검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

DRA-RTT-2-Sig-Cond

DIN 레일 루프 전원 RTD 입력 신호 컨디셔너

재고가 있는 모델
  • ±0.1% 정확도
  • 선형화
  • 현장 조정 가능
  • 비절연형
DRA-RTT-2-Sig-Cond
시작 262,272 원
재고가 있는 모델
DIN 레일 루프 전원 RTD 입력 신호 컨디셔너 DRA-RTT-2-Sig-Cond DRA-RTT-2-Sig-Cond
loading all models
제품 개요
  • 전기 출력 4 ~ 20 mA
  • 외함 등급 IP20, IP40
  • 여기 전류 < 1 mA
  • 높이 90 mm
  • 고립 없음
  • 납 보상 오류 < ±0.03% 스팬 전체 변화에 대해
  • 길이 58 mm
  • 루프 저항 Rmax (Ω) = (Vsupply - 10)/0.02
  • 재료 폴리카보네이트
  • 장착 DIN 레일 35 mm 표준
  • 작동 온도, 최대 70 °C
  • 최소 작동 온도 -20 °C
  • 출력 값 과정
  • 상대 습도 5~95% RH, 비응축
  • 저항 허용오차 < ±0.05°C/10 Ω 리드 저항
  • 시리즈 ID DRA-RTT-2-Sig-Cond
  • 저장 온도, 최대 85 °C
  • 보관 온도 최소 -30 °C
  • 전원 유형 DC
  • 온도 안정성 <±0.015% 스팬/°C
  • 무게 70 g
  • 폭 17.5 mm
  • 제로 설정 조절 범위 -55~202°C

Supported Applications

The Omega DRA-RTT-2 is a non-isolated signal conditioner designed for temperature measurement and signal transmission. It accepts a 3-wire Pt 100 RTD input (a = 0.00385, according to DIN 43760/BS1904) and converts this into a linearly proportional 4 to 20 mA process current output.

Field ranging is accomplished using an internal DIP switch array for coarse range setting and front panel accessible multi-turn zero and span potentiometers for fine tuning. Test terminals are provided to monitor the transmitter's 4 to 20 mA output without disturbing the actual process loop.

Operating Conditions & Performance

The DRA-RTT-2 operates within an ambient temperature range of -20 to 70°C (-4 to 158°F) with a humidity rating of 5 to 95% RH. The device is housed in polycarbonate providing IP40 protection, while the terminal housing offers IP20 protection.

Performance specifications include an accuracy of ±0.1% of span (including linearity, hysteresis and repeatability) and temperature stability of < ±0.015% of span/°C. The sensor excitation is maintained at < 1 mA to minimize self-heating effects.

Input configuration supports the following ranges:

  • Zero Range (Tmin): -55 to 202°C (-67 to 395°F)
  • Span Range (Tspan): 30 to 810°C (86 to 1490°F)

The device requires a loop power supply of 10 to 36 Vdc. Supply variation effect is < ±0.03% of span for full change.

Configuration Options

The DRA-RTT-2 series supports specific configuration options and accessories:

  • Mounting: 35 mm DIN rail mounting is standard, with overall dimensions of 90 H x 17.5 W x 58 mm D (3.54 x 0.7 x 2.28").
  • Ranging Configuration: Three "zero" DIP switches and three "span" DIP switches allow for coarse selection of the input range, supplemented by two fine-tuning potentiometers.
  • Power Supply Option: The iDRN-PS-1000 power supply is available (95 to 240 Vac input, 24 Vdc @ 1 A output).
  • Warranty: OMEGACARE™ Extended Warranty Program options are offered.

The unit weighs 70 g (2.5 oz). Storage temperature range is -30 to 85°C (-22 to 185°F).

Key Product Differences

The DRA-RTT-2 model number identifies the non-isolated RTD input signal conditioner configuration. The series does not include isolated variants in this specific data sheet scope.

ko-KR
ko_KR
설정 저장