Interface & Configuration
- Calibration: Supports (2 to 6) points signal against process scaling, including active calibration against live load cell and remote set tare offset with programmable user set point.
- Front Panel: Independent “Low” and “High” push buttons allow manual setting of low and high output points. LED indication shows green when output is -0.1 to 100.1%, red otherwise.
- Digital Interface: USB 2.0 at 19,200 baud for PC running Windows XP or later; supports process units (4 characters) and tag number (20 characters).
Power & Electrical Connections
- Supply: 10 to 48 Vdc, 10 to 32 Vac protected by internal 500 mA resettable fuse; power consumption < 1 W full power.
- Isolation: Supply to input to output 500 Vdc.
- Tare Input: Remote volt free contact, up to 10 meter distance.
- Terminals: Screw terminals accepting wire size maximum 2.5 mm (0.10").
Key Product Differences
The TXDIN1600S is a single model family designated as the DIN-rail mount load-cell transmitter. If configuration is not specified at the time of order, the product ships with default settings: 2 mV/V input and 4 to 20 mA output range.
소프트웨어 및 드라이버