검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

DRSL-DC3-Process-Sig-Cond

프로세스 입력용 DIN 레일 신호 컨디셔너 시리즈

재고가 있는 모델
  • 프로세스 전압 또는 전류 신호의 절연 및 변환
  • 슬림라인 하우징—폭 6 mm (0.24')에 불과
  • 다중 신호 범위 (DIP 스위치 선택 가능)
  • 고정밀도, 스팬의 0.2% 미만
DRSL-DC3-Process-Sig-Cond
시작 374,534 원
재고가 있는 모델
프로세스 입력용 DIN 레일 신호 컨디셔너 시리즈 DRSL-DC3-Process-Sig-Cond DRSL-DC3-Process-Sig-Cond
loading all models
제품 개요
  • 승인 CE, UL, RoHS
  • 최대 보정 온도 28 °C
  • 보정 온도, 최소 20 °C
  • 전기 출력 0 ~ 20.5 mA
  • EMC 면역 사양 참고 확장 EMC 내성 NAMUR NE 21, A 기준, 버스트: <±1% 스팬
  • EMC 표준 NAMUR NE 21
  • 외함 등급 IP20
  • 높이 113 mm
  • 설치 오염 등급 2 및 측정/과전압 카테고리 II
  • 고립 300 Vac
  • 길이 115 mm
  • 하중 저항 현재 출력: 23 mA/600 Ω 최대, 전압 출력: >10 kΩ 최소
  • 장착 DIN 레일 35 mm 표준, EN 60715
  • MTBF 249년
  • 노이즈 보정 >60 dB
  • 작동 온도, 최대 70 °C
  • 최소 작동 온도 -25 °C
  • 출력 값 과정
  • 전력 소비 0.8W, 내부 - 최대 0.65W
  • 상대 습도 0~95% RH(비응축)
  • 스크류 단자 토크 0.5 Nm
  • 시리즈 ID DRSL-DC3-Process-Sig-Cond
  • 스팬 최대 현재 선택된 DIP 스위치 출력 범위에 해당
  • 안정성 부하 안정성: 스팬의 ≤0.01%/100 Ω
  • 저장 온도, 최대 85 °C
  • 보관 온도 최소 -40 °C
  • 전원 유형 DC
  • 무게 70 g
  • 폭 6.1 mm
  • 와이어 게이지 26부터 13 AWG

Supported Applications

The Omega DRSL-DC3 is an isolated DIN rail signal conditioner designed for the galvanic isolation and conversion of process voltage or current signals. The series supports interfacing with SCADA systems or PLC equipment, providing surge suppression and eliminating ground loops in industrial control environments.

Operating Conditions & Performance

The DRSL-DC3 operates within an ambient temperature range of -25 to 70°C (-13 to 158°F) with a storage temperature capability from -40 to 85°C (-40 to 185°F). Humidity ratings are specified as 0 to 95% RH non-condensing. The unit delivers an accuracy of <±0.2% of span and features a response time of <7 ms (0 to 90%, 100 to 10%). It is rated for IP20 enclosure protection.

Measurement Ranges

The series supports the following input measurement ranges:

  • Current: 0 to 20.5 mA, 0 to 23 mA
  • Voltage: 0 to 10.25 V, 0 to 11.5 V, 0 to 5.75 V, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V

Output Signals

Selectable output signals include:

  • Current: 0 to 20.5 mA, 0 to 20 mA, 4 to 20 mA
  • Voltage: 0 to 10 V, 2 to 10 V, 0 to 5 V, 1 to 5 V

Electrical Load Requirements

The load resistance specifications are:

  • Current output: 23 mA/600 Ω max
  • Voltage output: >10 kΩ min

Configuration Options

The DRSL-DC3 features a slimline housing with overall dimensions of 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5"). The unit weighs approximately 70 g (0.15 lb). Signal ranges are selectable via DIP switches, and the device mounts to a DIN rail without an air gap using screw terminals.

Power Supply

The series requires a power supply of 16.8 to 31.2 Vdc provided via Power Rail or Connectors (terminals 7-8).

Accessories and Options

Available accessories for the DRSL-DC3 include:

  • DRSL-PWR-RAIL: Power rail with cover, two end covers (one right hand, one left hand), 1 m (3.3') length.
  • DRSL-PCU: Power connector unit providing 24 Vdc/2.5 A output to the power rail.
  • DRSL-MOD-STOP: Module stop screwed onto the power rail to support and hold mounted devices.

Certifications and Warranty

The series carries CE, UL US, and RoHS certifications. A 1 YEAR WARRANTY is provided with the unit.

Key Product Differences

The DRSL-DC3 model represents an isolated DIN rail signal conditioner within this series. The primary variation across the product line involves the selectable input/output ranges configured via DIP switches to match specific process voltage or current signals, rather than distinct physical housing variants.

액세서리

installation hardware

Module stop (screwed onto DIN rail to support and hold mounted devices)
13,612원 / 개당
0 재고 있음
ko-KR
ko_KR
설정 저장