검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

DRSL-DC1-DC2-Srs-Sig-Cond

프로세스 입력, 고정밀 DIN 레일 컨디셔너 시리즈

재고가 있는 모델
  • 프로세스 전압 또는 전류 신호의 절연 및 변환
  • 2선식 트랜스미터용 전원 공급 및 신호 절연기
  • 슬림라인 하우징—폭 6 mm (0.24')에 불과
  • 다중 신호 범위 (DIP 스위치 선택 가능)
DRSL-DC1-DC2-Srs-Sig-Cond
시작 422,415 원
재고가 있는 모델
프로세스 입력, 고정밀 DIN 레일 컨디셔너 시리즈 DRSL-DC1-DC2-Srs-Sig-Cond DRSL-DC1-DC2-Srs-Sig-Cond
loading all models
제품 개요
  • 정확도 ± 0.05%
  • 승인 CE, UL, RoHS
  • 최대 보정 온도 28 °C
  • 보정 온도, 최소 20 °C
  • 전환율 1:1
  • 전류 측정 범위 0 ~ 20.5 mA
  • 전기 출력 0 ~ 20.5 mA
  • EMC 면역 사양 참고 확장 EMC 내성 NAMUR NE 21, A 기준, 버스트: <±1% 스팬
  • EMC 표준 NAMUR NE 21
  • 외함 등급 IP20
  • 높이 113 mm
  • 설치 오염 등급 2 및 측정/과전압 카테고리 II
  • 길이 115 mm
  • 하중 저항 현재 출력: 23 mA/600 Ω 최대
  • 장착 DIN 레일 35 mm 표준, EN 60715
  • MTBF 284년
  • 노이즈 보정 >60 dB
  • 작동 온도, 최대 70 °C
  • 최소 작동 온도 -25 °C
  • 출력 값 과정
  • 상대 습도 0~95% RH(비응축)
  • 응답 시간 < 7 ms
  • 응답 시간 사양 참고 응답 시간 (0~90%, 100~10%): <7 ms
  • 스크류 단자 토크 0.5 Nm
  • 시리즈 ID DRSL-DC1-DC2-Srs-Sig-Cond
  • 안정성 부하 안정성: 스팬의 ≤0.01%/100 Ω
  • 저장 온도, 최대 85 °C
  • 보관 온도 최소 -40 °C
  • 전원 유형 DC
  • 공급 전압 16.8 ~ 31.2 Vdc
  • 온도 계수 <±0.01% 스팬/°C
  • 무게 70 g
  • 폭 6.1 mm
  • 와이어 게이지 26부터 12 AWG

Supported Applications

The Omega DRSL series comprises isolated DIN rail signal conditioners designed for the galvanic isolation and conversion of process voltage or current signals. These units interface field instrumentation with SCADA systems or PLC equipment, providing surge suppression and eliminating ground loops in industrial control environments.

Operating Conditions & Performance

The series delivers high accuracy performance rated at <±0.05% of span with a temperature coefficient of <±0.01% of span/°C. Signal response time is specified as <7 ms (0 to 90%, 100 to 10%). The units operate within an ambient temperature range of -25 to 70°C (-13 to 158°F) and a storage temperature range of -40 to 85°C (-40 to 185°F). Relative humidity tolerance is rated at 0 to 95% RH non-condensing. The enclosure carries an IP20 protection degree, suitable for Pollution Degree 2 and Measurement/Overvoltage Category II installation areas.

Electrical isolation separates input, output, and supply circuits with a working voltage of 300 Vac and a test voltage of 2.5 kVac. The signal-to-noise ratio exceeds 60 dB. EMC immunity influence is rated at <±0.5% of span, meeting NAMUR NE 21 A Criterion for extended immunity (Burst: <±1% of span).

Input and Output Specifications

The series supports configurable measurement ranges via DIP-switch selection:

  • Current Input: Measurement range up to 0 to 20.5 mA; functional range 0 to 23 mA. Programmable ranges include 0 to 20 mA and 4 to 20 mA.
  • Voltage Input: Measurement range up to 0 to 10.25 V; functional range includes 0 to 11.5 V or 0 to 5.75 V depending on configuration. Programmable ranges include 0 to 5 V, 1 to 5 V, 0 to 10 V, and 2 to 10 V.
  • Current Output: Signal range up to 0 to 20.5 mA (span); programmable for 0 to 20 mA or 4 to 20 mA with a maximum load of 600 Ω at 23 mA and current limit ≤28 mA.
  • Voltage Output: Signal range up to 0 to 10 V; programmable for 0 to 10, 2 to 10, 0 to 5, or 1 to 5 V with a minimum load of >10 kΩ.

The unit provides power supply capability for 2-wire transmitters at >17V/20 mA. Power consumption is 1.2 W max (internal consumption 0.4 W typical / 0.65 W max).

Power and Isolation

The series operates on a power supply of 16.8 to 31.2 Vdc, delivered via Power Rail or connectors.

Configuration Options

The DRSL-DC2 model is the primary isolated DIN rail signal conditioner in this series. The slimline housing measures 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5") and weighs approximately 70 g (0.15 lb). Mounting is designed for DIN EN 60715 - 35 mm rails.

Electrical connections utilize screw terminals compatible with stranded wire sizes from 0.13 to 2.5 mm² / AWG 26 to 12, requiring a torque of 0.5 Nm for secure termination.

Available Accessories

The series supports the following optional accessories for installation and power distribution:
  • DRSL-PWR-RAIL: Power rail with cover and two end covers (one right hand, one left hand), 1 m (3.3') length.
  • DRSL-PCU: Power connector unit providing 24 Vdc/2.5 A output to the power rail.
  • DRSL-MOD-STOP: Module stop screwed onto the power rail to support and hold mounted devices.

Certifications and Warranty

The series carries CE, UL cUL US, and RoHS certifications. A 1-year warranty is standard; an OMEGACARE™ extended warranty program is available for models shown on this page.

Key Product Differences

The bundle enumerates two variants within the series: DRSL-DC1 and DRSL-DC2. The detailed specifications provided in the source data sheet apply to the DRSL-DC2 model, described as an isolated DIN rail signal conditioner.

액세서리

installation hardware

Module stop (screwed onto DIN rail to support and hold mounted devices)
13,612원 / 개당
0 재고 있음
ko-KR
ko_KR
설정 저장