日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
PTC-16-A-Timer
DINマウントデジタルタイマー 2リレー出力付き
DIN 마운트 디지털 타이머 2 릴레이 출력 포함
在庫のあるモデル
- 4자리 백라이트 LCD 디스플레이 디지털 타이머
- 24가지 프로그래밍 가능한 타이밍 모드
- 0-9999초 또는 0-9999분 시간 범위
- 24~240V AC/DC 전원 공급
製品の概要
- 정확도 ±3초/24시간
- 접촉 평점 OP1 8 A 250 Vac/30 Vdc(저항성), OP2 8 A 250 Vac/30 Vdc(저항성)
- 제어 출력 단극 전환 접촉 및 단극 N/O 접촉
- 전기 수명 100,000회 동작
- 외함 등급 IP20
- 인클로저 유형 DIN 43700에 패널 장착, 자기 소화 플라스틱 케이스, 플러그 인 연결 단자
- 폼팩터 DIN 레일
- 빈도 50/60 Hz
- 높이 90 mm
- 길이 65 mm
- 릴레이 수 2
- 작동 온도, 최대 45 °C
- 최소 작동 온도 -5 °C
- 전력 소비 3 VA
- 리셋 ~100 ms
- 시리즈 ID PTC-16-A-Timer
- 저장 온도, 최대 55 °C
- 보관 온도 최소 -10 °C
- 전원 유형 에어컨
- 공급 전압 24 ~ 240 교류 전압 (AC)
- 타이머 범위 0 ~ 9999초, 0 ~ 99999분
- 무게 140 g
- 폭 36 mm
Supported Applications
The Omega PTC-16-A is a multifunction digital timer designed for controlling equipment, machinery, systems, or processes in industrial applications. It provides timing control via two relay outputs and features a backlit LCD display with front-panel programming keys.
Operating Conditions & Performance
The PTC-16-A operates on a power supply of 24 to 240Vac/dc at 50/60Hz, consuming less than 3VA. It is rated for an ambient operating temperature range of -5°C to +45°C and storage temperatures from -10°C to +55°C. The device carries an IP20 protection class rating and is designed for installation heights up to a maximum of 2000m.
Timing accuracy is specified as ±3sec/24hours across measurement ranges of 0-9999 seconds or 0-9999 minutes. The relay reset time is approximately 100ms, and the device utilizes EEPROM memory with a minimum data retention period of 10 years.
Configuration Options
The series supports DIN rail mounting in a compact housing measuring 36mm wide x 90mm high x 65mm deep (approximately 140g). The enclosure is constructed from self-extinguishing plastics and includes a clear hinged tamperproof cover.
Outputs & Connections
- R1 Output: Single pole changeover contact, rated at 8A at 240Vac (resistive load).
- R2 Output: Single pole N/O contact, rated at 8A at 240Vac (resistive load).
- Contact Life: Mechanical life of 1,000,000 operations; electrical life of 100,000 operations.
- Electrical Connection: Plug-in connection terminals compatible with 2mm² screw type wiring.
Timing Modes & Display
The timer offers 24 programmable timing modes accessible via front keys (MENU, OK, ▲, ▼). The display indicates start mode (On/Off/S pulse), output relay status, selected relay (R1/R2), run time value, setpoint time value, and the active timing function. Indicators distinguish between seconds (sec) or minutes (min).
Approvals & Compliance
The device is CE marked and RoHS compliant. Specific directives include EN 60947-5-1:2004+A1:2009, EN 60730-1:2012, EN 60730-2-7:2011+AC:2012, EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011, EN 61000-3-2:2014, and EN 61000-3-3:2013. Additional compliance includes EN61010-1:2010 (low voltage) and EN61326-1:2013 (EMC directives).
Key Product Differences
The PTC-16-A is a single-model series. The output contacts are fully isolated from the supply voltage. Per manufacturer warnings, this timer is not intended for medical or life-support systems and should not be used in locations where corrosive or flammable gases could be present.
PDFとマニュアル