검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-MTF

계량 및 혼합용 맞춤형 다중 튜브 유량 시스템, 최대 6개 튜브

  • Configure up to six flow tubes in one frame for multichannel metering or mixing
  • Accuracy ±2% FS (correlated tubes) and repeatability ±0.25% of reading
  • Turn-down ratio up to 10:1 (20:1 with dual floats) for wide range coverage
  • Max operating pressure ~200 psig and temperature up to 250 °F (121 °C)
Series-MTF
시작 189,302 원
계량 및 혼합용 맞춤형 다중 튜브 유량 시스템, 최대 6개 튜브 Series-MTF Series-MTF
loading all models
제품 개요
  • 정확도 ± 2%
  • 정확도 세부 사항 ± 2% FS @ 70 °F (21.1 °C) 및 14.7 psia (1 atm 절대압)
  • 응용 분야 유체 측정 및 제어, 산업 및 제조업
  • 미디어 호환성 정제 공정 / 냉각수, HVAC / 실내 공기
  • 장착 방향 수직
  • 작동 온도, 최대 250 °F
  • 압력 유형 궤간
  • 프로세스 연결 크기 1/8인치
  • 프로세스 연결 유형 NPT 암나사
  • 증명압 최대 200 psi
  • 반복성 ± 0.25%
  • 반복성 주의사항 스케일 판독값의 ±0.25%
  • 시리즈 ID Series-MTF
  • 턴다운비 10:1
  • 턴다운 비율 사양 참고 10:1, 20:1 미터에 설치된 두 개의 플로트 조합

Supported Applications

Dwyer Series MTF Multitube Flow Systems are customizable variable area flow meters designed for multichannel metering, mixing, or monitoring applications. The series supports configurations with up to six different flow tubes featuring various capacities and patterns. Documented media compatibility includes Air, Water, and Gases (specifically for Gas Proportioner Frames).

Operating Conditions & Performance

The Series MTF operates within an ambient temperature limit of 250°F (121°C) with a pressure rating of 200 psig (13.8 bar). Accuracy is specified as ±2% FS @ 70°F (21.1°C) and 14.7 psia (1 atm absolute), with repeatability at ±0.25% of scale reading.

Measurement ranges documented for the series include:

  • Air: 0.07 mL/min to 42094 mL/min
  • Water: 0.28 mL/min to 1261 mL/min
  • Air (SCFM): 0.60 SCFM to 90.0 SCFM

Note that flow rates are given for standard pressure and temperature 70°F (21°C) @ 760 mm Hg.

Configuration Options

The series is configurable across frame sizes, wetted materials, tube types, and valve options to meet specific multichannel requirements.

Frames and Flow Patterns

  • Frame Sizes: 65 mm or 150 mm frames are available. Dimensions vary by the number of tubes installed (ranging from 1 tube to 6 tubes).
  • Patterns: Options include isolated parallel channels, common exhaust with parallel inlets, and common inlet with parallel exhausts.
  • Gas Proportioner Frames: Series MTP frames are offered for gas applications (2 or 3 tube capacity).

Housing and Wetted Materials

  • Housing Components: Anodized aluminum, 316 SS, Polycarbonate (Front Shield), Black anodized aluminum (Side Panels).
  • Wetted Parts: Aluminum or 316 SS frames are available. Flow tubes utilize floats made of Borosilicate glass, Carboloy, or 316 SS.

Flow Tubes and Valves

  • Tube Types: Direct Reading Flow Tubes (SCFM/SCFH scales) and Correlated Flow Tubes (mL/min for Air/Water).
  • Valve Cartridges: Standard 6-turn valves or High Precision 16-turn valves are available as options. Valve selection is based on flow rate ranges in mL/min.

Key Product Differences

The Series MTF distinguishes between frame sizes and wetted material compositions through specific model numbering:

  • 65 mm Frames (MTF-16xx / MTF-26xx): Models with '1' in the series prefix denote Aluminum wetted parts, while '2' denotes 316 SS. The third digit indicates tube capacity (e.g., MTF-1641 is a 4-tube isolated frame).
  • 150 mm Frames (MTF-11xx / MTF-21xx): Similar coding applies where '1' represents Aluminum and '2' represents 316 SS wetted parts.
  • Gas Proportioner Frames (MTP-xxx): Models such as MTP-112, MTP-212, MTP-113, and MTP-213 are designated for gas proportioning with 2 or 3 tube capacities.
  • Valve Options: Standard valves (FV series) cover flow rates from 0 to above 10000 mL/min. High Precision valves (FVH/VA8x series) are segmented for lower ranges starting at 0 to 200 mL/min.
ko-KR
ko_KR
설정 저장